Toyota Camry Solara Rear Strut & Spring Assembly Pair TRQ SCA56957

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (1:14)
    • Pull off the hub cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:37)
    • Remove the 12mm bolt from the brake line
    • Remove the 10mm bolt from the ABS sensor
    • Pull the brake line off the strut
    • Pull the ABS sensor off the strut
    • Attach locking pliers to the upper sway bar ball joint
    • Remove the lower sway bar link nut with a 14mm socket and ratchet
    • Remove the sway bar link from the strut
    • Remove the two 19mm nuts and bolts that connect the strut to the wheel spindle
    • Lift the rear seat off its ancho points
    • Push the seat belts through the rear seat cushion
    • Pull the rear seat out through the door
    • Remove the 12mm bolt from each rear seat bolster
    • Pull out the rear seat bolsters
    • Pull the seatbelt aside
    • Pull back the sound-deadening material
    • Remove the three 12mm bolts from the top of the strut
    • Pull the strut down and out
  3. step : Installing the Strut (5:44)
    • Lift the strut into place, lining up the studs
    • Start the 13mm nuts onto the strut mount
    • Insert the 19mm bolts that connect the strut to the wheel spindle
    • Start the 19mm nuts onto the bolts
    • Tighten the 19mm nuts to 83 foot-pounds of torque
    • Put the ABS sensor bracket into place
    • Insert the 10mm bolt into the ABS sensor bracket
    • Put the brake line into place
    • Insert the 12mm bolt into the brake line bracket
    • Put the sway bar link into place
    • Attach locking pliers to the upper sway bar ball joint
    • Fasten the 14mm nut onto the sway bar link
  4. step : Reattaching the Wheel (7:31)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. step : Securing the Strut and Reinstalling the Rear Seat (8:08)
    • Fasten the three 13mm nuts onto the strut mount
    • Push the rear seat bolsters into place using the locating tabs
    • Insert the 12mm bolt into each rear seat bolster bracket
    • Push the rear seat cushion into place
    • Pull the seatbelts through the rear seat cushion
    • Pop in the seat cushion clips

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket
  • 12mm Socket
  • 13mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 14mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 13mm Wrench
  • 12mm Wrench

