1ASHS00951-Toyota Lexus Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set



2007 Toyota FJ Cruiser 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set

Guaranteed to fit 2007 Toyota FJ Cruiser

03-11 Toyota 4Runner 07-11 FJ Cruiser 03-09 Lexus GX470 4WD Front Hub Assembly Pair
$ 169.95
11% OFF
11% OFF
In Stock
Part 1ASHS00951

Orders must be placed by 2pm ET
Part 1ASHS00951
In Stock
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together


Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Bearing Type:   Tapered Roller Bearing
  • Quantity:   2 Piece

What are Tapered Bearings and Why Use Them?  Tapered bearings use rollers shaped like flat-topped cones and two races angled from the outside in of the bearing.  This angle makes the bearing better at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars.  Your model came from the factory with tapered bearings. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing increases wear and failure.

Precision Engineered
  • From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
  • 100% Factory tested to precise OEM tolerances.
Highest Quality Materials
  • High quality, multi-lip seal reduces intrusion of dirt and water.
  • Heavy duty grease resists high temperature, moisture, and reduces intense friction.
Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

BHA54130 Axle / Spindle Nut Torque Specification

How to Replace Wheel Hub Bearing Assembly 03-09 Toyota 4Runner

Created on: 2019-10-16

Watch this video to learn how you can replace the wheel bearing assembly on your 03-09 Toyota 4Runner! 1A Auto shows you how to do it yourself!

  1. step 1 : Removing the Wheel
    • Loosen the 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
  2. step 2 : Removing the Brakes
    • Remove the brake flex hose retaining clip
    • Remove the caliper slider pin retaining clips
    • Remove the caliper slider pins
    • Remove the brake pad spreader spring
    • Pry the brake pads toward the caliper pistons to depress them slightly
    • Remove the brake pads
    • Remove the two 17 mm caliper bolts
    • Remove the caliper and hang it to keep tension off the flex hose
    • Remove the brake rotor
    • Clean the wheel hub surface
  3. step 3 : Removing the Wheel Hub Assembly
    • Remove the wheel hub cover using a hammer and punch
    • Remove the axle cotter pin and nut retainer
    • Remove the 36 mm axle nut
    • Drive the axle inward using a hammer and punch
    • Loosen the four 17 mm hub assembly bolts
    • Loosen the hub assembly from the wheel knuckle with a hammer, if necessary
    • Remove the wheel hub assembly
  4. step 4 : Installing the Wheel Hub Assembly
    • Clean rust and debris from the wheel hub mounting surface on the wheel knuckle
    • Align the backing plate and install the hub into poistion
    • Tighten the four 17 mm hub assembly bolts
    • Tighten and torque the 36 mm axle nut to 203 ft-lb
    • Install the axle nut retainer and cotter pin
    • Apply gasket maker to the outer rim of the hub cover
    • Drive the hub cover into position with a mallet
  5. step 5 : Installing the Brakes
    • Clean the brake rotor
    • Apply anti seize grease to the wheel hub
    • Install the brake rotor onto the wheel studs
    • Clean rust and debris from the brake caliper as necessary
    • Apply caliper grease to the pad contact surfaces of the brake caliper
    • Lower the brake caliper onto the knuckle and secure it with the 17 mm bolts
    • Torque the 17 mm caliper bolts to 91 ft-lb
    • Reposition the brake flex hose in the retaining bracket and secure it with the retaining clip
    • Insert the brake pads into the caliper
    • Install the lower brake pad slider pin
    • Install the upper brake pad slider pin while threading it through the pad spreader spring
    • Secure the slider pins with the retaining clips
    • Insert the pad spreader ends into the pads
  6. step 6 : Installing the Wheel
    • Install the wheel onto the wheel studs
    • Install the six 21 mm lug nuts and tighten them by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the six 21 mm lug nuts to 83 ft-lb
    • Lower the vehicle completely

