Replaces

Volvo S60 S80 V70 XC70 XC90 Front Driver or Passenger Side Sway Bar Link

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Specifications:

  • Brand New Sway Bar Link
  • Fits LH (Driver Side) or RH (Passenger Side) Front
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Tire (0:36)
    • With the tire on the ground, use a 19mm wrench and ratchet to loosen the tire's lug studs
    • Raise and support the vehicle with a jack and jack stands
    • Remove the lug studs
    • Remove the wheel
  2. step : Removing the Sway Bar Link (1:41)
    • Use an 18mm wrench and a T40 Torx bit and ratchet to remove the upper sway bar link nut and push out the link
    • Use a 15mm wrench and a T30 Torx bit and ratchet to remove the lower sway bar link nut
    • Pull out the sway bar link
  3. step : Installing the Sway Bar Link (3:46)
    • Position the sway bar link, bringing it through on the inside of the ABS cable
    • Put the top nut on first
    • Use a pry bar to hold the link in place and put the lower nut on
    • Use a 15mm wrench and a 5mm Allen head mount on a Torx bit with a ratchet to tighten the lower nut
    • Use an 18mm wrench and a 5mm Allen head mount on a Torx bit with a ratchet to tighten the upper nut
  4. step : Installing the Tire (6:16)
    • With the car raised, insert two 14mm x 1.25 wheel stud pins into the wheel bearing to help hold the tire in place as you reinstall it
    • Line up the tire with the two pins
    • Insert and tighten three of the lug studs
    • Remove the two wheel stud pins and insert and tighten the remaining two lug studs
    • With weight on the lowered car, torque the lug studs to 103 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Star Drivers & Sockets

  • T30 Bit
  • T40 Bit

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench
  • 19mm Wrench

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2001-2009Volvo S60 Volvo S60 Front Driver or Passenger Side Sway Bar Link
1999-2006Volvo S80 Volvo S80 Front Driver or Passenger Side Sway Bar Link
2001-2007Volvo V70 Volvo V70 Front Driver or Passenger Side Sway Bar Link
2003-2007Volvo XC70 Volvo XC70 Front Driver or Passenger Side Sway Bar Link
2003-2014Volvo XC90 Volvo XC90 Front Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
MOOG K80501
MOOG Chassis Products K80501

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSL00079
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.