1ABFS02530-Toyota Lexus Rear Ceramic Brake Pad & Rotor Kit

Replaces

Toyota Lexus Rear Ceramic Brake Pad & Rotor Kit

1ABFS02530

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Venting Type: Vented
  • Rear Brake Rotor Diameter: 12.28 in. (312mm)
  • Wheel Lug Count: 6 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number AXCD606
  • OE # 4243160201
  • OE # 424316
  • OE # 4243160270
FREE SAME DAY SHIPPING
Save 30%
List: $116.95 Save: $35.00
Part 1ABFS02530
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11695

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   6 Lug
  • Rear Brake Rotor Venting Type:   Vented
  • Brake Pad Friction Material:   Ceramic
  • Rear Brake Rotor Diameter:   12.28 in. (312mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:23)
    • Loosen the 21 mm lug nuts with the vehicle on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brakes (1:29)
    • Loosen the brake bleeder screw and attach a drain hose or place a drain pan underneath
    • Pinch off the brake hose
    • Pry between the outer brake pad and caliper to compress the caliper piston
    • Close the bleeder screw
    • Remove the two 17 mm caliper slider bolts
    • Remove the caliper and place it in a supported position
    • Remove the brake pads
    • Remove the two 17 mm brake caliper bracket bolts
    • Remove the brake caliper bracket
    • Remove the brake rotor
  3. step : Installing the Brakes (11:08)
    • Clean the axle hub if it it excessively rusty to ensure good fitment of the new rotor
    • Clean the backing plate if it is excessively rusty to keep debris out of the rotor
    • Wipe the braking surfaces of the rotor clean with brake parts cleaner
    • Install the rotor and check for emergency brake shoe contact, adjust as necessary
    • Remove and replace the brake slider boots as necessary
    • Clean the caliper slider bore as necessary
    • Remove and clean the brake pad tins
    • Clean the brake pad tin grooves in the caliper
    • Apply brake grease in the caliper grooves
    • Reinstall the brake pad tins
    • Mount the caliper bracket with the two 17 mm bolts
    • Torque the caliper bracket bolts to 78 ft-lb
    • Apply brake grease to the caliper piston and ears. Grease only surfaces that will contact the pads.
    • Install the brake pads into the caliper bracket
    • Slide the caliper over the brake pads and line up the slider holes
    • Apply brake grease to the two 17 mm caliper slider bolts
    • Install the two 17 mm caliper slider bolts
    • Torque the 17 mm caliper slider bolts to 65 ft-lb
    • Open the bleeder screw and allow the fluid to gravity bleed until there is a steady stream
    • Close the bleeder screw
    • Perform a full brake bleed if necessary
  4. step : Installing the Wheel (34:08)
    • Slide the wheel onto the lugs
    • Install the 21 mm lug nuts by hand
    • Lower the vehicle with minimal weight on the wheel
    • Tighten the lug nuts in a crossing pattern
    • Torque the lug nuts to 85 ft-lb in a crossing pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Hose Pinch-Off Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2003-2009Lexus GX470 Lexus GX470 Rear Ceramic Brake Pad & Rotor Kit
2003-2009Toyota 4Runner Toyota 4Runner Rear Ceramic Brake Pad & Rotor Kit
2007-2009Toyota FJ Cruiser Toyota FJ Cruiser Rear Ceramic Brake Pad & Rotor Kit
2001-2007Toyota Sequoia Toyota Sequoia Rear Ceramic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31294
Bendix PRT5330
DuraGo BR31294
Raybestos MGD606CH
Raybestos EHT606H
Raybestos Brakes EHT606H
Raybestos Brakes MGD606CH
Raybestos Brakes 96929
Wagner BD126038

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11695
Product Reviews
3.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
1
Excellent at a low cost
The rotors are exactly like OEM. Perfect fit, excellent quality, easy to install, and all much less costly that the local parts store. I would buy again and highly recommend.
April 22, 2017
Great product
The brake kits Fit my 2001 Toyota Sequoia perfectly and have been problem free so far
May 6, 2020
When the ceramic pads heat up it sounds like rocks are stuck in them. The pads are cheap or the rotors are cheap Im not sure. Either way I had them installed by a shop and there isnt anything wrong with the install. Go with oem over these 100% spend the extra money and go oem. I thought the stuff from this site was good untill I put it on my car and now its falling apart 4 months later.
May 25, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Lexus Rear Ceramic Brake Pad & Rotor Kit-1ABFS02530 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.