1ASFK02060-Toyota Lexus Front Inner & Outer 4 Piece Tie Rod Set


Toyota Lexus Front Inner & Outer 4 Piece Tie Rod Set DIY Solutions


Part Details

  • Set Quantity: 4 Piece

This part replaces:

  • Moog EV301
  • Moog ES3306
  • OE # 4550339135
  • OE # 4550329355
  • OE # 45503-39135
  • OE # 45046-29255
  • OE # 45503-29355
  • OE # 4504629255
  • DIY Solutions SUS02000
Save 2%
List: $56.95 Save: $1.00
Part 1ASFK02060
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS02000

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   4 Piece

These Tie Rod Ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.


  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT INNER & OUTER
  • Direct replacements
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (3:45)
    • Turn the wheel by hand to check for play in the tie rod
    • Check for a gap in movement between the tie rod and spindle
    • Listen for a clunking sound from the tie rod
    • Measure the distance from the steering rack bellow to the lock nut
    • Record this measurement
    • Alternatively, mark the inner tie rod threads against the lock nut with a marker
    • Straighten out the cotter pin with needle nose pliers
    • Pull the cotter pin out of the castle nut
    • Loosen the castle nut from the tie rod with a 17mm socket and ratchet
    • Apply penetrating oil to the lock nut
    • Loosen the lock nut with a 22mm wrench
    • Tap the tie rod loose from the spindle with a hammer
    • Remove the castle nut
    • Tap the tie rod out of the spindle
    • Hold the inner tie rod with a 14mm wrench if necessary
    • Twist the outer tie rod off the inner tie rod with a 19mm wrench
    • Twist off the lock nut by hand
  3. step : Installing the Outer Tie Rod (8:07)
    • If you marked the inner tie rod, spin the lock nut to match the paint line
    • If you took a measurement, spin the lock nut to the correct distance from the steering bellow
    • Spin the outer tie rod onto the inner tie rod until it reaches the lock nut
    • Push the tie rod stud into the wheel spindle
    • Torque the tie rod nut to 36 foot-pounds
    • Install the new cotter pin with the longer leg facing down
    • Bend the cotter pin under the nut with pliers
    • Turn the inner tie rod with a 14mm wrench if it needs to be adjusted
    • Hold the inner tie rod with a 14mm wrench
    • Tighten the lock nut with a 22mm wrench
  4. step : Reattaching the Wheel (11:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 14mm Wrench
  • 19mm Wrench

Fits the following Makes:

Year Make Model Description
1992-2000Lexus ES300 Lexus ES300 Front Inner & Outer 4 Piece Tie Rod Set
2001Lexus ES300 Lexus ES300 (Built Before 7/01 Production Date) Front Inner & Outer 4 Piece Tie Rod Set
1995-2004Toyota Avalon Toyota Avalon Front Inner & Outer 4 Piece Tie Rod Set
1992-2000Toyota Camry Toyota Camry Front Inner & Outer 4 Piece Tie Rod Set
2001Toyota Camry Toyota Camry (Built Before 7/01 Production Date) Front Inner & Outer 4 Piece Tie Rod Set
1998-2002Toyota Sienna Toyota Sienna Front Inner & Outer 4 Piece Tie Rod Set
2003Toyota Sienna Toyota Sienna (Built Before 1/03 Production Date) Front Inner & Outer 4 Piece Tie Rod Set
1999-2003Toyota Solara Toyota Solara Front Inner & Outer 4 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS02000
DIY Solutions SUS07382
DIY Solutions SUS07402
MOOG Chassis Products EV301
MOOG Chassis Products ES3306

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: SUS02000
Product Reviews
5.00/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
On time and perfect fit
Ordering was easy, my parts arrived one day earlier than I expected. The parts fit perfect and my 98 sienna drives like new again.
February 6, 2018
Make lemonade
An asshole that knows the cops in my town hits my parked car on a 3o foot wide double lined straight road in Denville New Jersey. I am parked in the wrong direction because I am helping a friend with a battery Jump. This A hole hits my parked car (off and locked) and puts it onto the sidewalk. His insurance company says I am at fault because it was parked the wrong way. The A hole that hits my parked locked (not running) car does not get a ticket for careless driving but I get a parking ticket. So the whole thing is my fault. These guys helped me get my car running again and at a great price. Use them, They helped me make lemonade our of a lemon situation.
February 11, 2018
Excellent product
Could have not asked for a better product, fit, price, shipment, these guys have it all. This was my first purchase, always trust the how to videos on Youtube, now Ill be a loyal customer. Good job guys!
May 31, 2018
good quality parts NO BS!!
i do alot with my dirt bikes and cars using online purchases, and u guys rock!! thank u
December 4, 2018
Excellent products
Excellent productsAnd customer serviceWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
January 6, 2019
Tie rods
So far, so good..
March 4, 2019
They fit
They fit and are a little thicker than the oem, they come with the lock washer
April 24, 2019
Excellent quality and price tie rods!
Bought these inner/outer tie rods for my 99 camry. Parts are identical to the oem ones. Perfect fit and excellent quality. I will continue using 1AAuto for my next camry parts.
October 19, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will the outer piece require a grease fill?
William C December 17, 2015
Yes the grease fitting will come with the outer ie rod.
Wesley C October 15, 2016
If it does come with a fittings
M A April 5, 2020
Yes it comes with fitting.
L M April 16, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Lexus Front Inner & Outer 4 Piece Tie Rod Set DIY Solutions-1ASFK02060 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.