1ASFK00418-VW Beetle Golf Jetta Front Inner & Outer Tie Rod Assembly Pair

Replaces

2000 VW Jetta Front Inner & Outer Tie Rod Assembly Pair

1ASFK00418-543721-2000
Guaranteed to fit: 2000 Volkswagen Jetta

Fit Details

  • Location: Inner & Outer
  • Front or Rear Location: Front

Part Details

  • Quantity: Pair

This part replaces:

  • Moog ES3709A
  • Moog ES3710A
  • OE # 1J0422804H
  • OE # 1J0422803H
FREE SAME DAY SHIPPING
Save 10%
List: $50.95 Save: $5.00
Part 1ASFK00418
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS00840

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   Pair

These Tie Rod Assemblies are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes both inner & outer tie rods
  • Replaces dealer part numbers: 1J0422804H, 1J0-422-804H, 1J0422803H, 1J0-422-803H
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:55)
    • Remove the lug nut caps with a 7mm Allen bit
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:47)
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Record that measurement
    • Loosen the 22mm nut that attaches the inner tie rod to the outer tie rod
    • Use a 6mm Allen wrench and a 19mm wrench to remove the nut at the bottom of the tie rod end
    • Loosen the tie rod by striking the steering knuckle with a hammer
    • Pull the tie rod up and out of the steering knuckle
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:48)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the nut onto the outer tie rod with a 19mm wrench and a 6mm Allen wrench
    • Tighten the 19mm nut to 50 foot-pounds of torque
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Check that this is the same distance as recorded in Step 2
    • Tighten the 22mm nut that attaches the inner tie rod to the outer tie rod
  4. step : Reattaching the Wheel (3:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Attach the lug nut covers

Tools needed for replacement:

    General Tools

  • Measuring Tape
  • Hammer
  • Floor Jack
  • Jack Stands

  • Hex Wrenches

  • 6mm Allen Wrench
  • 7mm Allen Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998Volkswagen Beetle VW Beetle (Built After 6/98 Production Date) Front Inner & Outer Tie Rod Assembly Pair
1999-2010Volkswagen Beetle VW Beetle Front Inner & Outer Tie Rod Assembly Pair
1999Volkswagen Golf VW Golf (Built After 10/98 Production Date) Front Inner & Outer Tie Rod Assembly Pair
2000-2006Volkswagen Golf VW Golf Front Inner & Outer Tie Rod Assembly Pair
1999Volkswagen Jetta VW Jetta (Built After 10/98 Production Date) Front Inner & Outer Tie Rod Assembly Pair
2000-2004Volkswagen Jetta VW Jetta Front Inner & Outer Tie Rod Assembly Pair
2005Volkswagen Jetta VW Jetta (Built Before 12/30/04 Production Date) Front Inner & Outer Tie Rod Assembly Pair

Part Interchange

Brand Label Part Number
DIY Solutions SUS00840
DIY Solutions SUS07412
DIY Solutions SUS07411
MOOG ES3709A
MOOG ES3710A
MOOG Chassis Products ES3710A
MOOG Chassis Products ES3709A

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: SUS00840
Product Reviews
5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Factory quality
These tie rods were a perfect OEM fit resulting in zero troubles with installation. My car is now aligned again driving like new. I recommend this product.
April 17, 2018
Amazing!
Fix great installed easy with the help of a local auto store renting the master inner tie rod tool took me maybe 20 minutes to installed and get back together very happy with these for the price of getting both sides
August 21, 2018
rod assembly front pair
received rod assembly front pair as described and installed same. I am satisfied with tie rods and price.Thank You.
October 6, 2018
Great quality.
February 17, 2020
Just right
Part fit perfect
March 16, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Volkswagen is a registered trademark of Volkswagen AG. 1A Auto is not affiliated with or sponsored by Volkswagen or Volkswagen AG. See all trademarks.

VW Beetle Golf Jetta Front Inner & Outer Tie Rod Assembly Pair-1ASFK00418 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Volkswagen Jetta with these options.