Toyota Pontiac Scion Driver & Passenger Side 4 Piece Exterior Door Handle Set Dorman 1ADHS00885

Paint To Match Note:

"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Butyl benzyl phthalate (BBP)d, which is known to the State of California to cause birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

This video shows the process on the driver side of the vehicle, which is equipped with a lock cylinder. If the passenger side on your vehicle is not equipped with a lock cylinder, the process remains the same.

step : Removing the Exterior Door Handle (0:23)

• Remove the access cap from the side of the door
• Loosen the T30 screw accessed through the side of the door
• Pry out the the door handle cover
• Slide the door handle rearward to remove it
• Pry the handle trim from the lock cylinder (driver side only)

step : Installing the Exterior Door Handle (2:50)

• Insert the door handle and slide it forward
• Install the handle trim on the lock cylinder (driver side only)
• Install the door handle cover
• Tighten the T30 screw to secure the door handle cover
• Install the access cap