Replaces

Volvo S60 S80 V70 XC70 XC90 Driver or Passenger Side Engine Mount

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This replacement engine mount is just what you need to keep your motor firm in place!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side)
  • Replaces dealer part number: 30778951-1, 307789511
  • Direct replacement
  • Built to strict quality control standards

Replace your broken engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Front Engine Mount (0:32)
    • Remove the 18 mm nut from the 15 mm upper engine mount bolt and remove the bolt
    • Remove the 18 mm nut from the 17 mm bolt, and remove the bolt at each end of the upper brace
    • Remove the upper brace
    • Remove the 15 mm front engine mount nut
    • Remove the two 10 mm bolts to remove the air collector
    • Place the new mount in the lower area where it can be reached from under the vehicle
    • Raise and support the vehicle
    • Place a jack on the corner of the oil pan and raise the engine to support it
    • Remove the two bolts to disconnect the transmission mount bracket from the transmission case
    • Remove the 15 mm front engine mount bolt, which is accessible through an opening in the frame
    • Raise the engine further to remove the engine mount
  2. step : Installing the Front Engine Mount (6:38)
    • Insert the stud of the front engine mount into position, making sure to align the guide tab correctly
    • Lower the engine to position the engine mount bolt hole
    • Install the 15 mm bolt into the engine mount
    • Continue lowing the engine so that it is resting on the mount
    • Tighten the 15 mm engine mount bolt
    • Install the two bolts to connect the transmission mount to the transmission case
    • Lower the vehicle
    • Remove the old engine mount
    • Install the 15 mm engine mount nut to the engine mount stud
    • Insert the air collector tube into the air filter box and position the air collector
    • Secure the air collector with the two 10 mm bolts
    • Position the upper brace and secure it with the 17 mm bolts and 18 mm nuts
    • Secure the upper engine mount to the upper brace with the 15 mm bolt and 18 mm nut
    • Torque the support brace bolts to 85 N m
    • Torque the upper engine mount bolt to 85 N m

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 17mm Socket
  • 18mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 18mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2001-2004Volvo S60 Volvo S60 L5 2.3L Rear Driver or Passenger Side Lower Engine Mount
1999Volvo S80 Volvo S80 L6 2.8L Front Driver or Passenger Side Engine Mount
2000Volvo S80 Volvo S80 L6 2.9L Front Driver or Passenger Side Engine Mount
2001Volvo S80 Volvo S80 L6 2.8L Rear Driver or Passenger Side Lower Engine Mount
2002-2004Volvo S80 Volvo S80 L6 2.9L Rear Driver or Passenger Side Lower Engine Mount
2001-2002Volvo V70 Volvo V70 X/C Front Driver or Passenger Side Engine Mount
2003-2007Volvo XC70 Volvo XC70 Front Driver or Passenger Side Engine Mount
2003-2005Volvo XC90 Volvo XC90 L6 2.9L Rear Driver or Passenger Side Lower Engine Mount
2003-2006Volvo XC90 Volvo XC90 L5 2.5L Rear Driver or Passenger Side Lower Engine Mount
2007-2014Volvo XC90 Volvo XC90 V6 3.2L Rear Driver or Passenger Side Lower Engine Mount

Part Interchange

Brand Label Part Number
DEA A4003
DEA Products A4003
DIY Solutions EMT00409
Marmon Ride Control A4003

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
There are no reviews for this item.
Only 4 left in stock
Part 1AEMT00244
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DEA
Brand #: A4003