Replaces

Volkswagen Beetle Golf Jetta Tie Rod Assembly Front Pair - 1ASFK00418

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

These Tie Rod Assemblies are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes both inner & outer tie rods
  • Replaces dealer part numbers: 1J0422804H, 1J0-422-804H, 1J0422803H, 1J0-422-803H
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:55)
    • Remove the lug nut caps with a 7mm Allen bit
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:47)
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Record that measurement
    • Loosen the 22mm nut that attaches the inner tie rod to the outer tie rod
    • Use a 6mm Allen wrench and a 19mm wrench to remove the nut at the bottom of the tie rod end
    • Loosen the tie rod by striking the steering knuckle with a hammer
    • Pull the tie rod up and out of the steering knuckle
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:48)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the nut onto the outer tie rod with a 19mm wrench and a 6mm Allen wrench
    • Tighten the 19mm nut to 50 foot-pounds of torque
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Check that this is the same distance as recorded in Step 2
    • Tighten the 22mm nut that attaches the inner tie rod to the outer tie rod
  4. step : Reattaching the Wheel (3:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Attach the lug nut covers

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench
  • 7mm Allen Wrench

  • General Tools

  • Measuring Tape
  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Factory quality
These tie rods were a perfect OEM fit resulting in zero troubles with installation. My car is now aligned again driving like new. I recommend this product.
April 17, 2018
Amazing!
Fix great installed easy with the help of a local auto store renting the master inner tie rod tool took me maybe 20 minutes to installed and get back together very happy with these for the price of getting both sides
August 21, 2018
rod assembly front pair
received rod assembly front pair as described and installed same. I am satisfied with tie rods and price.Thank You.
October 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998Volkswagen Beetle VW Beetle Front Inner & Outer Tie Rod Assembly (Built After 6/98 Production Date) Pair
1999-2010Volkswagen Beetle VW Beetle Front Inner & Outer Tie Rod Assembly Pair
1999Volkswagen Golf VW Golf Front Inner & Outer Tie Rod Assembly (Built After 10/98 Production Date) Pair
2000-2006Volkswagen Golf VW Golf Front Inner & Outer Tie Rod Assembly Pair
1999Volkswagen Jetta VW Jetta Front Inner & Outer Tie Rod Assembly (Built After 10/98 Production Date) Pair
2000-2004Volkswagen Jetta VW Jetta Front Inner & Outer Tie Rod Assembly Pair
2005Volkswagen Jetta VW Jetta Front Inner & Outer Tie Rod Assembly (Built Before 12/30/04 Production Date) Pair
Part #: 1ASFK00418


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:33 min)