1AAHK00046-Toyota Lexus Front 4 Piece CV Axle Shaft Set


Toyota Lexus Front 4 Piece CV Axle Shaft Set TRQ


Part Details

  • Bearing Type: Tapered Roller Bearing
  • Includes: Hub Assemblies
  • Set Quantity: 4 Piece

This part replaces:

  • OE # 4350260180
  • Hollander 447-61646
  • OE # 4350260200
  • OE # 4343060082
  • OE # 4357060010
  • OE # 4357004011
  • Hollander 538-58964
  • Dorman 4110446
  • A1 Cardone 66-5235
  • OE # 4343060081
  • Hollander 447-51436
  • OE # 4357004010
  • OE # 4343004070
  • TRQ CSA64083
Save 25%
List: $370.95 Save: $91.00
Part 1AAHK00046
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: CSA64083

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Hub Assemblies
  • Set Quantity:   4 Piece
  • Bearing Type:   Tapered Roller Bearing

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:23)
    • Raise the vehicle with minimal weight on the wheel
    • Loosen the six 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the six lug nuts
    • Remove the wheel
  2. step : Removing the Brakes (0:47)
    • Pry against the brake pads to compress the brake pistons slightly
    • Remove the brake line retaining clip
    • Remove the 12 mm bolt to remove the brake line retaining bracket
    • Remove the tie rod cotter pin
    • Remove the 19 mm tie rod castle nut
    • Hammer on the knuckle to loosen the tie rod and remove it
    • Remove the two 17 mm caliper bolts
    • Remove the brake caliper and hang or support it
    • Remove the brake rotor
  3. step : Removing the Axle (4:12)
    • Remove the axle hub cap
    • Remove the axle cotter pin
    • Remove the axle nut retaining cap
    • Remove the 36 mm axle nut
    • Disconnect the ABS wire electrical connector
    • Pry the ABS wire retaining clip on the wheel knuckle and remove the wire
    • Remove the 18 mm nut to remove the sway bar link from the knuckle
    • Remove the upper control arm cotter pin
    • Remove the 19 mm upper control arm axle nut
    • Remove the upper control arm from the knuckle
    • Remove the two 19 mm lower ball joint bolts
    • Remove the knuckle
    • Tie off the axle around the strut to prevent it from falling
    • Hammer or pry the axle out of the front differential
    • Untie and remove the axle
  4. step : Installing the Axle (17:39)
    • Insert the axle into the differential
    • Tap the axle in to seat it fully
    • Install the knuckle onto the axle and align it with the lower ball joint bracket
    • Install the two 19 mm lower ball joint bracket bolts
    • Install the sway bar link into the knuckle
    • Install the upper control arm into the knuckle
    • Install the 19 mm upper control arm castle nut
    • Install the 18 mm sway bar link nut
    • Torque the 19 mm upper control arm castle nut to 81 ft-lb, and continue tightening if necessary to align the nut with the cotter pin hole
    • Install the upper control arm cotter pin
    • Install the axle nut
    • Torque the axle nut to 173 ft-lb
    • Install the axle nut retaining cap
    • Install the axle cotter pin
    • Apply gasket maker to the axle hub cap
    • Install the axle hub cap
    • Reconnect the ABS wire electrical connector and reseat the wire in the retaining clips
  5. step : Installing the Brakes (24:32)
    • Install the brake rotor onto the wheel studs
    • Temporarily install a lug nut to hold the rotor in place
    • Apply brake grease to the pad surfaces of the brake caliper, and the rims of the pistons
    • Install the brake caliper
    • Install the two 17 mm brake caliper bolts
    • Torque the 17 mm caliper bolts to 91 ft-lb
    • Reinstall the brake line retaining bracket
    • Reinstall the 12 mm brake line retaining bracket bolt
    • Reinstall the brake line retaining clip
    • Remove the temporarily installed lug nut
    • Reinstall the tie rod into the wheel knuckle
    • Install the 19 mm tie rod castle nut
    • Torque the 19 mm castle nut to 67 ft-lb, continue tightening to align the castle nut with the cotter pin hole if necessary
    • Insert and peen the cotter pin
    • Press the brake pedal to seat the brake pads
  6. step : Checking the Differential Fluid Level (31:57)
    • Remove the 10 mm hex differential fill plug
    • Insert your finger or a pick into the fill hole to check the fluid level
    • The fluid level should be just below the rim of the fill hole
    • Top off the fluid with 80W-90 gear oil if necessary
    • Reinstall the 10 mm hex fill plug
  7. step : Installing the Wheel (32:28)
    • Install the wheel onto the wheel studs
    • Install the six lug nuts and tighten them by hand in a crossing pattern
    • Lower the vehicle with minimal weight on the wheel
    • Torque the 21 mm lug nuts to 85 ft-lb in a crossing pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • RTV

