1ASTG00008-Toyota Sequoia Tundra Power Rack & Pinion Assembly
false

Replaces

12

2006 Toyota Tundra Power Rack & Pinion Assembly

Guaranteed to fit 2006 Toyota Tundra
00-06 Toyota Tundra; 01-07 Sequoia Power Steering Rack & Pinion Assembly
$ 394.95
$491.95
20% OFF
$491.95
20% OFF
FREE SAME DAY SHIPPING
TRQ
PSA67690
In Stock
Part 1ASTG00008
1
Add to Cart
Only 10 left in stock

Orders must be placed by 2pm ET
Part 1ASTG00008
In Stock
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Description

Vehicle Fit

Warranty & Shipping

Part Details

  • Operation:   Power

Specifications:

  • Brand New Power Rack & Pinion Assembly
    • not remanufactured
    • no core charge
  • Includes:
    • Gear assembly
    • Inner tie rods
    • Rack boots
  • Direct replacement
  • Built to strict quality control standards

Rubber seals and hoses can become brittle from age or swollen from harmful chemical contaminates.  To avoid leaks or premature failure, we recommend replacing your power steering hoses when installing a new steering rack.  

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

Fits these Makes

Year Make Model Description
2001-2007Toyota Sequoia Toyota Sequoia Power Rack & Pinion Assembly
2000-2006Toyota Tundra Toyota Tundra Power Rack & Pinion Assembly

Part Interchange

Brand Label Part Number
DIY Solutions SUS08241

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

TRQ
PSA67690
In Stock
Part 1ASTG00008
Product Reviews
Loading reviews
4.92/ 5.0 12
Rack and pinion for a Toyota
Scott
April 3, 2018
I'm a Toyota tech. My wife's Sequoia needed a steering rack. I purchased a steering rack from 1A Auto. Very nice quality, great price (alot cheaper than the factory Toyota steering rack) & fast shipping. I'm very pleased. The quality of the part was just as good as the factory Toyota parts I install everyday! Thank you A+++++
Exactly as advertised
P
November 28, 2018
Excellent fit and finish, installation went as as expected. Would buy parts from 1aauto again
2001 Tundra rack and pinion assembly with steering parts
B
December 27, 2018
I received the order very quickly within a few days even with the Christmas season busy buying period. Products purchased have not been installed yet but look to be good quality. I bought these items at 1AAuto due to mainly the purchase price and included shipping. Very easy to search and purchase online. GB
2001 Tundra - perfect fit and operation
Cody
February 22, 2019
I needed to replace my rack and pinion on my 2001 tundra. This piece came at a great price, with a great warranty, and was an exact fit. It looked and felt the same quality as the OEM part that failed. 1A Auto has quickly became my go-to parts destination.
Excellent!
G.
March 19, 2019
Great service, quality product.
Very happy
Von
June 13, 2019
I’m very satisfied and the salesperson is very helpful and friendly.
Rack& Pinion
Lee
July 19, 2019
Price was right, delivery was fast and free and it all fit perfectly. Thank You, Lee
I
August 2, 2019
Good
Saved a ton!!
Brian
November 17, 2019
Quick shipping and good packaging. Part matched the OEM perfect and works great. Overall saved me over 400.00 from a local shop.
perfect fit
dave
November 23, 2019
shipped on time,best price i found,only reason i gave it 4 stars is it didn't include a dust cover for the steering gear shaft
2003 Tundra
Aaron
January 31, 2020
Thanks to 1A Auto my Tundra is back on the road. I had the frame replaced by a local dealership. At that time they had to replace the rack and pinion and hoses because they couldn't remove the old lines without damaging them. After only about 12k miles the passenger outer seals began to leak badly. Lucky to get home before losing most of the fluid. I replaced the outer seals 3 times over the next 15k miles. Finally had to bite the bullet and replace the whole rack. I chose 1A Auto because I have had good luck with parts in the past. The price was good and I received it in less than a week during the Holidays. I am looking forward to the reliability of my Tundra once again thanks!
01 Toyota Tundra 2wd.
Jim
April 4, 2021
Easy from the get go. Great purchase and fast shipping. Great product. My only complaint is it did not come with the o-rings where it connects to the lines.
Customer Q&A
Is an alignment recommended after installation ?
January 7, 2019
10
Yes it is but after I put it in I never did and it was fine. If you see any abnormal wear on your tires you may want to go get it aligned.
January 7, 2019
10
Yes
January 7, 2019
10
Not only recommended but required.
January 7, 2019
10
Yes. For sure
January 8, 2019
10
Highly recommended.
January 8, 2019
10
yes. because even if you had it out I always got a alignments then you now it is true.
January 8, 2019
10
I went ahead and had one done.
January 8, 2019
10
Yes it is even if you think it is ok!! replace outer tie rod ends also that way you only have to align it 1 time for a while...
January 8, 2019
10
Yes you most definitely need one.
March 13, 2019
Installed and filled but power steering line leaking at fitting. Not crossthreaded and its in tight. Still a steady flow coming out in between nut and line. Did not leak or anything happen before. Any suggestions?
January 27, 2019
10
The part may not be able to fit correctly for your vehicle. If this was an item purchased through us please give us a call so we can further assist you.
January 27, 2019
What brand is this part?
March 8, 2019
10
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications.
March 8, 2019
Does this part come with all bushings ?
August 18, 2019
10
This item will come with the bushings that you would need for the installation. Please let us know if you have any further questions.
August 18, 2019
10
Yes bolt right on
August 21, 2019
10
No, you have to purchase them separately.
August 26, 2019
Will this fit a 4 wheel drive 2002 tundra?
September 17, 2019
10
Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
September 17, 2019
Did the rack and pinion come with new mounting bushings?
October 10, 2019
10
No, it did not. You have to buy them separately.
October 10, 2019
10
I believe so my mechanic didn't ask me to buy anything else.
October 10, 2019
10
This assembly will not come with the bushings. I have attached a list of the parts that the kits include: Gear assembly Inner tie rods Rack boots Please let us know if you have any further questions.
October 10, 2019
Any experience on a 2001 Toyota sequoia 4x4?
March 7, 2020
10
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. The fit and function will be the same if not better than OEM. According to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
March 7, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation. See all trademarks.

Enter Vehicle Year Make Model

Not all parts are the perfect fit. Enter your Vehicle and we'll confirm fit, or help get you to one that will.

Toyota Sequoia Tundra Power Rack & Pinion Assembly TRQ PSA67690-1ASTG00008 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Steering Rack and Gear Boxes

This part will only fit a 2006 Toyota Tundra with these options.

If your option isn't listed search Steering Rack and Gear Boxes