Toyota Sequoia Sienna Liftgate Handle Dorman 79600 - DMBTH00001


This replacement liftgate handle is just what you need to get your vehicle in good working form again!


  • Brand New Dorman Liftgate Handle
  • Black plastic textured finish
  • Direct replacement for original plastic version
  • Built to strict quality control standards
  • Replaces a broken or damaged lift gate handle

This part is a direct bolt on part built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

WARNING:  This product can expose you to chemicals including Butyl benzyl phthalate (BBP)d, which is known to the State of California to cause birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the tailgate hatch handle (1:00)
    • Use a screwdriver to remove the grommet located above the pull.
    • Remove the three 10 mm bolts.
    • Pull off the panel.
    • Unclip the latch handle.
    • Remove the three 10 mm nuts securing the back panel.
    • Unscrew the two screws anchoring the handle to the back panel.
  2. step : Install the new handle (4:15)
    • Screw the handle into the back panel.
    • Bolt the three 10 mm bolts back in to anchor the back panel to the door.
    • Clip the latch handle mechanism back into place.
    • Clip the tailgate panel back on.
    • Bolt in the three 10 mm bolts and put the grommets back over the bolt cavities.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good quality
I installed this with little effort, it works better than the original. The feel of it is way more solid, I expect that this part will last for years without issue.
August 10, 2018
6 months ago
it would not fit properly
The construction looked good but was bent at an angle that made it sticking out from the body too much. the bend was in a place we could not adjust or tweak it to fit correctly. We have returned the handle assy.
May 4, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2007Toyota Sequoia Toyota Sequoia Liftgate Handle Dorman 79600
1998-2003Toyota Sienna Toyota Sienna Liftgate Handle Dorman 79600

This part replaces:

  • Dorman 79600
  • OE # 690900C080
  • OE # 6909008010
Only 2 left in stock
Part #: DMBTH00001

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 79600

How-to Video:

(08:14 min)