Toyota Camry Solara Front Strut & Spring Assembly Pair TRQ SCA56956

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:37)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (3:27)
    • Hold the sway bar link collar with vise grips
    • Remove the 14mm nut from the top of the sway bar link
    • Remove the vise grips
    • Pull the sway bar out of the strut
    • Remove the ABS sensor wire from the clip
    • Remove the 12mm bolt from the ABS sensor
    • Pull the sensor and brake line aside
    • Loosen the two 22mm nuts at the bottom of the strut
    • Tap the 22mm bolts loose with a hammer
    • Remove the 22mm nuts and bolts
    • Open the hood
    • Remove two of the three 14mm nuts from the top of the strut
    • Loosen the third 14mm nut
    • Support the strut as you remove the last 14mm nut
    • Pull the strut down and out
  3. step : Installing the Strut (7:52)
    • Lift the strut into place
    • Start the three 15mm nuts onto the bolts at the top of the strut
    • Tighten the 15mm nuts to 59 foot-pounds of torque
    • Make sure the steering wheel is straight
    • Line the spindle up with the strut
    • Place the two 22mm bolts into the bottom of the strut
    • Start the two 22mm nuts onto the bolts at the rear
    • Hold the nuts with a 22mm wrench
    • Tighten the bolts with a 22mm socket and ratchet
    • Tighten the 22mm nuts to 156 foot-pounds
    • Clip the brake line and abs wire into place
    • Insert the 12mm bolt into the ABS sensor bracket
    • Push the ABS sensor clip onto the wheel spindle
    • Fasten vice grips to the sway bar link collar
    • Put the sway bar link into the strut
    • Start the 14mm nut onto the sway bar link
    • Tighten the 14mm nut to 29 foot-pounds
    • Remove the vice grips
  4. step : Reattaching the Wheel (10:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 21mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 22mm Socket
  • 14mm Socket
  • 15mm Socket
  • 12mm Socket
  • 21mm Socket

4.88/ 5.0
17 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Strut installation on a 98 camry.
This might have been the easiest installation that Ive ever done on a car and Ive done a few!.Follow the video..and your golden!..took less than an hour for both sides on front!
February 21, 2017
These struts were a perfect replacement for my old, worn-out, rattling, bounce-bounce-bouncy struts. Once the car was jacked up and on jack stands, it took me only about 30 minutes per strut to remove and replace them. Took the car out for a test drive, and no more noises and no more bouncing. Awesome!! The 1A Auto installation video was perfect. I feel like I can do anything to my cars just by watching 1A Auto videos. Will buy all my Camry parts from 1A Auto in the future.
February 27, 2017
Perfect replacement
With the help from the 1A videos, I was able to replace my front struts with no problems.
June 18, 2017
Good product & service -- need stronger strap for box
I ordered the pair and only received one box, not realizing there should have been 2 boxes. Did not know that until I took to my mechanic and he said there was only one side. I called back and the customer care person was very apologetic, and took care of sending out a replacement piece right away, at not additional cost to me. She was very nice. She said the boxes are strapped together when shipped, and the strap must have broken. My only suggestion is that you put a stronger strap on the boxes! One box was heavy enough.
June 30, 2017
Perfect fit for my 1999 Camry
Fast delivery, perfect fit, raised the front 3 inches. Not scraping on driveway anymore. Not a rattle and clank sound crossing RR tracks. Great firm ride.
September 25, 2017
Perfect fit and installed runs no issue
I bought same parts from RockAuto, little more expensive, but not fit although the web site says will fit. Also RockAuto is very hard to return parts (no human rep no email address can mail since they want keep cost low), their return site is like SAT test, one check box wrong, you dead, no longer authorized to return ! So I switched to 1A-Auto since I watched its video, What a difference, The rep carefully reviewed my request and picked parts form me over the phone. Parts arrived quickly, better package, better color, perfect fit to detail. I changed both side in 2 hours, Ride smoothly, What you can ask for more !
December 20, 2017
easy to order and quick delivery
Their website is easy to navigate for proper items and easy to see if the part fits correct model of car. Quick delivery and reliable service and part
January 31, 2018
Fantastic Product from 1A Auto
This product from 1A Auto made R and R so easy my Grandson who hardly ever turned a wrench on an automobile did the job in less time than I did the last time I replaced the struts on my VW Golf. We watched the video on YouTube then got into it. The Ride in his 1998 Toyota Camry is as new. Thanks 1A Auto.
February 15, 2018
Quality parts
Fast shipping on quality parts. The right part the first time. No issues. Items came with return labels if I needed them but I did not. Thanks again
June 16, 2018
high quality and great ride
I recently purchased these struts for my 2001 camry, first off I was totally pleased with the cost. when I received the struts I was very impressed with the quality of the parts, and I can also add that after install which was a breeze the ride quality was just as good and quite probably better than the OE struts.Ii will have absolutely no reservations going to 1A for whatever parts I may need in the future. and the fact that they have a customer service phone number is a big and important plus. If I could....6 stars
June 19, 2018
Review of Delivery
Just received parts yesterday delivered via UPS. The one box with Rotors and brake pads was completely open however looks like parts are all there.
August 15, 2018
Easy install
Struts were very easy and safe to install and seem to be performing well. I will have to replace rear struts before I can tell for sure
September 19, 2018
Identical match to the OEM parts! I definitely recommend 1AAuto to any and everyone. Im one satisfied customer!
November 8, 2018
fast delivery, easy installation, & how to videos! i have yet to find anything wrong with any of the parts ive purchased from here
November 16, 2018
Great product
I would recommend this product. Almost 1 month now and it rides great.
March 25, 2019
Always great
I have ordered many time at 1A auto and never have I had a problem. My shocks came at the time specified and they fit perfect. I save money every time and my mechanic always relies on the parts will be exact fit. Thanks for your help as I know your sales reps will be helpful in anything I ask. I truly recommend 1A auto confidently
January 11, 2020
Video and Purchase
I am not a mechanic but after viewing your videos I was able to put struts and sway bars on my car and enjoyed the feeling of doing it myself. I have plans to do some more projects and will watch the training videos and purchase my parts from you. Thank you.
January 31, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
how do i get replacement hardware if necessary? Does not seem to come equipped, dont want to be sol.
D T February 2, 2016
Mine came complete with everything, the guy simply swapped the old ones for the new ones...they were also compressed already as well. Great deal...
Marc S February 2, 2016
Purchased for son who lives 110 miles from me. I dont know possible need for additional hardware. If there was a need it wouldnt have been expensive because I wasnt contacted. Wish you luck.
Earl H February 3, 2016
Factory hardware for the lower knuckle should be reused. The upper nuts should come with the struts. No additional parts needed.
Brian F February 3, 2016

Fits the following Makes:

Year Make Model Description
1997-2001Toyota Camry Toyota Camry L4 2.2L Front Strut & Spring Assembly Pair
1999-2003Toyota Solara Toyota Solara L4 2.2L Front Strut & Spring Assembly Pair

Part Interchange

Brand Label Part Number
Gabriel G56930
Gabriel G56931
KYB SR4029
KYB SR4030
KYB Shocks & Struts SR4030
KYB Shocks & Struts SR4029
Monroe 171679
Monroe 181679
Monroe 171678
Monroe 181678
Monroe Shocks & Struts 181679
Monroe Shocks & Struts 171679
Monroe Shocks & Struts 181678
Monroe Shocks & Struts 171678

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSP00003
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SCA56956