Replaces

VW Audi Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair TRQ Performance

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Lug Count:   5 Lug
  • Brake Rotor Venting Type:   Vented
  • Quantity:   Pair
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Brake Rotor Diameter:   11.26 in. (286mm)
  • Product Line:   Performance

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a pick
    • Loosen one of the lug bolts with a key found by the spare tire
    • Loosen the 17mm lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:23)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:53)
    • Pry off the caps on the brake caliper
    • Remove the T47 bolts from the brake caliper
    • Pry off the wire clip with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:47)
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 screw from the rotor
    • Spray rust penetrant around the edge of the hub
    • Strike the hub area of the rotor with the ball end of a ball peen hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Tighten the T30 screw to the rotor
    • Clean the brake caliper bracket with a wire brush
    • Put the bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:51)
    • Use a large C-clamp and the old pad to push the piston back
    • Apply brake grease to the back of the pad and their contact points in the bracket
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the T47 bolts by hand
    • Tighten bolts to 30 foot-pounds
    • Push the wire clip onto the brake caliper
    • Replace the brake caliper caps
  7. step : Reattaching the Wheel (6:42)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (7:34)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Star Drivers & Sockets

  • T30 Bit
  • T47 Torx Socket

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2007Audi A3 Audi A3 Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2008Audi A3 Audi A3 with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2009-2013Audi A3 Audi A3 Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2006-2007Audi A3 Quattro Audi A3 Quattro Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2008Audi A3 Quattro Audi A3 Quattro with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2009-2013Audi A3 Quattro Audi A3 Quattro Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2009-2014Volkswagen CC VW CC Front Wheel Drive Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2007-2010Volkswagen Eos VW Eos Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2006Volkswagen GTI VW GTI L4 2.0L Turbo Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2007-2010Volkswagen GTI VW GTI Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2011-2013Volkswagen GTI VW GTI with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2005-2006Volkswagen Jetta VW Jetta L5 2.5L with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2006Volkswagen Jetta VW Jetta TDI with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2007-2010Volkswagen Jetta VW Jetta with 11.25 in. (286mm) Diameter Rotors Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2006-2007Volkswagen Passat VW Passat Front Wheel Drive Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2008-2010Volkswagen Passat VW Passat Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair
2009-2014Volkswagen Tiguan VW Tiguan Rear Cross Drilled & Slotted Premium G-Coated Performance Brake Rotor Pair

Part Interchange

Brand Label Part Number
Aimco 34399
Bendix PRT5683
Bendix PRT6059
DuraGo BR900466
Raybestos Brakes 980791
Raybestos Brakes 980684
Wagner BD126477

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1APBR01018
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BRA74752