Tools needed for replacement

  • General Tools

    Jack Stands

    Rubber Mallet

    Large Hammer

    Center Punch

    Floor Jack

  • Materials, Fluids, and Supplies

    Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

    Side Cutters

  • Ratchets & Related

    Socket Extensions

    Torque Wrench


  • Screwdrivers & Related

    Pry Bar

    Pocket Screwdriver

    Flat Blade Screwdriver

  • Sockets - Metric

    17mm Socket

    21mm Socket

    36mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2010-2016Lexus GX460 Lexus GX460 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2003-2009Lexus GX470 Lexus GX470 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2003-2016Toyota 4Runner Toyota 4Runner 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2007-2014Toyota FJ Cruiser Toyota FJ Cruiser 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
2005-2014Toyota Tacoma Toyota Tacoma 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
In Stock
Part 1ASHS00951
Product Reviews
Loading reviews
4.81/ 5.0 113
Price was right but get what pay for I guess
June 16, 2017
Price was good but I have a whomp whomp whomp sound now when I turn to the left. Get what you pay for I guess.
As described
October 26, 2017
The pair are as described. Arrived on time and seem to be of good quality. I only have ~200 miles on them since installing and they work well so far. I will update if there are any issues down the road.
Fantastic Value!
November 16, 2017
You get just one of these at the local parts store for more than the price of the pair! The part came in very fast and so far so good! I will be coming back for my big parts purchases!
So far so good
December 12, 2017
Quality seems to be very good. Also you get 2 here for the price of one with an awesome warranty. Installed these myself. Actually easier than I thought and saved myself well over $1000. I drive my truck (2010 Toyota Tacoma 4x4 trd) kind of hard so we'll see if they hold up.
correct parts the first time
December 31, 2017
this was the easiest parts purchase i have ever made wheel bearings were half the cost of parts store and they were great and came in 2 days we will be buying all our parts from 1A
Perfect fit! Perfect condition!
January 24, 2018
Couldn’t be happier! Saved the time and cost of a machine shop to press out and in new bearings, and they came in well packaged, a very timely manner, perfect condition and was a perfect fit! Awesome product and awesome service! Thank you!!!!!
Easy to install
February 11, 2018
Took me about two hrs to install both wheel bearing hun assemblies for my 07 tacoma truck is like new now great parts half the price
Toyota bearings
March 11, 2018
Very pleased with product. Perfect stock replacement. Good quality
March 13, 2018
Very good fit. Half the price of other places i looked..
looks good
March 15, 2018
won't be installing until the weather warms up,i will let you know later.
Fit my 2011 Tacoma perfect
March 21, 2018
I just bought these to replace the front bearings on my 2011 Tacoma 4.0 and they fit perfect. As far a longevity only time will tell...
April 14, 2018
Fit perfect and fast delivery was as advertised on the web
Fast Shipping, seems like decent quality
April 25, 2018
I couldn't justify spending nearly $200 on one wheel bearing assembly so I bought this pair. I only needed to replace one, after 1k miles on this replacement it seems like it will hold up. Installation was straight forward and took under 2 hours taking my time. I will be using the 2nd one to replace my driver side in the coming weeks. I have a 2009 tacoma DCSB 4x4 with 100k miles on the odometer. Save yourself $500+ and do the job yourself, it is as easy as taking out 13 bolts (including lug nuts) and torquing them to spec. Once you install it, check the rotor shroud so it is not hitting on your brake rotor.
Great deal
May 17, 2018
Saved a ton by buying from 1a auto. Profuct seems to fit and work well.
Great parts
June 19, 2018
Great replacements for my Tacoma. Really surprised by the apparent quality given the low price. UPS didn't do me any favors, apparently sending my shipment just about everywhere in the state before making their way to my house. Finally showed up a week after they were supposed to.
Outstanding product and service
July 4, 2018
I was very impressed by the quality of the bearings. The video that reviewed the bearings themselves told how they were constructed. Very helpful
Wheel Hub Assembly 09 Tacoma
July 28, 2018
I ordered and installed 1A front wheel hub assemblies in my 09 Tacoma 4wd. Great experience from ordering to installation. The parts seem to be of good quality but as with anything only time will tell. I relied on their instructional youtube video to aid in teplacing these parts and with some variation everything went according to plan. The price was great. They arrived on my doorstep within a few days and when I called customer service to ask A question they were great. Would highly recommend 1A parts and definitely will buy from them in the future.
August 8, 2018
Was a awesome sc parts looked the way it should be new looks better then OEM Will buy again
4-wheel drive hubs
August 23, 2018
Exact replacement for a reasonable price. Assembly went like it was supposed to, no problems.
Incredibly quick delivery
August 24, 2018
