1AACS00064-Toyota Lexus Front Driver & Passenger Side 2 Piece CV Axle Shaft Set

Replaces

Toyota Lexus Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82458

1AACS00064

Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • A1 Cardone 66-5235
  • OE # 4343060082
  • OE # 4343004070
  • Hollander 447-51436
  • OE # 4343060081
  • Hollander 447-61646
FREE SAME DAY SHIPPING
Save 18%
List: $219.95 Save: $40.00
Part 1AACS00064
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: CSA82458

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Set Quantity:   2 Piece

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:23)
    • Raise the vehicle with minimal weight on the wheel
    • Loosen the six 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the six lug nuts
    • Remove the wheel
  2. step : Removing the Brakes (0:47)
    • Pry against the brake pads to compress the brake pistons slightly
    • Remove the brake line retaining clip
    • Remove the 12 mm bolt to remove the brake line retaining bracket
    • Remove the tie rod cotter pin
    • Remove the 19 mm tie rod castle nut
    • Hammer on the knuckle to loosen the tie rod and remove it
    • Remove the two 17 mm caliper bolts
    • Remove the brake caliper and hang or support it
    • Remove the brake rotor
  3. step : Removing the Axle (4:12)
    • Remove the axle hub cap
    • Remove the axle cotter pin
    • Remove the axle nut retaining cap
    • Remove the 36 mm axle nut
    • Disconnect the ABS wire electrical connector
    • Pry the ABS wire retaining clip on the wheel knuckle and remove the wire
    • Remove the 18 mm nut to remove the sway bar link from the knuckle
    • Remove the upper control arm cotter pin
    • Remove the 19 mm upper control arm axle nut
    • Remove the upper control arm from the knuckle
    • Remove the two 19 mm lower ball joint bolts
    • Remove the knuckle
    • Tie off the axle around the strut to prevent it from falling
    • Hammer or pry the axle out of the front differential
    • Untie and remove the axle
  4. step : Installing the Axle (17:39)
    • Insert the axle into the differential
    • Tap the axle in to seat it fully
    • Install the knuckle onto the axle and align it with the lower ball joint bracket
    • Install the two 19 mm lower ball joint bracket bolts
    • Install the sway bar link into the knuckle
    • Install the upper control arm into the knuckle
    • Install the 19 mm upper control arm castle nut
    • Install the 18 mm sway bar link nut
    • Torque the 19 mm upper control arm castle nut to 81 ft-lb, and continue tightening if necessary to align the nut with the cotter pin hole
    • Install the upper control arm cotter pin
    • Install the axle nut
    • Torque the axle nut to 173 ft-lb
    • Install the axle nut retaining cap
    • Install the axle cotter pin
    • Apply gasket maker to the axle hub cap
    • Install the axle hub cap
    • Reconnect the ABS wire electrical connector and reseat the wire in the retaining clips
  5. step : Installing the Brakes (24:32)
    • Install the brake rotor onto the wheel studs
    • Temporarily install a lug nut to hold the rotor in place
    • Apply brake grease to the pad surfaces of the brake caliper, and the rims of the pistons
    • Install the brake caliper
    • Install the two 17 mm brake caliper bolts
    • Torque the 17 mm caliper bolts to 91 ft-lb
    • Reinstall the brake line retaining bracket
    • Reinstall the 12 mm brake line retaining bracket bolt
    • Reinstall the brake line retaining clip
    • Remove the temporarily installed lug nut
    • Reinstall the tie rod into the wheel knuckle
    • Install the 19 mm tie rod castle nut
    • Torque the 19 mm castle nut to 67 ft-lb, continue tightening to align the castle nut with the cotter pin hole if necessary
    • Insert and peen the cotter pin
    • Press the brake pedal to seat the brake pads
  6. step : Checking the Differential Fluid Level (31:57)
    • Remove the 10 mm hex differential fill plug
    • Insert your finger or a pick into the fill hole to check the fluid level
    • The fluid level should be just below the rim of the fill hole
    • Top off the fluid with 80W-90 gear oil if necessary
    • Reinstall the 10 mm hex fill plug
  7. step : Installing the Wheel (32:28)
    • Install the wheel onto the wheel studs
    • Install the six lug nuts and tighten them by hand in a crossing pattern
    • Lower the vehicle with minimal weight on the wheel
    • Torque the 21 mm lug nuts to 85 ft-lb in a crossing pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • RTV