4.70/ 5.0
20 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
struts fit really well. all bolts matched up where they were supposed to. very pleased. will trade with 1A again.
February 8, 2017
Camery 99 rear stuarts
I bought from !A.Easy transaction .rep was great and helpful fitted well in my camery 99. working great and solve my problem. very reasonable price. item was shipped on time.
October 4, 2017
Awesome deal!
The parts ere delivered in a prompt, timely manner and the installation was as instructed in the video. I had already replaced the 2 front struts but it costed me $155 EACH at Advanced Auto Parts and the PAIR was considerably more affordable through your site @ $130 for the 2 struts. THANKS!! Johnny Hall
October 6, 2017
Great value
I had my struts installed and they perform great! Also they arrived in a timely manner.
February 13, 2018
I liked the quick service. The Quality and the price of the struts for the 1999 Toyota Camry were of good quality.
March 23, 2018
Parts and Service
The parts I ordered were shipped the next morning or day from the day I ordered them. A tracking number was provided. From time of ordering to the day I received the parts was only three days. impressive because they were shipped 1000 miles. Service great, shipping was included in the price of the parts. Here is the best part of the purchase. I was able to get all the struts for the car for same price I would have had to pay for two struts at O-Riley ($145.00 + tax) in Corpus Christi. Texas. That includes shipping. Amazing savings.
April 11, 2018
Struts for 2001 Camry
The struts were the right ones. They got here on time with a link to a video that walked me through the process. Excellent!!!
April 14, 2018
Great Stuff
I purchased struts for my 1999 Camry from 1A. Part quality was good and has made a huge difference in the vehicle ride. The “how to� videos these guys have are great. The go through step by step and add tips to make it easier to do. Glad I found these guys!
April 24, 2018
I only had one bad strut pack when I put these on, now I have two bad strut packs. I think you must have just repainted bad struts and resold them. Paid good money to have them installed, now I need new ones again.
August 1, 2018
Purchased struts
Was the best experience of on line shopping . Very awsome people to talk to and do business with. Very fast shipping .Ill be buying lots more from these awsome people!!!!
August 22, 2018
Good value
Product fit as advertised. No problems installing.
September 4, 2018
big improvement and pretty easy to install
I had never installed struts before. The video was extremely helpful. I had to buy some tools and use lots of spray penetrant, but I didnt break anything and the process was basically as described. This site is a terrific resource, I just saved a bundle of money vs paying my mechanic. The struts themselves are beefier (more spring coils) then the originals and the car feels much sturdier on the road. Thank you!
October 15, 2018
The rear struts work great
The video was great and made the job easy May do another project because this went well. Thanks
December 3, 2018
Great Strut & Spring Assembly for the Price
I would recommend this Strut & Spring Assembly pair. I have two suggestions: 1) Clearly mark which Strut & Spring Assembly is for the driver side and which is for the passenger side, 2) When ordered, attach the link for the "how to" video on 1A . The assembly are priced for affordability, and the car is riding like new; not bad for a 2000 year vehicle.
December 17, 2018
Perfect fit and i absolutely love the how to videos
March 23, 2019
My favorite site to find all the parts for my car
Great place to buy your car parts need I love it.Fast to deliver and very efficient.
April 23, 2019
A-1 Auto went out of the way to help me there video was very helpful all parts fit and was easy to install
June 11, 2019
Pretty good
Good for a replacement.
June 22, 2019
Worked great on my 1999 camry
Really easy to install, just followed the instructions on the video... Great quality... Very happy with my purchase...
January 6, 2020
Good buy great parts
I bought these for my 2001 Camry with 165,000 miles. Left OEM strut was broken. I ordered them on Thursday, they arrived Saturday, installed them on Sunday by myself using a floor jack ( and jack stands etc for safety). Reasonably easy. The A1 video was a big help. Not as easy as that super strong man in the video using left hand to push the strut upward into position and the right to start the upper mounting nuts, but using a second floor jack I push it up into position and start the upper mounting nuts. I used a breaker bar to loosen the lower mounting bolts. The only thing I would have done different was to buy new sway bar links (one each strut), they are not that expensive, and cut the old ones off. That goofy Toyota Allen wrench fitting in the bolt head wallows out trying to remove the mounting nut, so I had to use narrow jaw really tight vise grips between the bearing boot and the bracket, which probably damaged it (grease squeezed out), to hold the link stud so it would not turn while removing the mounting nut, which required a lot of force. The car rides firmer (I had already paid someone to replace the fronts) and back of the car doesn’t sag. These are good parts which fit perfectly!
January 6, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is alignment required after replacing the rear strut?
Chan C June 9, 2017
No, alignment is required checking the tread of the tires.
Martin F June 9, 2017
I did not have a alignment on my daughters 2000 camry, car goes perfectly straight and is not wearing tires that Ive noticed. check anti sway bar links might be worn out causing rattles, banging noises
Timm W June 9, 2017
Yes these vehicles require a 4 wheel alignment so you should have the vehicle aligned
JOHN W June 9, 2017
It is recommended to have the vehicle checked out after installation to ensure proper alignment. In some cases the vehicle alignment will not be altered after replacement.
Alex P June 9, 2017
No alignment is necessary. These are for the rear wheels.
Masood M June 9, 2017
Fit 2000 v6 Camry?
The K July 27, 2018
This part is not listed to fit your vehicle. We may have a part that is listed to fit! Please search our site using your vehicle info and then choose the appropriate category. All the parts we carry are guaranteed to fit the vehicle they are listed for. Thank you!
Jessica D July 27, 2018
How long will it take to level out after installing?
Joseph I December 2, 2019
New struts ARE level. I suspect you just got so used to the pitch f the car with the old ones that getting it properly level seems unlevel. That, or your other shocks/struts are so worn its make that end of car too low.
Brian Z December 2, 2019
Thank you for the inquiry. New struts will take a few weeks of driving on to level out. They may appear higher especially if you replaced the rear but not the front at the same time.
Christa R December 3, 2019

Fits the following Makes:

Year Make Model Description
1997-2001Toyota Camry Toyota Camry L4 2.2L Rear Strut & Spring Assembly Pair
1999-2003Toyota Solara Toyota Solara Rear Strut & Spring Assembly Pair

Part Interchange

Brand Label Part Number
Gabriel G56930
Gabriel G56931
KYB SR4030
KYB SR4029
KYB Shocks & Struts SR4029
KYB Shocks & Struts SR4030
Monroe 181680
Monroe 171681
Monroe 171678
Monroe 171680
Monroe 181681
Monroe 171679
Monroe Shocks & Struts 171679
Monroe Shocks & Struts 171678
Monroe Shocks & Struts 181681
Monroe Shocks & Struts 171680
Monroe Shocks & Struts 181680
Monroe Shocks & Struts 171681

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSP00004
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SCA56957