I ordered a wheel bearing kit for my tacoma one afternoon and had the wheel bearings late the next afternoon. Couldn't believe it. And the cost was $620 less than what the dealership wanted. Very happy to have learned about 1A Auto.
Best prices ever !
September 1, 2018
I am so impressed with the quality of the parts I have bought from A1 , normally I buy from the big three but was flabbergasted over the prices for complete hubs for my Toyota Tacoma, I had to find a better price and I did right here at A1. I got both sides for less than the cost of one. Can’t be these prices anywhere. Thank you A1 I’ll be seeing you soon. Rob m Massachusetts.
Fast and Precise
September 20, 2018
My order came faster than had been anticipated and was the correct part. I ordered through the phone and the representative helped me with every question asked. The part came brand new in pristine packaging and was installed the same day I got it. This bearing & assembly pair works flawlessly.
Very High Quality and Fast Shipping
October 3, 2018
Shipping was quick and they came to my door in just a couple days. Bearing and Hub assembly appeared of high quality and fitment was perfect. I have 2 of these on the front of my 4runner. Lets see how they last.
wheel bearings
October 9, 2018
Received as ordered,thank you. Haven't installed as of now,in the coming days
Great product for a great price
October 19, 2018
I purchased these hubs to replace the worn hubs on my wife's 03 4runner. We have gone about 1500 miles at this point and we have zero issues. I recently installed a lift kit and inspected the hubs for play, and they were solid. I have 12 years of vehicle maintenance background and I would recommend this product if you need to replace your hubs. I will definitely order this brand and from this site again.
Perfect fit
October 30, 2018
Exactly the parts I was looking for and shipped really, really fast. I love the hub / bearing assembly, it simplifies the job so much. It was a perfect fit for a 2007 Toyota 4Runner SR5. I'll definitely look at 1A Auto in the future for other parts.
Quality parts, great service, great prices
October 30, 2018
I received the correct parts, they came quickly, and they work great. I love getting quality parts for a reasonable price and it is all backed by excellent customer service. Big Thanks
1ASHS00951-Wheel Bearing & Hub Assembly Pair
November 1, 2018
Awesome transaction. Website easy to use, product arrived quickly and in perfect condition. Installed the wheel bearings and the old Toyota is like new again! Thank you.
Great product, easy install!
November 5, 2018
Quoted $2500 to replace the front two on my 4runner by the dealership. Bought these online instead and installed both of them myself in about 4-5 hours total. Very easy and simple install, beats the dealership by FAR! Reliable products and seem heavy duty enough to last a long time, but only time will tell! I believe they will last well.
Quality Product for A Great Price
November 9, 2018
I needed to replace the front wheel bearings on my 2011 Tacoma. After some research I found the 1A Auto site to compare their prices to other sites. Not only was the price great, the warranty was the best by far. Granted the bearings only have about two weeks on them, so far so good. The ordering process was very easy and the order was delivered as promised.
Perfect match
November 12, 2018
I ordered the part and it came in three days to my front door. Perfect easy fit with no pressing required. Thanks again A1! It's always painless with you ??
2010 tacoma wheel bearing
November 12, 2018
I recently purchased a pair of wheel bearing that fit and worked perfectly!!
Awesome service to the middle of the Pacific ocean
November 16, 2018
I ordered parts on Sunday and they arrived Friday. I also confirmed my order and received outstanding customer service. I am most happy with 1AAuto. Mahalo
Prompt delivery and works great
November 19, 2018
Glad to be able to buy the whole assembly. Works great so far. Would definitely recommend 1aauto
Trq bearings front and rear for 4runner
November 21, 2018
The front and rear bearings for my 03 4Runner arrived very fast.they were nicely packaged. Fronts were easy bolt on asi got hub and bearing pre-pressed. The back had to get pressed by machine shop. So far very happy.
Toyota 4-runner hubs
November 24, 2018
I bought and installed your front hub and bearing kit. They are quality parts for a great price! Also they showed up faster than original shipping estimate. I will definitely buy from 1Aauto again!
November 29, 2018
These are a perfect OEM replacement. Easy install and great price!
Best service on time but shipping was way to expansive for Canadain residents
December 14, 2018
Best service best parts but way expensive on shipping to Canadian residents.
Wheel Bearing & Hub Assembly Pair
January 2, 2019
Received shipment fast,,installation was less than 2 hrs,,appears to be quality parts,,,after 200 miles, so far, so good!!
Hub and wheel bearing install
January 9, 2019
By far the best and easiest way to fix a bad wheel bearing, parts fit like a glove , and next day delivery , i would recommend these guys to everyone i know , and to boot , Price was the best i could find
February 10, 2019
These hubs fit perfectly, quality made. Will buy from 1A all the time.
Fast shipping, seems like high quality.
February 11, 2019
