Specifications:

  • Brand New Lighting Kit
  • Comes as a 2 Piece Kit
    • Fits RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (0:56)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To change just the headlight bulbs (0:57)
    • Pop the hood and secure.
    • Reach behind the headlight assembly
    • Twist and pull to remove the bulb.
    • Unclip bulb from the harness.
    • Reverse the process to install the new bulb.
  3. step : Remove the front grille. (2:20)
    • Lift the hood.
    • Remove the three Phillips screws securing the front grille.
    • Unclip the front grille and set aside.
  4. step : Remove the parking light assembly. (3:00)
    • Remove the one Phillips screw.
    • Pry out the parking light assembly
    • Unplug the bulb/harness.
  5. step : Remove the headlight assembly (3:40)
    • Unbolt the two nuts and 1 bolt securing the headlight assembly using your socket, ratchet and extension.
    • Unclip the harness.
  6. step : Install the new headlight assembly (4:45)
    • Plug the harness into the new head light assembly.
    • Line up the headlight assembly.
    • Bolt back in using your 10 mm socket, extension and ratchet.
  7. step : Install new parking light assembly (6:20)
    • Plug in bulbs and harness.
    • Line up and clip in parking light assembly.
    • Screw in the Phillips screw.
  8. step : Remount the front grille. (7:20)
    • Clip the front grille in.
    • Screw in the 3 Phillips screws.
    • Close hood.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993 Toyota Corolla 2 Wheel Drive 2 Piece Set Lighting Kit Passenger Side
  • 1994-1997 Toyota Corolla 2 Piece Set Lighting Kit Passenger Side

This part replaces:

  • TYC 20-1744-00-1
  • TYC 18-1920-00
  • Hollander 114-58337
  • OE # 81110-1E221
  • OE # 81610-12600
  • Partslink TO2503107
  • Partslink TO2551106
Part #: 1ALHT00056



How-to Video:

(08:12 min)