Vapor Canister Purge Solenoid Valve ACDelco 214-641 - ACEMX00002

AC DELCO 214-641 [CANISTER PURGE SOLENOID VALVE]

This AC DELCO Vapor Canister Purge Solenoid Valve is a new part. It is the same piece that you would receive if you purchased it from your local GM dealer.

It is used to control the flow of vapors from the EVAPORATIVE system to the intake manifold. It is controlled by the vehicles main computer or ECM. When the ECM sends the activation signal, a plunger in the valve will move to seal the vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative loss system components. This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative loss system is depressurized and allows "EVAP Control System (Small Leak)" diagnosis. If this valve is defective, the Check Engine Light will illuminate to Set with Small Leak Diagnosis. Some of the trouble codes associated with this part being defective are: P1456, P1448, P0449, and P0455.

Features:

• Brand new AC DELCO Solenoid Valve
• Replaces dealer part number: 1997278, 1997251, 01997278
• Direct replacement
  
• Built to strict quality control standards

Note: For 2004 models there were two possible purge valves listed: OE #'s 1997279, 1997252; or OE # 25932571. We recommend contacting your local dealership with your VIN to verify the correct one for your specific application.

Over time and daily use the electronic valve can wear out causing the check engine light to set. If the valve is the problem, replace it now with this great AC DELCO part.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New