Replaces

Toyota Lexus Engine Knock Sensor Harness - 1AEEK00588

Click Here to Select Your Vehicle and Verify Fit
00-06 Lexus, Toyota V6 3.0L Knock Sensor & Harness Set

Frequently bought together

00-06 Lexus, Toyota V6 3.0L Knock Sensor & Harness Set
Toyota Lexus Engine Knock Sensor Harness
$129.95
OBDII Multilingual Scan Tool
OBD2 Diagnostic Scan Tool Performance Tool
$37.95
Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement engine knock (detonation) sensor and harness kit is just what you need to get your vehicle in good running order again!

Specifications:

  • Comes as a SET of 3
    • (1) - Engine Knock Sensor Harness
    • (2) - Engine Knock Sensors
  • Replaces dealer part number: 82219-07010, 82219-33030, 89615-12090, 89615-32010, 8221907010, 8221933030, 8961512090, 8961532010
  • Direct replacement
  • Built to strict quality control standards

This engine knock sensor & harness kit makes a great replacement and has good cost savings over a dealer set.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Engine Knock Sensor (1:18)
    • Raise and support the vehicle on a jack and jack stands
    • Disconnect the electrical connector
    • Remove the sensor with a 27mm socket and ratchet
  2. step : Installing the Engine Knock Sensor (2:12)
    • Tighten the sensor with a 27mm socket and ratchet
    • Connect the electrical connector