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Pocket Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 21mm Socket
  • 36mm Socket

  • Specialty Tools

  • Brake Caliper Hanger

  • Wrenches - Metric

  • 24mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
So this is new Toyota product and not reman?
Geff L August 20, 2016
To be honest it looks new. No signs of refurbishment.
Tim F August 20, 2016
thought they were new aftermarket. Now have over 20,000 miles on them, no issues.
Greg D August 21, 2016
yes it is a new product
Ronald H August 21, 2016
New, not rebuilt. Not OEM Toyota. That would set you back a couple hundred dollars.
Brian F August 23, 2016
They all appeared all new parts to me! I installed them on my 2003 4Runner SR5.
Robert W August 24, 2016
where are these cv axles made?
Le M April 5, 2017
China
Cathy B April 5, 2017
I am not certain, I think China. They are working just fine so far. Montana winters are hard on CV boots too.
Michael M April 5, 2017
Will this fit my 2009 Es 350 Lexus?
Bethzaida P April 29, 2018
These do not fit your vehicle. We only carry the driver side CV axle for a 2009 ES350. Here is a link to the part if you would like to purchase it: https://www.1aauto.com/cv-axle-shaft/i/1aacv00370?f=1159905&y=2009
Tim K April 29, 2018
Will it fit 06 Tacoma 4x4?
Peter V January 13, 2019
Yes, according to the information you provided, this part will fit your vehicle.
Jessica D January 14, 2019
Will this work on a 4x4 07 4runner? if so what is the difference between this and the 4 piece set
Hayden K July 10, 2020
Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
Emma F July 10, 2020
Who is the manufacturer for these axles ? Is it Cardone ?
Steve D September 9, 2020
Thank you for your inquiry. These are manufactured by TRQ. TRQ is a high quality, high-end name brand that we offer and back with our 1A Auto Limited Lifetime Warranty. Please let us know if you have any further questions.
Tim K September 9, 2020

Fits the following Makes:

Year Make Model Description
2010-2018Lexus GX460 Lexus GX460 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2003-2009Lexus GX470 Lexus GX470 Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2003-2018Toyota 4Runner Toyota 4Runner Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2007-2014Toyota FJ Cruiser Toyota FJ Cruiser Front Driver & Passenger Side 2 Piece CV Axle Shaft Set
2005-2018Toyota Tacoma Toyota Tacoma Front Driver & Passenger Side 2 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-5235
Cardone Select 66-5235
GSP NCV69170
Lexus 4343060060
Toyota 4343004070
Toyota 4343060060
Toyota OEM 4343004070
Toyota OEM 4343060060