I was a little hesitant to get these because they're so cheap I was almost suspicious. OEM would be double or possibly even Triple the price. I guess time will tell but I'm having no issues weeks down the road.
Tacoma front wheel bearings
February 20, 2019
The wheel bearings are top notch and very easy to install it took only 1 hour to install both sides I ordered them and they were here in two days they made a great difference in the noise from the front I recommend 1A auto to all my friends
Made easy
February 26, 2019
Replaced front wheel bearing hub assembly on 07 Tacoma. Bolt off, bolt on. Very easy project. Dust cover was a little tight to get back on new assembly, but other then that, was good.ai
Great service
February 26, 2019
Best parts and best price
Bearing and hub happy
March 1, 2019
Yes,i was very pleased with this product,it was high quality and very easy to put on once i removed the old hub .i guess time will tell whether they last as long as the factory ones..i will recommend your company and products to everyone i know,thank you.
Tacoma Hub and Wheel Bearing Assembly
March 10, 2019
Thank you for my recent purchase of the hub assembly L/R. I am pleased with overall quickness of the delivery of these parts and they fit perfectly.
Wheel bearings
March 18, 2019
My shipment did not arrive on time! It was a day late! I had to rearrange my schedule without a car. The product was a good fit and went together with no issues. I would recommend that you ask your supplier to also provide the outer o'ring seal between the wheel bearing assembly and the hub.
Wheel bearing
March 18, 2019
After 196,000 miles, the passenger side bearing had play in it... Decided to replace both.
Good quality Great Price
April 27, 2019
Good quality Great price on these hub/bearings combo. Arrived within 3days of order. Installed both fronts in about an hour. Don’t waste your time pulling and repressing bearings. These come pre-pressed. Took that horrible humming noise out of the front end from the old blown out bearings. Makes for a smooth ride. We’ll see how long they hold up. Quality seemed equal to the OEM and they had 150k miles on them. (2007 FJ Cruiser 4WD)
It Fits
April 30, 2019
Fit up went well. Giving only 3 stars because these did not come with new rubber o-ring and have driven on them much just yet. Cleaned my old o-rings and reused them. Only time will tell if they hold up.
Hub assembly
May 3, 2019
I got my 2 wheel hub assemblys in 2 days very prompt service and they were very easy to install if I need anything else I’ll definitely purchase from 1aauto again. Thanks
New hubs and bearings
May 4, 2019
By purchasing the hub and bearing assembly I was able to replace both sides in under 3 hours. The parts fit perfectly and I had no installation problems. No press required!
Wheel bearings for a Toyota Tacoma
May 8, 2019
Quality product an very quick mailing
Fast service
July 5, 2019
It was fast and easy site to used. Even tho I have to return an items due my car was sold. It was an easy process for returning an item as well. I highly recommended.
Front hubs
July 12, 2019
This hubs r great??
Cambiando. Wheels bering
August 10, 2019
Al venir el balero integradocon el hub se ahorra mu ho tiempo yse asegura al 100por ciento.
August 19, 2019
I have ordered from A-1 auto for 3 or 4 years now and have never had a complaint or problem! Always top notch service and easy and fast to find what I need. I even have my brother hooked on them! Just a great company.
No regrets!
August 28, 2019
This was our first time ordering from this company and it certainly won't be the last! We are very pleased with the quality of the parts, the speed of the shipping and the customer service. One complaint though- too many emails. But that is a small price to pay for what we saved.
Fixed my Tacoma TRD OR!
September 7, 2019
I had the frame replaced on my 2009 Tacoma TRD Offroad at 85K miles. By 92K miles my family was wondering why my truck was making so much noise. I determined that the wheel bearings were on their way out, and started researching how to fix. I was horrified to see YouTube videos of people struggling to press the bearings out of the hubs. Then I found these hub bearing assemblies - at a reasonable price! Installation required a floor jack, jack stands, a 50-250 foot-pound torque wrench, some box wrenches, sockets, a hammer and a drift-pin (to push the axle out of the hub), and was easy! In the past 500 miles my family has commented that the truck sounds MUCH better. I am happy knowing that the bearing is not going to let go when I am in the middle of nowhere.
September 15, 2019
Ok very god
well made, very easy to install
October 3, 2019
Hello, This is a very well made, easy to install front wheel bearing set. Direct OEM fitment, no modification needed. if your axle nuts pop loose, should take about 45 mins per side if you take the time to use a torque wrench, Very pleased.
Perfect fit
October 4, 2019
The parts fit perfectly. And they came in a timely manner free shipping
Complete Hub Bearing Assembly- Super Easy
October 11, 2019
Got these for my 07 Tacoma. I also replace rotors and pads while I was in there. This complete assembly makes it so easy with a few simple tools to change them out yourself in your driveway. No pressing bearing or running to a shop for help. Couldn't have ask for a more simple and outstanding quality of product. Fast shipping and great communication. Thanks again you saved me hundreds of dollars.
