1ABDS00262-Toyota Camry Solara Rear Brake Shoe & Drum Kit


Toyota Camry Solara Rear Brake Shoe & Drum Kit TRQ


Part Details

  • Kit Includes: (1) Rear Brake Shoe Set
  • Kit Includes: (2) Rear Brake Drums

This part replaces:

  • TRQ BKA10468
Save 28%
List: $110.95 Save: $31.00
Part 1ABDS00262
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BKA10468

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Kit Includes:
      (1) Rear Brake Shoe Set
      (2) Rear Brake Drums

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:52)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Shoes (1:18)
    • Pull off the brake drum
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the retaining pin
    • Repeat the process for the other shoe
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
    • Remove the spring-loaded snap clip with a flat blade screwdriver
    • Remove the clip, spring, and brake adjustor
    • Pry off the horseshoe clip and remove the arm from the front brake shoe
  3. step : Installing the New Brake Shoes (6:51)
    • Spray the backing plate surface with brake cleaner
    • Spray the adjustor wheel and e-brake with brake cleaner
    • Insert the e-brake arm into the brake
    • Press on a new horseshoe clip
    • Clamp the horseshoe clip with pliers
    • Tighten down the brake adjustor
    • Place the adjustor into the spring
    • Insert the spring and adjustor to the shoe
    • Insert the adjustor arm into place
    • Snap the ring onto the adjuster arm
    • Reinstall the spring to the arm
    • Lift the brake shoe into place
    • Insert the e-brake spring to the brake shoe
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Adjust the shoes so they touch the surface of the drum
    • Hook the springs on with the vise grip pliers
    • Slide the brake drum on
  4. step : Reattaching the Wheel (13:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Align the notch with the valve stem, and reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this for 14 inch wheels?
David M September 7, 2020
I have 15 inch wheels.
M I September 7, 2020
Thank you for the inquiry. The fit of these is not dependent on your wheel size. We can confirm fit if you provide your 17 digit VIN number.
Christa R September 8, 2020

Fits the following Makes:

Year Make Model Description
1992-2003Toyota Camry Toyota Camry Rear Brake Shoe & Drum Kit
2004-2006Toyota Camry Toyota Camry (Japan Built Models (1st VIN Digit J)) Rear Brake Shoe & Drum Kit
1999-2003Toyota Solara Toyota Solara Rear Brake Shoe & Drum Kit

Part Interchange

Brand Label Part Number
Aimco 3534
Bendix PDR0581
DIY Solutions BFS00098
DuraGo BD3534
Raybestos Brakes 9728
Wagner BD125225

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BKA10468
Product Reviews
4.83/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great value!
I was able to get this part significantly cheaper than at any of the local auto parts stores and the shipping was much faster than I expected. I am happy with the purchase and would buy from these guys again.
August 2, 2017
rear drum brake kit
Purchased rear brake drum kit for 1998 Camry. Parts shipped right away. received in good shape. Installed with no problem. Everything works great. I would highly recommend purchasing parts from 1 A Auto. I have purchased other parts from them with similar results.
August 21, 2017
1aauto is excellent.
First 1a auto shipped on time, was quick to respond and was the best deal for this brake kit. Although the product did not perform as I liked. 1a auto made things right immediately when I contacted them about the drums in this kit. The drums in this kit had a loose tolerance compared to the original ones I removed from my 96 Camry. They were noticeably looser and it could be seen in the alignment of the 5 lugs. This caused the drum to seem out of round and caused the brakes to be hard to adjust. A rumble when braking.Would have given 5 stars to 1a but product was a disappointment. Going to put the old drums back.
November 27, 2018
Good quality aftermarket parts
First time purchasing 1AAuto parts, not disappointed. Drums and shoes are as expected, no complaints here!
March 21, 2019
Great parts!
Parts fit great and seem to be decent quality.
January 22, 2020
Reliability and functionality at its best
All items arrived on time in a box. And with audio visual aid from 1Aauto’s “how to� I replaced my parts with ease... thanks 1aauto.....
April 5, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Camry Solara Rear Brake Shoe & Drum Kit TRQ-1ABDS00262 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.