1AACS00071-Toyota Lexus Driver & Passenger Side 2 Piece CV Axle Shaft Set


1997 Toyota Avalon Driver & Passenger Side 2 Piece CV Axle Shaft Set

Guaranteed to fit 1997 Toyota Avalon

97-01 Lexus ES300; 97-04 Avalon; 97-01 Camry 3.0; 99-03 Solara 3.0; 98-03 Sienna CV Axle Shaft Pair
26% OFF
26% OFF
Brand CSA82461
In Stock

Orders must be placed by 2pm ET
Part 1AACS00071
In Stock
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together


Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   2 Piece

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace CV Axle Passenger Side 92-01 Toyota Camry

Created on: 2021-01-16

Learn how to replace the CV axle shafts on your 92-01 Toyota Camry. 1A Auto shows you how in this video.

  1. step 1 : Removing the Wheel
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Removing the Axle Nut
    • Bend the cotter pin straight out with needle nose pliers
    • Pull the cotter pin up and out
    • Remove the lock cover on the nut
    • Hold the hub still with a pry bar
    • Break the axle nut socket loose with a 30mm socket and breaker bar
    • Leave the nut at the end of the axle
    • Hammer the axle out
    • Remove the axle nut
  3. step 3 : Removing the CV Axle from the Spindle
    • Remove the ABS retainer from the spindle
    • Break the 22mm strut nuts loose and remove them
    • Tap the bolts out of the spindle with a punch and hammer
    • Pull the spindle down and out of the strut
    • Pull the axle out of the spindle
  4. step 4 : Removing the CV Axle from the Differential
    • Have a drain pan ready
    • Remove the 14mm bolt from the bearing on the end of the axle shaft
    • Push together to two tabs from the snap ring
    • Insert two pry bars to 3 and 9 o'clock on the axle, applying even pressure
    • Carefully work the snap ring out of its holder inside the differential
    • Remove the axle from the differential
  5. step 5 : Installing the CV Axle to the Differential
    • Align the axle splines with the splines in the differential
    • Work the axle into the differential
    • Insert the snap ring around the CV axle, aligning the ears up
    • Tighten the 14mm bearing bolt
    • Torque the bolt to 24 foot-pounds
  6. step 6 : Inserting the CV Axle to the Spindle
    • Line up the splines into the hub
    • Start the axle nut on the end of the axle
    • Reinstall the 22mm strut bolts to the spindle
    • Tighten the nuts to 156 foot-pounds
    • Connect the ABS retainer
  7. step 7 : Installing the Axle Nut
    • Tighten down the axle nut with a 32mm socket and ratchet
  8. step 8 : Reinstalling the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to partial weight on the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Lower the jack
    • Torque the axle to 217 foot-pounds
    • Reinstall the lock cap and new cotter pint to the axle nut
    • Reinstall your hubcap

Tools needed for replacement

  • General Tools


    Jack Stands

    Center Punch

    Drain Pan

    Floor Jack

  • Pliers, Cutters & misc Wrenches

    Needle nose pliers

  • Ratchets & Related

    Torque Wrench


  • Screwdrivers & Related

    Pry Bar

  • Sockets - Metric

    12mm Socket

    21mm Socket

    32mm Socket

    22mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
1997-2001Lexus ES300 Lexus ES300 Driver & Passenger Side 2 Piece CV Axle Shaft Set
1997-2004Toyota Avalon Toyota Avalon Driver & Passenger Side 2 Piece CV Axle Shaft Set
1997-2001Toyota Camry Toyota Camry V6 3.0L Automatic Transmission Driver & Passenger Side 2 Piece CV Axle Shaft Set
1998-2003Toyota Sienna Toyota Sienna Driver & Passenger Side 2 Piece CV Axle Shaft Set
1999-2003Toyota Solara Toyota Solara V6 3.0L Automatic Transmission Driver & Passenger Side 2 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
Cardone New 66-5168
Cardone New 66-5169
Cardone Select 66-5169
Cardone Select 66-5168
GSP NCV69544
GSP NCV69581
Lexus 4341006170
Lexus 4342006170
Toyota 4341008020
Toyota 4342006170
Toyota 4342007030
Toyota 4342008010
Toyota 4341008010
Toyota 4341007030
Toyota 4341007031
Toyota 4341006170
Toyota OEM 4341008020
Toyota OEM 4341007030
Toyota OEM 4342007030
Toyota OEM 4341008010
Toyota OEM 4341007031
Toyota OEM 4342006170
Toyota OEM 4342008010
Toyota OEM 4341006170