Wheel bearings
October 16, 2019
I’m very impressed with your company. The web site was great. The price was unbeatable anywhere else, shipping was fast, and the quality of the parts excellent.
Nice Hub at a Great Price.
October 18, 2019
The Good: At this Price Point, The warranty is unmatched by anyone else. Ordered on a Tuesday night, arrived Thursday midday. The Hubs come pre pressed and ready to install. Fitment was perfect. My Tacoma drives nice and quiet down the road without me worrying the wheels are going to fall off. The Bad: That said I wish the hub came with the o-ring that goes between hub and steering knuckle. Also there were metal shavings on the hub when I opened it. I suggest purchasing the inner wheel seal 710573 (mine were shot). This will add < hour to the job. unbolt the steering knuckle from lower ball joint. disconnect the tie rod, move cv shaft out of the way and remove and replace the seal from the knuckle.
November 4, 2019
Everything that I have ordered through here has always been the right part with high quality. Shipping has been fast and on time. Thank you for your expert services. I will continue to order ALL my truck parts through your Company!
Dyi front bearings
November 7, 2019
Everything that i odered fitted perfectly. Great customer service!!!
Appears to be quality product.
December 3, 2019
Just like OEM. Hopefully the product lasts 10 years or 100k miles like the original equipment
Easy Peezy
December 9, 2019
Great purchase bearing came in complete with the hub
Exceptional Quality.
January 16, 2020
The particular parts fitted very well on my Toyota 4Runner, and my car runs as new. I do appreciate that the parts are of exceptional high quality. I was able to advise my brother and friends to buy their car parts from 1a auto, thank you very much for on time delivery also.
Great value and saved me money at the shop!
January 23, 2020
My mechanic was impressed with the quality of the parts I provided and I saved over 3 hours of labor due to the parts having everything necessary to complete the job without usual hassle and complications he stated he experienced with parts provided by his usual supplier.
Much quieter
January 29, 2020
These were pretty easy to install and are much quieter and smoother riding than the worn out bearings they replaced. Everything is working good now. Hopefully they're well built and durable but only time will tell. So far so good.
2007 Lexus GX370 Wheel hub assembly
February 4, 2020
Ordered these after dealer wanted a lot to replace the bearing on my front right wheel. Originally was going to install myself but just had a local brake shop install them. 2.5 hours of labor.. A great experience and the suv sounds and runs awesome!
2012 Tacoma 4x4
February 25, 2020
Shipping was fast. Received on date as indicated on purchase. Parts look like high quality new manufactured items. Removing old parts and installing new ones was super easy. It was made possible by the awesome diy video. I had to “bonkâ€� the old parts loose. Lol Fully recommend. I’ll definitely buy other parts from A1 Auto!
Amazing customer service and price
February 25, 2020
1A Auto came up on a Google search for wheel bearings I was in desperate need to have replaced. I had gone to a mechanic, however, I needed to find a way to save some money. They agreed to use customer supplied parts, so my search began. I found these parts at a price that was slightly over the cost for one. The customer service rep was wonderful on the phone and I had my parts in two days. My mechanic asked where I got them, and I proudly said 1A Auto. It seems they are familiar with you. Thank you for everything!!
March 5, 2020
The bearings came well packaged with thread lock and all. Very quality part with easy install.
The best quality and cost.
March 25, 2020
Was skeptical about the quality because it was soo much cheaper then anywhere else, but I am very pleased. It arrived timely, and bolted on simply. The fit and quality appears as good as the more expensive brands.
Perfect Fit and a excellent price
March 27, 2020
Product arrived in just two days. These were a perfect fit for my Tacoma. I replaced them both in about three hours after watching the excellent instructional video at 1aauto.com. The price was fantastic. Installation easy. This saved me $1000 from the estimate that a local shop gave me. I highly recommend these and even more so to buy them from 1A Auto.
Fixed the problem
April 8, 2020
Relatively easy to put on. So far they work great on my wife 2007 Tacoma
April 17, 2020
Great price. Easy install.
New Front End
April 22, 2020
Redid the front end on my Toyota Tacoma and couldn't be happier thank you so much!
Great replacement
June 24, 2020
I didn’t even notice the front wheel bearing noise worsening until I had my truck inspected this year. I guess over time I didn’t notice the bearing noise increasing. I purchased these bearing and hub assemblies and the my shop said they went in perfectly. I noticed the difference instantly...riding smooth as silk. The website to order the parts was intuitive and the price point was excellent. Highly recommended!!
wheel bearing and hub assembly
August 7, 2020