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

    • Sockets - Metric

  • 27mm socket

4.11/ 5.0
19 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
3
3
0
2
harness connection
no problem connecting to the two knock sensors but the connection to the cars harness was poor. Would not snap together and I had to improvise with electrical tape to make the connection. Cant say I was satisfied but I was able to solve the CEL issue.
March 2, 2017
Lexus RX300 repair
Fit perfectly. Check engine light cleared and running great!
March 15, 2017
Awesome
By far the least expensive way to go because it comes with both sensors and the harness as well which is what makes it such any affordable option. Most places wanted 70 to 90 for a single sensor.
June 22, 2017
2001 Toyota Highlander Eng Knock Sensors
I installed two Engine knock sensors and they work great.. very good price on parts.. Thanks...
June 23, 2017
No isues;working fine
I had my mechanic install these knock sensors and harness in a 2001 Toyota Highlander. The car has been running fine with no issues since the install a couple of months ago.
June 29, 2017
Satisfaction
Quality parts, order reached as promised. Great customer service. Looking forward to do business with you guys again. I would recommend A1 Auto to anyone who need quality engine parts.
July 9, 2017
2003 Sienna
Good Price on the product and it fit the application. Having both sensors and the harness was good due to the location of the sensors.
February 23, 2018
Perfect fit.
Always good service from A1. The product worked perfectly and solved my warning light problem. These are buried deep in the engine so having a quality product is really satisfying. I wouldnt shop anywhere else.
February 24, 2018
Harness Wouldnt Clip In
The knock sensors fit perfectly but the Sensor Harness wouldnt clip into the factory harness after removing the original harness. Had to come up with my own solution to get the male/ female ends of the harness to stay together.
May 25, 2018
Parts were a good price, on time delivery, working perfect in the car. Would definitely use them again.
July 30, 2018
02 Camry Parts
The knock sensors fit very well...the harness clicked into place well with the sensors, at the main connection doesnt click on but stays in place...the gaskets are perfect fit and so are the sparks!
August 5, 2018
first i bought a knonk sensor for my 200 RX300 good price as the saying says you get what ypu paid for my mechanic installed it gor me the parts was defective i couldnt afford the dealers HI prices I searched and found 1A auto i took my chances with them i received my order in a few days the packaging was quality the knok sensor was perfect gaining gas mileage i recommended them to a friend who ordered a tail light
November 22, 2018
Knock sensors worked great harness connector bad
The knock sensors worked like they should but the harness wouldnt stay plugged in. The tab that connects to the detent on the connector wouldnt hold. Just kept coming unplugged. Had to get another one off a salvage car engine to make it work.
December 25, 2018
Does not Fit Camry V6
The part was supposed to be OEM equivalent, but it did not fit. The sensors fit properly, and the connectors mated with each knock sensor correctly. However, the other connector (4 pins) did not mate properly. It seated correctly but it would not snap into place. I tried all kinds of things, but couldnt get it to click in - though it seemed REALLY close. I ended up cutting off the connectors for the old and new harnesses, and then soldered the old connector (known to fit) onto the new harness. It worked fine, but took me an extra hour of effort. I called 1A Auto to see if they would do something for me for the bad part they sold me, but they would not. They said I should have called and then ordered a replacement. Unfortunately, I had the top part of the engine torn apart and did not have time for replacement parts via mail. Regardless, they said the part would fit and it did not. I try never to say never, but am having a hard time imagining buying anything else from 1A Auto.
February 5, 2019
Illinois Vehicle Emissions inspection .
Ordered the Engine Knock SenSors and Harness to clear the "Not Ready" reading on my Emission inspection to "Ready" Thank you 1A Auto.
March 30, 2019
Great product
Great product great value great customer service
April 27, 2019
Knock sensor
Absolutely perfect fit for my 2000 Toyota Sienna! No problems at all. Thanks to new sensors I get better gas mileage! Thank you 1A Auto!!
June 22, 2019
Lexus picky about knock sensors
giving this a 3 star review because I am having to replace the knock sensors again with OEM parts, like others I’ve seen review this product. Shipping was fast. The O2 sensors, and knock sensor harness both worked. I purchased the knock sensor kit that included both knock sensors, and the harness, although only knock sensor 1 was showing bad. It was cheaper to get the kit than to order one OEM sensor. But it is now costing me an additional $600 to have the knock sensors replaced with OEM parts because the engine does not like aftermarket knock sensors. I have a 2000 Lexus RX 300 with 228K miles. Invest in OEM knock sensors to save yourself a lot of time, and money!!!
June 27, 2019
Saved me about $650 for these parts!
I got an estimate from my repair shop that it would be about $1100 to fix my knock sensors to get my check engine light to go off. Its an old car and not really worth that much, so I decided to double-check with a friend. He said the expensive part would be the knock sensors-harness kit and it was very labor-intensive, but he would do it for a very reasonable price. I looked online and found the Toyota knock sensor-harness kit for about 1/3 of what he told me it would probably cost. It saved me a big chunk of money for him to do the work and it runs better than it ever has! Thanks!
November 13, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this OEM part?
Korrina C April 6, 2016
It is not an OEM part, as form toyota "genuine" part, however it worked just fine. fyi toyota replacement $300+ for 2 sensors and harness.
Ramon R April 6, 2016
I dont know but everything fit and functioned perfectly.
Matt W April 7, 2016
I dont know but who cares because it worked the same. Put this kit in & fix the problems.
Joe S April 7, 2016
No,
Frank S April 7, 2016
I purchased this kit last year and it installed with no issues and I no longer received an engine warning light. As far as it being OEM, Im not sure as this stands for Original Equipment Manufacturer and I dont know who manufacture is.
Daniel P April 7, 2016
No, this is an aftermarket product but I have had no problems with them.
Josh N May 17, 2016
Will the wire harness fit perfect with the connections on my 2000 toyota Avalon XLS as well as the knock sensors that comes with?
Patrick C May 11, 2017
As long as your vehicle is a V6, 3.0L engine the wire harness will be a plug and play.
Alex P May 11, 2017
Year Make Model Description
2000-2001Lexus ES300 Lexus ES300 V6 3.0L Engine Knock Sensor Harness
2000-2003Lexus RX300 Lexus RX300 V6 3.0L Engine Knock Sensor Harness
2000-2004Toyota Avalon Toyota Avalon V6 3.0L Engine Knock Sensor Harness
2000-2001Toyota Camry Toyota Camry V6 3.0L Engine Knock Sensor Harness
2002-2006Toyota Camry Toyota Camry V6 3.0L (US Built Models) Engine Knock Sensor Harness
2001-2003Toyota Highlander Toyota Highlander V6 3.0L Engine Knock Sensor Harness
2000-2003Toyota Sienna Toyota Sienna V6 3.0L Engine Knock Sensor Harness
2000-2003Toyota Solara Toyota Solara V6 3.0L Engine Knock Sensor Harness
1
Part 1AEEK00588
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.