1AEST00376-Toyota Lexus Scion Starter


Toyota Lexus Scion Starter DIY Solutions ECS00157


This part replaces:

  • Lester 7825
  • TYC 1-17825
  • OE # 2810028040
  • OE # 281000A010
  • OE # 2810020020
  • OE # 2810028041
  • OE # 2810020021
Save 9%
List: $177.95 Save: $16.00
Only 10 left in stock
Part 1AEST00376
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: ECS00157
Vehicle Fit
Warranty & Shipping
How-To & Tools


  • Brand New Starter
  • No core charge
  • Direct replacement
  • Built to strict quality control standards

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Disconnecting the Battery (0:27)
    • Loosen the negative battery terminal with a 10mm wrench
  2. step : Removing the Air Intake Box (0:41)
    • Pry up the seven body clips from the shroud cover with a flat blade screwdriver by pressing in the center and prying them up
    • Remove the shroud cover
    • Disconnect the vacuum line from the air intake tube
    • Loosen the 10mm bolts from the hose clamp
    • Remove the three 10mm bolts from the engine air filter housing
    • Disconnect the MAF sensor
    • Pull back the air filter housing clips
    • Disconnect the vacuum lines from the air filter housing cover
    • Lift the cover
    • Unclip the wiring harness from the air intake box cover
    • Remove the housing cover and the air intake tube from the throttle body
    • Remove the engine air filter
    • Unclip the vacuum line from its holster to the left of the air intake box
    • Unclip the MAF sensor from the air box
    • Pull the air intake box straight up from its grommets
    • Remove the 10mm bolts from the air intake dam
    • Set the air intake dam to the side
  3. step : Removing the Starter (4:25)
    • Pull back the boot from the positive cable from the starter
    • Remove the bolt from the positive cable with a 12mm wrench
    • Set the positive cable from the starter to the side
    • Disconnect the wiring harness from the starter
    • Remove the 14mm bolts from the starter
    • Remove the starter
  4. step : Inspecting the Starter (7:01)
    • If the starter's ground wire is corroded or broken, the issue is the starter
    • If a whirring sound was the cause and the gears are worn, inspect the flywheel
  5. step : Installing the Starter (7:58)
    • Insert the starter into place
    • Tighten the 14mm bolts to the starter
    • Torque the 14mm mounting bolts to 27 foot-pounds
    • Connect the solenoid wiring harness
    • Connect the positive cable
    • Tighten the bolt firmly to the positive cable with a 12mm wrench
    • Attach the boot to the positive cable
  6. step : Installing the Air Box (10:07)
    • Connect the air dam and the air box
    • Place the air box and dam in simultaneously
    • Connect the vacuum lines to the air box
    • Tighten the three 10mm bolts to the air box
    • Tighten the two 10mm bolts to the air dam
    • Clip in the vacuum line to the left side of the air box
    • Clip in the MAF sensor harness to the back of the air box
    • Insert the engine air filter into place
    • Connect the prongs to the top of the air box and seat it into place
    • Pull the clamps up to the air box to secure it
    • Connect the MAF sensor harness
    • Connect the two vacuum lines
    • Connect the air intake tube
    • Tighten the 10mm bolt to the air intake hose clamp
  7. step : Connecting the Battery (13:10)
    • Tighten the negative battery terminal with a 10mm wrench
    • Insert the front shroud to the radiator
    • Clip in the seven clips

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 12mm Wrench

Fits the following Makes:

Year Make Model Description
2002-2003Lexus ES300 Lexus ES300 V6 3.0L Starter
2004-2006Lexus ES330 Lexus ES330 V6 3.3L Starter
2007-2013Lexus ES350 Lexus ES350 V6 3.5L Starter
2004-2006Lexus RX330 Lexus RX330 V6 3.3L Starter
2007-2009Lexus RX350 Lexus RX350 V6 3.5L Starter
2005-2010Scion tC Scion tC L4 2.4L Starter
2008-2013Scion xB Scion xB L4 2.4L Starter
2005-2013Toyota Avalon Toyota Avalon V6 3.5L Starter
2002-2006Toyota Camry Toyota Camry V6 3.0L Starter
2002-2009Toyota Camry Toyota Camry L4 2.4L Starter
2004-2006Toyota Camry Toyota Camry V6 3.3L Starter
2007-2009Toyota Camry Toyota Camry V6 3.5L Starter
2012-2013Toyota Camry Toyota Camry L4 2.5L Starter
2012-2013Toyota Camry Toyota Camry V6 3.5L Starter
2004-2007Toyota Highlander Toyota Highlander V6 3.3L Starter
2004-2007Toyota Highlander Toyota Highlander L4 2.4L Starter
2008-2009Toyota Highlander Toyota Highlander V6 3.5L Starter
2006-2008Toyota Rav4 Toyota Rav4 L4 2.4L Starter
2006-2008Toyota Rav4 Toyota Rav4 V6 3.5L Starter
2004-2006Toyota Sienna Toyota Sienna V6 3.3L Starter
2007-2010Toyota Sienna Toyota Sienna V6 3.5L Starter
2012-2013Toyota Sienna Toyota Sienna V6 3.5L Starter
2012Toyota Sienna Toyota Sienna L4 2.7L Starter
2002-2008Toyota Solara Toyota Solara L4 2.4L Starter
2002-2003Toyota Solara Toyota Solara V6 3.0L Starter
2004-2008Toyota Solara Toyota Solara V6 3.3L Starter
2009-2013Toyota Venza Toyota Venza L4 2.7L Starter
2009-2013Toyota Venza Toyota Venza V6 3.5L Starter

Part Interchange

Brand Label Part Number
Bosch STR-8278
DIY Solutions ECS00157
Lester 17825
TYC 1-17825

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: ECS00157
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
March 1, 2017
very nice!!! and it works nice and smooth!!! thank you
Satisfied Customer
September 30, 2018
Prompt service and I am very appreciative of the resourceful how-to videos.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Lexus Scion Starter DIY Solutions ECS00157-1AEST00376 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.