I replace both the axle shafts and wheel bearing assemblies at the same time. After changing the axle shaft I moved onto the wheel bearing assembly. When I tried to attach the wheel bearing assembly to the spindle, I found that the supplied bolts were a little over a 1/4" too long and would bottom out in the blind hole of the spindle. Leaving the hub and bearing assembly loose. Since these were put into the face of the mounting surface before the bearing assembly was pressed, there was no way to remove them to shorten them. Had to shorten the supplied bolts still attached to the hub assembly with a porta band and rethread them so they would start in the spindle and not crossthread. Other than that seem to work fine
Perfect fit and great price
August 22, 2020
The product and workmanship was top notch. This was a exact fit.
Quality parts
August 25, 2020
Perfect fit, great price, and thus far everything seems to be working fine
Flawless fit, heavier duty than stock
September 21, 2020
Loved these hubs, stock hubs broke 2 lug studs and began clicking on turns. That all went away after a smooth 1 for 1 swap of both front Hubs on my FJ Cruiser. Total install less than 2 hours, back on the road, was quoted over 750$ to have it done at the shop. Thank You 1a
2 piece wheel bearing set 2007 tacoma
September 26, 2020
Nice bearings easy to change have videos to help and lifetime warranty can’t go wrong with these parts
October 1, 2020
Had a noise coming from the front driver's side of my Tacoma. Discovered it was wheel bearing/cv axle. Watched 1A AUTO videos, figured I could do it myself, bought the parts, installed them - Tacoma rides smooooooth as butter now! Very pleased with 1A AUTO!
Fixed my noise issue
October 24, 2020
This product looks like it's high quality. After installing these bearings on my 2012 Tacoma, it fixed the noise that I kept hearing from my worn out OEM bearing. Great price and great product!
parts needed fast
October 24, 2020
My son have a 2006 tacoma which had some bearing issues because of the 6" lift. I checked the website for the correct pats and fit for our needs. I ordered and they arrived fast. We installed the parts and they were perfect/they work great. Much less than going to the local Toyota dealership-thanks 1A-Auto
wheel bearing hubs make it a snap
November 1, 2020
My friend and I removed and replaced my wheel bearing hub assemblies on my 2008 Tacoma in 2 hours. I felt that a new gasket would have been nice instead of using the old one. Also it took a significant part of the two hours to get the axle hubs back on. Suspect a tolerancing issue but we were able to get it done. Parts seemed to be high quality, time will tell. Thanks!
Best overall car parts service!!
November 2, 2020
Loved the whole process. From customer assistance, detailed help with videos and lists of tools needed, and the installation by myself. I've made it a point to tell everyone about this site. It saved me 2k in repairs this time and more moving forward.
Easy to install
November 5, 2020
This is an oem quality and the shipping is fast and its free. Compared to the the in the dealership
November 9, 2020
Purchased these for multiple different vehicles and have had no issues. Last just as long as the expensive factory replacement parts. Would recommend to anyone. Fast shipping as well!
Perfect fit. Excellent DIY walkthrough
November 9, 2020
This was my first time replacing a wheel bearing and hub assembly myself, but 1A Auto delivered with the part that was exact to spec and detailed DIY replacement instructions with an excellent video and tools list. I will be buying many more parts from 1A Auto and doing as much work as possible on my vehicle myself. The only thing I wish 1A would publish is how to replace the gasket seal that goes behind the wheel bearing and seal the place where the axle comes through (this was mentioned in the video but no details were given on how to properly do this).
November 9, 2020
This was an efficient and affordable way to swap out the front bearings on my Tacoma. Thanks!
Fixed my Truck!!
November 21, 2020
Purchased this set of wheel hub assemblies for my 2009 Tacoma. Easy install. The howling noise is gone. Quality part that is a direct fit. You will have to reuse your oring unless you track one down at the dealer. I am a mechanic by trade and watched the video for quick reference and found it well done. Took me about 2 hours per side, this included changing rotors and brake pads. You have them off, so why not. Purchased them from 1A also.
2004 4Runner hub assembly and rotors
November 22, 2020
From a novice who has little mechanical background, the ordering and shipment was simple and fast, and the how to videos were spot on. Ordered new hub assemblies, rotors, and pads and got it all done at once. Oddly enough, I think cosseting pin gave me the most grief. Only had things on for a day, but everything sounds and rides like new. Ready for another 145,000 miles. Thanks and I will recommend to anyone of my 2 friends. Lol.
The best!
November 30, 2020
Fast shipping, fantastic packaging, and an easy to use website! Will be purchasing parts from 1A from now on.
Wheels Hubs.
January 10, 2021
Great part for the car perfect fit and also had a video to help put the wheel hubs in. Only bad part was there should have been a new seal added instead reusing an old one. I’m very pleased and happy with 1Aauto will be buying parts from them in the future.
January 13, 2021
