1APBS00412-VW Beetle Golf Jetta Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set

Replaces

VW Beetle Golf Jetta Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set

1APBS00412

Part Details

  • Brake Rotor Type: Cross Drilled & Slotted
  • Rear Brake Rotor Diameter: 9.13 in. (232mm)
  • Rear Brake Rotor Venting Type: Solid
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Front Brake Rotor Diameter: 11.02 in. (280mm)
  • Product Line: Performance
  • Set Quantity: 4 Piece
FREE SAME DAY SHIPPING
Save 44%
List: $160.95 Save: $71.00
Part 1APBS00412
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BRA13961

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Set Quantity:   4 Piece
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   11.02 in. (280mm)
  • Rear Brake Rotor Diameter:   9.13 in. (232mm)
  • Front Brake Rotor Venting Type:   Vented
  • Product Line:   Performance

Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Front 11.02" (280mm) diameter
  • Rear 9.13" (232mm) diameter
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:48)
    • Remove the lug nut covers with a 7mm Allen Wrench
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel will not come off, thread one lug nut and use a pry bar to loosen the wheel
  2. step : Inspecting the Brakes (1:54)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:04)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (2:39)
    • Remove the two 8mm Allen bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips head screw from the rotor
    • If the screw will not remove, drill it out
    • Pull the rotor off
  5. step : Preparing the New Brakes (3:17)
    • Put a large C-clamp on to the brake caliper
    • Apply pressure to the brake piston
    • Twist the piston in with slip joint pliers and adjust the C-clamp to maintain pressure
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Clean the brake pad slides with a wire brush
    • Check the caliper slides for smooth movement
    • If the caliper slides do not move smoothly, clean them and apply grease
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  6. step : Installing the New Brake Rotor (4:54)
    • Slide the rotor on
    • Insert the Phillips screw into the brake rotor
    • Put the bracket back into place
    • Start the two 8mm Allen bolts by hand
    • Tighten the bolts to 50 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:42)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the two 13mm bolts
  8. step : Reattaching the Wheel (6:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Remove the lug nut key
    • Put on the lug nut caps
  9. step : Testing the Brakes (6:55)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Hex Wrenches

  • 7mm Allen Wrench
  • 8mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this item directly replace the stock rotors on a 1998 VW Beetle with the 2.0 motor?
Kenny R September 27, 2016
yes
William H July 26, 2017

Fits the following Makes:

Year Make Model Description
1998-2007Volkswagen Beetle VW Beetle L4 1.9L Diesel Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set
1998-2005Volkswagen Beetle VW Beetle L4 2.0L Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set
2006-2010Volkswagen Beetle VW Beetle L5 2.5L Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set
2000-2006Volkswagen Golf VW Golf L4 2.0L Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set
1999Volkswagen Jetta VW Jetta L4 2.0L with 5 Lug Wheels Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set

Part Interchange

Brand Label Part Number
Aimco 34143
Aimco 34144
Bendix PRT5238
Bendix PRT5239
DuraGo BR34143
DuraGo BR34144
Raybestos Brakes 96778
Raybestos Brakes 96779
Wagner BD125642
Wagner BD125647
Wagner BD125740

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BRA13961
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
These rotors are great! Haven’t had any problems & they look awesome ??. For someone (myself) who prefers decent quality over price, these rotors are a good quality for a very good price!!
June 27, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


VW Beetle Golf Jetta Front & Rear Driver & Passenger Side 4 Piece Performance Brake Rotor Set-1APBS00412 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.