Toyota Sequoia Tundra Lighting Kit - 1ALHT00102

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Kit Includes:
      (2) Parking Lights
      (2) Headlights


  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 81110-0C030, 81150-0C030, 81520-0C030, 815200C030, 811100C030, 811500C030, 81510-0C030, 815100C030
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Includes lenses & housings
  • Bulbs not included
These lights are great replacements and have good cost savings over lights from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the Headlight Bulbs (0:55)
    • Reach down behind the headlight and pull the connector from the headlight.
    • Remove the rubber boot.
    • Push the retainer in and up.
    • Pull the bulb free.
    • Put the new one in place and put the retainer in and down.
    • Replace the rubber boot.
    • Reconnect the harness.
  2. step : Removing the Headlight Assembly (2:28)
    • Remove the Phillips clip above the side light.
    • Pull the side light forward and out.
    • Disconnect the connectors on the back of the side light.
    • Remove the four 10mm bolts securing the headlight.
    • Disconnect the connecter and pull the headlight up and out.
  3. step : Replacing the Headlight Assembly (4:48)
    • Line up the new headlight and slide it into place.
    • Replace the four 10mm bolts.
    • Reconnect the harness.
    • If you need to adjust the headlight angle do it before replacing the side light.
    • Reconnect the side light.
    • Line it up and push it in to place.
    • Replace the Phillips clip above the side light.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.25/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
The new headlights made my 06 Tundra with 324000 miles see again. Easy install-fit great . Would reccommend. 1Aauto great service, will use again.
March 3, 2017
Great replacement lights
These were easy to install and made a tremendous difference in the appearance not to mention improved vision at night! Cant believe I waited so long to replace the fpggy ones!
August 23, 2017
Head light and turn signal replacement parts
The parts were delivered fast, I watched the video which was helpful, the biggest problem I have is that the turn signal and head light do not line up correctly, so they are not flush with each other. I found the turn signal has way to much molded plastic to allow them to sit flush, I spent a long time with a dremel tool to remove excess plastic just so I could get the pin back in the hold the turn signal in place. I also had a problem with the lamp socket, the electrical pins are cheaply made, so I just used the old lamp sockets.
August 18, 2018
Absolutely great upgrade!
This was so easy and makes a huge difference in the way my 2007 Sequoia looks. The bulbs that come pre-installed are really bright. Night lighting is like new again. Install is very simple. Watch video. Took just (20 minutes for side one, (10j minutes side two. Would highly recommend for the price. Get the lamps and signals that this complete kit has. (Instead of just doing the headlamps).
September 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2007Toyota Sequoia Toyota Sequoia 4 Piece Set Lighting Kit
2005-2006Toyota Tundra Toyota Tundra Double Cab 4 Piece Set Lighting Kit
Part #: 1ALHT00102

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:59 min)