1ASFK00291-Toyota Lexus Scion Front Outer 2 Piece Tie Rod Set

Replaces

Toyota Lexus Scion Front Outer 2 Piece Tie Rod Set DIY Solutions

1ASFK00291

Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Moog ES3306
  • OE # 4504629255
  • OE # 4504629255 x2
  • DIY Solutions SUS00791
FREE SAME DAY SHIPPING
Part 1ASFK00291
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS00791

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (3:45)
    • Turn the wheel by hand to check for play in the tie rod
    • Check for a gap in movement between the tie rod and spindle
    • Listen for a clunking sound from the tie rod
    • Measure the distance from the steering rack bellow to the lock nut
    • Record this measurement
    • Alternatively, mark the inner tie rod threads against the lock nut with a marker
    • Straighten out the cotter pin with needle nose pliers
    • Pull the cotter pin out of the castle nut
    • Loosen the castle nut from the tie rod with a 17mm socket and ratchet
    • Apply penetrating oil to the lock nut
    • Loosen the lock nut with a 22mm wrench
    • Tap the tie rod loose from the spindle with a hammer
    • Remove the castle nut
    • Tap the tie rod out of the spindle
    • Hold the inner tie rod with a 14mm wrench if necessary
    • Twist the outer tie rod off the inner tie rod with a 19mm wrench
    • Twist off the lock nut by hand
  3. step : Installing the Outer Tie Rod (8:07)
    • If you marked the inner tie rod, spin the lock nut to match the paint line
    • If you took a measurement, spin the lock nut to the correct distance from the steering bellow
    • Spin the outer tie rod onto the inner tie rod until it reaches the lock nut
    • Push the tie rod stud into the wheel spindle
    • Torque the tie rod nut to 36 foot-pounds
    • Install the new cotter pin with the longer leg facing down
    • Bend the cotter pin under the nut with pliers
    • Turn the inner tie rod with a 14mm wrench if it needs to be adjusted
    • Hold the inner tie rod with a 14mm wrench
    • Tighten the lock nut with a 22mm wrench
  4. step : Reattaching the Wheel (11:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 14mm Wrench
  • 19mm Wrench


Fits the following Makes:

Year Make Model Description
1992-2000Lexus ES300 Lexus ES300 Front Outer 2 Piece Tie Rod Set
2001Lexus ES300 Lexus ES300 (Built Before 7/01 Production Date) Front Outer 2 Piece Tie Rod Set
1999-2003Lexus RX300 Lexus RX300 Front Outer 2 Piece Tie Rod Set
2008-2014Scion xD Scion xD Front Outer 2 Piece Tie Rod Set
1995-2004Toyota Avalon Toyota Avalon Front Outer 2 Piece Tie Rod Set
1992-2000Toyota Camry Toyota Camry Front Outer 2 Piece Tie Rod Set
2001Toyota Camry Toyota Camry (Built Before 7/01 Production Date) Front Outer 2 Piece Tie Rod Set
1998-2002Toyota Sienna Toyota Sienna Front Outer 2 Piece Tie Rod Set
2003Toyota Sienna Toyota Sienna (Built Before 1/03 Production Date) Front Outer 2 Piece Tie Rod Set
1999-2003Toyota Solara Toyota Solara Front Outer 2 Piece Tie Rod Set
2012-2016Toyota Yaris Toyota Yaris SE Front Outer 2 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS00791
DIY Solutions SUS07402
MOOG ES3306
MOOG Chassis Products ES3306

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: SUS00791
Product Reviews
4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Worked fine.
Not sure if it was an issue with this product or not, but I had trouble twisting one of them on. Otherwise, it’s been great so far
April 28, 2018
tie rod ends
Its been three weeks since I installed my tie rod ends and my car handles beautifully. Excellent video on how to install. Its as easy as it looks. I am very happy with 1A Auto.
July 12, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
This tierod end a factory sealed or has grease fittings?
Ryan G March 16, 2017
These tie rod ends are sealed units, pre-packed with grease, no zerks.
Tim K March 17, 2017
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Lexus Scion Front Outer 2 Piece Tie Rod Set DIY Solutions-1ASFK00291 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.