I ordered these hubs and they shipped to my house pretty quick. Got them and noticed the quality right away. Great parts, Great price. Will definitely be ordering more parts for my other Toyota vehicles in the near future. They followed up with an email from the president of A1auto to insure my satisfaction. Very pleased.
Very High Quality
January 15, 2021
Well my hubs started grinding, decided to check out 1A auto site for a well priced part and WHAM!, took it to the shop and BOOM Installed. Very high quality for the price. I’m buying here from now on, also check out their YouTube channel , very informational.
Trusted, Reliable, Quality Wheel Bearing Hub Assembly
January 22, 2021
First time purchasing from 1A Auto, after watching a few videos on YouTube. Very satisfied with the quality of parts. NOTE for those of you shopping around for best price, 1A Auto is not the cheapest, but these bearing & hub assemblies from 1A Auto have a lifetime warranty. That is worth the extra cost right there.
not OEM
January 23, 2021
While these have a great price and warranty, they come lacking seals and o-rings that will need to be replaced while doing the repairs. Additionally, I doubt that they are OEM spec as I really struggled to get the dust caps installed on these new hub assemblies (yet could easily get the original and new dust caps on and back off the vehicle manufacturer's original hub assemblies). Since installation, I have also had a bit of a shimmy or shake feeding back through the steering wheel that I suspect is caused by these. I've also since seen reviews by others on other forums that have had to warranty replace these within a year or two (10-20k miles) which is not at all appealing...
exactly what I needed for the best price
February 22, 2021
Perfect fit for a 2011 tacoma 4wd. Seem to be good quality
Just missing a few things
March 19, 2021
Great product and super fast delivery. The only thing it's missing is a new o ring seal for the back of the hub. You will need to get this part from a Toyota dealership for $4 each. If you included that I would rate 5 stars.
March 29, 2021
Fixed the roaring. At a fraction of the cost but still impressive quality
front hub assemblies
March 31, 2021
I purchased front hub assemblies for my 2006 Toyota 4runner and as usual 1aauto sent them to me in record time, however they were damaged by the shipping company but 1aauto reshipped them to me and I installed them and they fit perfectly as expected. I will continue to use them in the future. GREAT COMPANY!
April 13, 2021
I would recommend this product.Everything fit as it should and was a good price.
Great quality part
April 17, 2021
My FJ has over 284,000 miles on it so I choose to replace my wheel bearings and hubs at the same time I replaced the Axles. Great fit and everything was included to complete the Install.
Looks great so far.
May 24, 2021
Looks like a pretty nice piece. Nothing to complain about. Hardware seems quality.
June 10, 2021
The product fit and works, and it came in a timely manner! That's saying a lot in today's society!!!
Customer Q&A
what company manufactures these assemblies?
April 24, 2017
I don't know. I did replace both sides with them and they fit my 2009 Tacoma perfectly. They seem to be of good quality and they have performed flawlessly.
April 24, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
April 25, 2017
Do these come with seals and o-rings?
October 15, 2017
They are fully put together so the seals and o-rings are in place
October 15, 2017
October 16, 2017
These are complete assemblies, and do not include any additional seals or o-rings.
October 16, 2017
no they are built and ready to install .
October 16, 2017
The hub and bearings come complete in one piece but you have to re-use the black o-ring seal that is on your old set or hub you are replacing.
March 1, 2019
Mine did not come with o-rings. Had to reuse my old ones.
April 30, 2019
No. The seals and o rings have to be purchased separately.
January 29, 2020
what is the warranty for the bearing? does it go by miles or time?
February 14, 2018
These hubs have a lifetime warranty on them. Thank you!
February 15, 2018
I have bought a lot of parts and with the exception of drive train engine, transmission. I have never seen a part especially a wear item have a mileage warranty. They are always time, and these wheel bearings are also time. That is available on the website.
February 16, 2018
Depends on manufacture. Some have a 3 year if new. If remanufacture they have a one year. If installed correctly they will last a long time.
February 16, 2018
Are these American made and America steel?
June 16, 2018
These are made overseas in either China or Taiwan.
June 17, 2018
How will these hold up on a lifted Tacoma with a 6 inch lift, 18 inch wheels and 35x12.50 all terrain tires?
June 19, 2018
Hello, these parts should be able to work for you but we do not sell any parts specifically for lift kits.
June 19, 2018
It’s a good quality part. Have it on my stock 07 Tacoma with no problems. Probably would have a little less lifetime on a lifted truck with bigger tires due to more stress. That’s just my opinion.
July 2, 2018
You will find that you must reuse the o ring frim your existing assemblies
July 28, 2018
Will this fit a 2003 4Runner that is NOT 4 wheel drive?
June 23, 2018
This will only fit 4 wheel drive models.
June 23, 2018
Is that come with abs sensor?
