Toyota Sequoia Tundra Corner Light - 1ALPK00501

This replacement front side marker lamp is just what you need to get your vehicle in good looking form again!

Specifications:

• LH (Driver Side)
• Replaces dealer part number: 81520-0C020, 815200C020
• Injection molded plastic
• DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
• Does not include bulbs or wiring

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct fit replacement for OEM assembly

Uses same wiring as original assembly.  No cutting or splicing required.

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Tail Light (0:34)

• Remove the Phillips clip on the parking light with a Phillips screwdriver
• Disconnect the parking light wiring harness

step : Servicing the Bulbs (1:39)

• Twist the bulb socket counterclockwise out of the light
• Pull the bulb off of the socket
• Push on the new bulb
• Twist the bulb clockwise into the light

step : Installing the Tail Light (2:00)

• Connect the parking light wiring harnesses
• Insert the parking light into place
• Push in the Phillips clip