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand CSA82461
In Stock
Product Reviews
4.87/ 5.0 15
Great Company!
June 29, 2017
Great product and shipping was on time. I would definitely order here again!!
Best customer support around!!!
February 13, 2018
I had one shaft damaged by UPS. I immediately called 1A Auto and they sent me a replacement part right away. I could not express to you how helpful they were in getting the problem solved. The parts are high quality and fit perfectly. I am very pleased with my purchase.
Excellent service
August 25, 2018
Purchased replacement axles for my 1998 Toyota Avalon. I noticed while loadimg them to take tothe mechanic the driver side box was empty. Contacted customer service and the corrected the issue. I will continue to use this site.
1 A is A1
September 24, 2018
The service was excellent and I received my parts before the delivery date when I installed my replacement parts they were a spot on match thank you 1A I'll be ordering more parts very soon
1998 Camry CV axle replacement
October 1, 2018
Ordered both driver and passenger cv axles effortlessly from the website. Both axles arrived promptly. I had one axle that was damaged in shipping but after a quick call to customer service they had a replacement axle sent to me. Although it was a bit of an inconvenience the very helpful support I received more than made up for the delay. Would order again from this company without hesitation. Highly recommend.
CV Axles
December 9, 2018
Parts arrived just when said. The parts were put on my car and I have been rolling great. Thank you for the best price ever. No other auto parts store compare with your prices. Thank you so much.
2000 Camry Front End Rebuild
January 12, 2019
Bought ball joints, control arms, inner/outer tie rods, CV axles, hubs and bearings from 1AAuto. Very happy. All parts fit, sight unseen. Nothing more frustrating than being elbow deep in grease, hours into a project, only to find parts don't fit. 1A knows their stuff. Their prices are competitive, if not better than other competitors--they beat all the local guys like O'Reilly's and AutoZone. I even checked Rock Auto. Planned this project over a month. Better yet, their online videos are simply outstanding. They also have accompanying transcripts and tool lists based on the job right there with the video-and they even include torque settings. Great business model for the little guy that likes to do his own work and save a buck. 1A, I'll be back.
perfect fit
April 18, 2019
I was surprised by the quality and low price.
Cv axels
April 25, 2019
I am installing them tomorrow but they are a perfect match and even look beefier
1997 Toyota Avalon Struts
July 9, 2019
The shipment was really fast and installation easy. Given the price of this at a dealer or independent shop, my savings was at a fraction of the cost.
July 27, 2019
Axle shaft fits my car
Great product
October 22, 2019
The cv axles I purchased are great quality and have worked out pretty well. And they were a good price!
Envio completo y seguro
April 13, 2020
Llega bien enpacado y completo. Magnifica calidad y no tienes ningun problema.
Work great on my old 99 Camry
April 22, 2020
no problem so far about 25,000 miles in… Good luck product once again
CV axle
June 23, 2020
Worked perfectly, perfect fit
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who is the manufacture of these products?
March 29, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please don't hesitate to ask.
March 30, 2016
does this fits my 1997 toyota camry LE 2.2 automatic?
May 2, 2017
No, these are specific for 3.0L engines only.
May 2, 2017
What other parts do i need to do a cv joint replacement on a 2000 Toyota avalon?
July 25, 2017
In most cases, the CV axles are all that are needed, but in some cases based upon wear and other factors hub and bearings could be changed or other steering and suspension components.
July 25, 2017
i cant think of any other PARTS if you buy the complete shaft assembly etc. maybe a cpl of kotter pins incase they break off etc.
July 25, 2017
No you do not it pretty much comes with everything except your tools.
July 26, 2017
Does it come with the boots for the c.v axle?
November 3, 2017
I want to say yes it came with the boots. I had a friend put them on, so I can't say 100%, but he did not mention the lack of boots. When I had it first checked out the shop mentioned the boots needed replacing so I assume they were in the box.
November 3, 2017
yes... complete... ready to install
November 3, 2017
Yes, these will arrive ready to install with the boots preinstalled.
November 3, 2017
yes, all you do is take the old ones out but the new ones in everything's there excellent product!
November 4, 2017
November 4, 2017
November 4, 2017
Will this work on 2001 Lexus ES300 3.0L ??
September 28, 2020
I believe so. I purchased the driver and passenger cv axle shaft set for a 2003 Toyota Avalon, which shares a lot of the same parts as the es300.
September 28, 2020
Thank you for your inquiry. Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
September 28, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation. See all trademarks.

Toyota Lexus Driver & Passenger Side 2 Piece CV Axle Shaft Set TRQ CSA82461-1AACS00071 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1997 Toyota Avalon with these options.