August 20, 2018
No just a hub and a place for abs sensor so you can install your old one
August 20, 2018
No - the ABS sensor sits inboard of the bearing assembly
August 20, 2018
August 20, 2018
No it does not come with the abs sensor. That is separate.
August 20, 2018
Will this fit a 2 wheel drive 2008 Toyota Tacoma?
September 13, 2018
No, these wheel bearings will not be compatible with your application and we currently do not carry this part for your vehicle. We're always updating our inventory so please check back soon! If you have any other questions, let us know.
September 14, 2018
Because this is the bearing and hub assembly together, will I not need a bearing press to swap out the front bearings on my '07 Tacoma 4x4?
November 28, 2018
No you will not need a bearing press
November 28, 2018
yes you are right, you don’t need press to assembly all parts together, it’s all ready assemble
November 28, 2018
Correct. You will not need a bearing press.
November 28, 2018
Correct, you will not need a bearing press. Simply a bolt on item.
November 28, 2018
No need for a bearing press. The assembly comes with bearings already pressed in. All you need to do is unbolt the old one and bolt on the new one.
November 28, 2018
Correct, the item is preassembled and the bearing will already be pressed into the hub upon receipt.
November 28, 2018
Nope...you will not need to do anything like that....Assembly is already complete and ready to install....did this on my '07 Tacoma and my '07 FJ
December 5, 2018
Will this fit my 97 4runner?
February 27, 2019
This part will not fit your vehicle. We may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle.
February 27, 2019
Is this a stronger bearing than what comes in the fj cruiser stock?
May 11, 2019
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
May 12, 2019
Does this come pre-packed with grease? If not, what kind would you recommend?
June 10, 2019
Yes these come greased, ready to be bolted on the vehicle!
June 11, 2019
Will these fit my 2008 TRD sport 4x4?
October 29, 2019
Yes, these will fit all 2005 to 2014 Toyota Tacoma's with 4WD. Thank you for the inquiry!
October 29, 2019
Will these fit rear wheels on 2006 Toyota Tacoma Pre runner?
April 28, 2020
This will fit on the Pre runner if it has 4WD.
April 28, 2020
Does this fit a 2wd tacoma?
June 19, 2020
This only fits the 4WD model. What is the year of your Tacoma? We can see if we have these for 2WD. Thank you for the inquiry!
June 19, 2020
Will this fit my 2015 Toyota Tacoma 4x4?
June 24, 2020
Hey Justin, This kit is not listed to fit your Toyota.
June 24, 2020
Yeah it’s a question ?
July 25, 2020
Thank you for inquiry! We would be more than happy to answer any questions you may have. Please let us know so we can better assist you, thank you!
July 28, 2020
Does the inner hub have the magnetic retainer for the abs sensor to read off?
July 27, 2020
Thank you for your inquiry, Robert! Yes these will have the magnetic strip for the ABS sensor.
July 27, 2020
Whats the spline count?
September 1, 2020
29 .. fit perfect on my 2009 Tacoma 4.0 4x4
September 2, 2020
Thank you for the inquiry. We do not have the spline count available, however, these will be made to the same specifications as the OE parts.
September 2, 2020
Are the parts interchangeable left and right? or is there a specific left and right bearing
October 8, 2020
October 8, 2020
Part was interchangeable . I bough these and installed in a Tacoma with no issues. Still driving and functioning on my truck now .
October 8, 2020
Thank you for the inquiry! These parts are interchangeable. Please let us know if you have any additional questions.
October 8, 2020
I Purchased both because when one side goes bad the 2nd follows and in my opinion changing both is the better option for me and they are interchangeable.
October 8, 2020
Paprework has part# 1ash00951 What showed up is 1ashf00485?
October 21, 2020
Thank you for your inquiry, Wayne! Part number 1ASHS00951 is the pair SKU for the hubs you ordered, which is made up of two 1ASHF00485. As long as you received two 1ASHF00485 then you received the correct parts!
October 21, 2020
Does anyone know the part # for the O-ring, and hub dust cap? They are usually damaged (or just need replaced) when removing the old assembly.
October 22, 2020
43514-28010 is the dust cap, I don't believe an o-ring on the cap, it should be pressure fit onto the hub. As long as it is not damaged during removal, the cap should be reusable.
November 6, 2020
My stock dust cap is larger than the wheel bearing will allow, I am not sure if this is a machining error, or if the part requires A specific TRQ dust cap. Either way, no mention of needing a dust cap or an O-ring. The O-ring is an essential piece that would have been a worthwhile add on. I will be removing the TRQ assembly as it is not the best fit.
December 6, 2020
1ASHS00951 does this part have the abs sensor?
November 25, 2020
These wheel hubs will not include the ABS sensor with the assembly.
November 25, 2020
What bearing are used in the hubs?
December 31, 2020
This will have tapered wheel bearings.
January 4, 2021
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation. See all trademarks.

Toyota Lexus Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ-1ASHS00951 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2007 Toyota FJ Cruiser with these options.