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: CSA82458
Product Reviews
4.88/ 5.0
16 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
15
0
1
0
0
Installed new axles
Well got the axles in on my 2007 FJ Cruiser all seems well very smooth ride with no vibrations good job on these babies Todd H
February 2, 2017
easy in
everything was as desired. .................................................................................................
July 27, 2017
2006 Toyota 4Runner V8 Limited - Axle Shaft Front Pair
I was really on the fence about purchasing this Axle Shaft, since the detail on the vehicle fitting was not specific on the make and model for my 2006 Toyota 4Runner V8 Limited. I purchased it anyways on past experience with other parts ordered for my vehicle from 1A Auto. Found it to be an exact OEM fit. Cant say on the durability, since its only been on for less then a 100 miles, but so no noticeable issues. What more can you ask for. Great company at an affordable price.
September 5, 2017
Perfect match
Parts were a perfect match for the OEM axles I needed to replace. Parts were well packed and arrived in great shape. I am pretty confident they will give great service, hopefully as good as the originals, which went over 200,000 miles and were still good other than the boots.
June 19, 2018
So far so good!
Bought these for my 2005 4x4 Toy 4 Runner. Removed both front oem axles and replaced with these. Exact same dimensions and fit. Plus, lifetime warranty. Replacement axles even have same indents as oem axles for easy prying/tapping out and tapping in—a big plus when installing. Materials seem solid. Boots, which seem good, are always the weak spot on cv axles. Would buy again. Ordering was easy, and delivery time was super fast. Axles were packed in individual boxes complete with foam supports and plastic wrapping to prevent any damage to joints or dust seals. One installation tip: seat each new axle by hand when installing the inner joint into the front differential (you can sort of feel the new splines engaging the differential if you rotate the new spline a bit)...then use a HEAVY hammer and a long blunt chisel to TAP TAP TAP (not Hammer!) the new axle into the front diff. ( Don’t be shy—getting them in takes a bit of force.). Use the built-in indents on the body of the new cv joint housing to provide the “grab� for the chisel. Go slow and tap on all sides of the joint housing for an even insertion. Stop tapping when the new housing is in as far as was the original housing. The indents also come in handy when removing the original cv housing from the diff, especially on the driver’s side. Try hard to not damage any seals when replacing. Good luck!
September 10, 2018
Cv axle
Fit perfect, vehicle runs smooth now, have purchased from before & definitely will again.
November 4, 2018
CV Axles for 2006 4Runner
Got the package and they were super well kept. The boxes were loaded with styrofoam braces and bubble wrap everywhere so they wouldn’t shift too much and get damaged during handling. Put them in and they fit really well. Only had to put a little bit of grease on the end to fit them in. Haven’t had them for too long, so I couldn’t say how durable they are, but I’m very satisfied so far.
November 20, 2018
Quick delivery, great product!
Ordered cv axle shafts for my Toyota 4Runner, they showed up on time, the products were a perfect fit, quality seems great, would recommend 1A auto parts to my friends.
January 6, 2019
CV axle replacement.
Quality made parts at prices you can’t beat. Customer service beats others. Parts ships real fast. Will order from 1A Auto again
January 10, 2019
Cv axles shafts
After 196,000 miles, passenger side CV Axle shaft needed fixing... Decided to replace both front axles as a set... 1A parts were a perfect fit. Very happy with my purchase.
March 18, 2019
Good parts
Exactly what you expect for a solid price
June 13, 2019
Fit my Tacoma perfectly
This axle fit my 2010 Toyota Tacoma perfectly just like an OEM part. It’s only been on a couple of weeks and it’s holding strong, based on the quality and how well it fit, I’m sure I won’t run into any issues with it. It’s nice to be able to buy a reliable part for a fraction of the cost.
September 15, 2019
Seems like a quality part, but someone forgot a step while manufacturing one of the CV Axles I purchased.
These CV axles look to be as good, if not better than OE. Installation was easy, and the part fit perfectly. One issue I experienced is that one of the two axles I received was assembled incorrectly, or missing a critical step. The technician forgot to release the vacuum inside one of the cv boots, and this caused it to be under extreme vacuum. If I wouldnt have noticed it, you can be sure it would have torn very prematurely! I knew how to fix the issue, so everything is fine as of now. Cant give 5 stars like I wanted to because of the sloppy assembly work!
November 27, 2019
Looks just like the OEM part
I replaced both axles in my fj cruiser with parts I got from 1a auto. The parts arrived nicely packaged. The axles were very clean and a breeze to install.
January 23, 2020
CV axle shaft pair
Not much to say, fits as original, reasonable price and no core! Quick shipping too!
August 7, 2020
seems to be a good part. fit well and is working. Keeping an eye on one side due to seeing some grease on the boot. hope it not leaking. will update
August 9, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Lexus Front Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82458-1AACS00064 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.