• Brand New, Not Remanufactured Alternator
  • 80 Amps
  • No core charge
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
This replacement alternator is just what you need to get your vehicle in good working order again. If your battery is no longer being charged completely, or at all, this alternator may be the solution for you.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Part Details

  • Voltage / Wattage / Amperage Rating: 80 Amp

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Serpentine Belt (0:37)
    • Loosen the negative battery terminal with a 10mm wrench
    • Remove and isolate the terminal
    • Loosen the 14mm bolt that mounts the alternator to the engine
    • Loosen the 12mm bolt underneath the adjusting screw
    • Turn the adjusting screw counterclockwise to drop the belt
    • Familiarize yourself with the route of the serpentine belt
    • Pull the belt off the alternator
    • Release the tensioner
    • Pull the belt off by hand
  2. step : Installing the Alternator (5:20)
    • Remove the 8mm nut from the retainer and transfer it to the new one if needed
    • Insert the alternator into the bracket
    • Hand-tighten the 14mm bolt
    • Hand-tighten the 12mm adjusting screw
    • Do not tighten them all the way
    • Press the wiring harness onto the bracket
    • Connect the wiring harness
    • Insert the terminal wire into place
    • Tighten the 10mm bolt to the terminal wire
    • Replace the terminal wire cover
  3. step : Removing the Alternator (7:26)
    • Pry off the alternator terminal cap
    • Make sure the battery is disconnected
    • Remove the 10mm nut
    • Pry out the wiring harness from the alternator
    • Move the wiring harness out of the way
    • Remove the 12mm bolt from the back of the adjustor
    • Remove the 14mm bolt that mounts the alternator
    • Work the alternator out of the pivot bracket by hand or with a small pry bar
  4. step : Installing the Serpentine Belt (2:41)
    • Loop the belt around the crank pulley
    • Bring it under the A/C compressor
    • Pull the belt over the alternator
    • Loosen the adjustor if needed
    • Tighten the 12mm adjustor bolt clockwise
    • Tighten the 12mm bolt beneath the adjustor bolt
    • Tighten the 14mm bolt that mounts the alternator to the engine
    • Reconnect the 10mm negative battery terminal
    • Start the vehicle and listen for slipping or squeaking

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket
  • 14mm Socket
  • 12mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Really good....
The alternator went out on my 2001 Toyota Solara. The ones the auto stores had were a higher amperage (90 or 100 amps) than the original (80 amps) and many were reconditioned. Plus they charged extra until you returned the core (the one you jut replaced). This one was the same amps, brand new, and did not require returning the replaced unit. Plus it was cheaper. All around a win-win situation. Will definitely buy from 1A again...
September 25, 2017
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1994-1996Toyota Camry Toyota Camry 80 Amp Alternator with Oval Plug L4 2.2L
1997-2001Toyota Camry Toyota Camry 80 Amp Alternator L4 2.2L
1996-2000Toyota Rav4 Toyota Rav4 80 Amp Alternator L4 2.0L
1999-2001Toyota Solara Toyota Solara 80 Amp Alternator L4 2.2L

This part replaces:

  • OE # 2706074590
  • OE # 2706003060
  • Hollander 601-58692
  • Lester 13557
  • Hollander 601-58460D
  • Hollander 601-58760
  • Lester 13754
  • TYC 2-13754
Part #: 1AEAL00467

Out of Stock

How-to Video:

(09:09 min)