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Pocket Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 21mm Socket
  • 36mm Socket

  • Specialty Tools

  • Brake Caliper Hanger

  • Wrenches - Metric

  • 24mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this set come with all the seals necessary for direct installation?
James W April 2, 2019
It has everything but the rubber gasket that goes on the hub when you put it back on the spindle but mine was good enough to use my old one
O Z April 2, 2019
This hub and axle set comes just as pictured, and will not come with any additional seals.
Tim K April 3, 2019
Will this work with 4wd?
Trey S September 2, 2019
B R September 3, 2019
Thank you for your inquiry. This kit will be correct for 4WD models. Please contact us if you have any further questions.
Anthony C September 4, 2019
What brand are these parts?
Miguel L September 17, 2019
1A Autos house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicles exact OEM specifications. Please let us know if you have any other questions.
Emma F September 18, 2019
Does this work well with lifted Tacomas(3") suspension only?
John C October 8, 2019
Yes. Bought to replace worn factory units from lifting my truck 6 inches.
B R October 8, 2019
Thank you for the inquiry. We do not recommend our parts being installed on vehicles with lifts of 3" or more.
Christa R October 9, 2019
Are the hubs fully assembled and bolt on ready. Also do the axles come pre greased?
Kagan W October 9, 2019
Yes to both. Just put a bit of grease on splines to aid in slipping into differential.
B R October 9, 2019
S A October 9, 2019
Yes hubs are preassembled just need to be greased where the wheel speed sensor is. And the CV axles are pre greased ready for install
Q U October 9, 2019
Thank you for the inquiry. These will come pre-assembled as shown in the listing images. The cv axles do come pre-greased.
Christa R October 9, 2019

Fits the following Makes:

Year Make Model Description
2010-2016Lexus GX460 Lexus GX460 Front 4 Piece CV Axle Shaft Set
2003-2009Lexus GX470 Lexus GX470 Front 4 Piece CV Axle Shaft Set
2003-2016Toyota 4Runner Toyota 4Runner 4 Wheel Drive Front 4 Piece CV Axle Shaft Set
2007-2014Toyota FJ Cruiser Toyota FJ Cruiser 4 Wheel Drive Front 4 Piece CV Axle Shaft Set
2005-2015Toyota Tacoma Toyota Tacoma 4 Wheel Drive Front 4 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-5235
Cardone Select 66-5235
Coast To Coast 515040
Dorman - OE Solutions 4110446
GSP NCV69170
Hollander 447-51436
Hollander 538-58964
Hollander 447-61646
Lexus 4343060060
Lexus 4357004011
Lexus 4350260200
Lexus 4350260180
Lexus 4343060082
Lexus 4343060081
Lexus 4357004010
Lexus 4357060010
Toyota 4343060060
Toyota 4343004070
Toyota OEM 4343060060
Toyota OEM 4343004070

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: CSA64083
Product Reviews
4.40/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Looks good so far havent got them in yet though. Kinda disappointed they didnt come with a sticker too
March 30, 2019
Great price
Exactly what I needed at a very good price. Shipped promptly and arrived to me next day
July 30, 2019
Trq hub and axle
Fast shipping and great customer service. Response to my question and replacement was right away. Thank you
September 11, 2019
Toyota fj cruiser
Happy so far thank you
October 9, 2019
Not so fast shipping
They say fast shipping, well if you call 8 days fast shipping then I guess it is but not me. Parts are from China, NOT USA made. The parts seem to be good quality though. I just installed.them and everything fit nicely. Customer service was adequate at best. I called several times on my shipment only to get a 15 minute wait, and when I did get them on the phone they just blew it off. Price was very fair. I saved about $100 buying my kit here. Thats a honest review from a back yard mechanic.
October 20, 2019
Great fit!
Product was perfect fit on my fj cruiser! Thanks 1a! Super fast shipping and great products!
November 13, 2019
Toyota FJ Cruiser Axle Shafts and Hubs
Received Set and replaced the parts similar to the video 1A Auto provided on-line. Everything when smoothly after some hand sledge help. Only issue is that the hub seal was damaged, recommend that the seals be a strong recommendation to the set.
February 18, 2020
2007 Toyota 4Runner
I was looking for some parts for my Toyota and wit my good luck I found whatever I was looking for with good price.
March 12, 2020
2004 toyota 4runner axel /bearing kit
Very well packaged Very well made axel pop at full extension if you drive on the road youll never notice it only if you go offroad and experience full wheel drop it will pop and possibly break a axel in a bind but for everyday driving they work and the price is great
March 19, 2020
Overall Outstanding
From top to bottom this process was great. Great price, quick shipping (even during the pandemic), awesome tutorials, and great quality parts. Definitely coming back for all my vehicle needs.
July 2, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Lexus Front 4 Piece CV Axle Shaft Set TRQ-1AAHK00046 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.