Replaces

VW Audi Front & Rear Ceramic Performance Brake Kit

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Vented
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.28 in. (312mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   11.26 in. (286mm)
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Brake Pad Specifications:

  • Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver Side) & RH (Passenger Side)Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheel
  • 12.28" (312mm) diameter vented front
  • 11.26" (286mm) diameter vented rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a pick
    • Loosen one of the lug bolts with a key found by the spare tire
    • Loosen the 17mm lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:23)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:53)
    • Pry off the caps on the brake caliper
    • Remove the T47 bolts from the brake caliper
    • Pry off the wire clip with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:47)
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 screw from the rotor
    • Spray rust penetrant around the edge of the hub
    • Strike the hub area of the rotor with the ball end of a ball peen hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Tighten the T30 screw to the rotor
    • Clean the brake caliper bracket with a wire brush
    • Put the bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:51)
    • Use a large C-clamp and the old pad to push the piston back
    • Apply brake grease to the back of the pad and their contact points in the bracket
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the T47 bolts by hand
    • Tighten bolts to 30 foot-pounds
    • Push the wire clip onto the brake caliper
    • Replace the brake caliper caps
  7. step : Reattaching the Wheel (6:42)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (7:34)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Star Drivers & Sockets

  • T30 Bit
  • T47 Torx Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do I need the bag computer to reset the brake calipers? Everything Ive read says I need it.
Anthony G March 14, 2019
Thank you for contacting us. We are unclear about what it is you are asking. In order to reset the caliper, you would just need to press in the pistons. This is strictly a mechanical part. Thank you.
Jessica D March 14, 2019

Fits the following Makes:

Year Make Model Description
2006-2007Audi A3 Audi A3 Front & Rear Ceramic Performance Brake Kit
2009-2013Audi A3 Audi A3 Front & Rear Ceramic Performance Brake Kit
2006-2007Audi A3 Quattro Audi A3 Quattro Front & Rear Ceramic Performance Brake Kit
2009-2013Audi A3 Quattro Audi A3 Quattro Front & Rear Ceramic Performance Brake Kit
2009-2013Volkswagen CC VW CC Front Wheel Drive Front & Rear Ceramic Performance Brake Kit
2007-2010Volkswagen Eos VW Eos Front & Rear Ceramic Performance Brake Kit
2006-2010Volkswagen GTI VW GTI Front & Rear Ceramic Performance Brake Kit
2005-2006Volkswagen Jetta VW Jetta L5 2.5L with 11.25 in. (286mm) Diameter Rear Rotors with 12.28 in. (312mm) Diameter Front Rotors Front & Rear Ceramic Performance Brake Kit
2007-2009Volkswagen Jetta VW Jetta TDI with 11.25 in. (286mm) Diameter Rear Rotors with 12.28 in. (312mm) Diameter Front Rotors Front & Rear Ceramic Performance Brake Kit
2007-2009Volkswagen Jetta VW Jetta L4 2.0L Turbo with 11.25 in. (286mm) Diameter Rear Rotors with 12.28 in. (312mm) Diameter Front Rotors Front & Rear Ceramic Performance Brake Kit
2006-2007Volkswagen Passat VW Passat L4 2.0L Turbo Front Wheel Drive Front & Rear Ceramic Performance Brake Kit
2008-2010Volkswagen Passat VW Passat L4 2.0L Turbo Front & Rear Ceramic Performance Brake Kit

Part Interchange

Brand Label Part Number
Aimco 34399
Aimco 34279
Bendix PRT5683
Bendix PRT6059
Bendix PRT5639
DuraGo BR900466
DuraGo BR900468
Raybestos MGD1107CH
Raybestos MGD1108CH
Raybestos EHT1108H
Raybestos EHT1107H
Raybestos Brakes EHT1107H
Raybestos Brakes EHT1108H
Raybestos Brakes MGD1107CH
Raybestos Brakes MGD1108CH
Raybestos Brakes 980684
Raybestos Brakes 980791
Raybestos Brakes 980383
Wagner BD126476
Wagner BD126477

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1APBS00721
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS03284