1AWWR00169-Toyota Camry Lexus ES350 Windshield Washer Reservoir


Toyota Camry Lexus ES350 Windshield Washer Reservoir DIY Solutions


Part Details

  • Includes: Washer Pump

This part replaces:

  • DIY Solutions WIP00222
Save 33%
List: $89.95 Save: $30.00
Part 1AWWR00169
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: WIP00222

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Washer Pump

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Front Bumper (0:24)
    • Place tape along the edge of the bumper to mark its location
    • Remove the 10mm bolts from the splash shield
    • Remove the splash shields
    • Turn the clip in the fender liner on either side
    • Pull back the fender liner
    • Remove the 10mm bolt from the bumper on either side
    • Remove the 10mm bolt from the metal support on top of the bumper
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Remove the Phillips retainer from the bracket
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Pull the bumper off of the bracket
  2. step : Removing the Washer Fluid Pump (6:15)
    • Turn the wheel out
    • Remove the 10mm bolt from the fender liner to gain access
    • Have a drain pan ready
    • Disconnect the sensor from the pump
    • Remove the pump
  3. step : Removing the Overflow Bottle (7:13)
    • Disconnect the level sensor
    • Pry the wires out of the bottle
    • Remove the three 10mm bolts from the bottle
    • Pry the level sensor out with a flat blade screwdriver
  4. step : Installing the Overflow Bottle (8:15)
    • Remove the rubber seal from the sensor
    • Press the sensor seal into the new bottle
    • Insert the tank up into place
    • Tighten the 10mm bolts to the bottle
  5. step : Installing the Washer Fluid Pump (9:24)
    • Connect the level sensor
    • Connect the hose to the pump
    • Press the grommet into the tank
    • Press the pump into the tank
    • Connect the sensor
    • Connect the splash shield
    • Tighten the 10mm bolt to the splash shield
  6. step : Installing the Front Bumper (10:24)
    • Hang the bumper on the top brackets
    • Push the bumper into the bracket on both sides
    • Press in the push clips to the headlights
    • Tighten the Phillips retainers to the metal bracket
    • Press in the clips to the bumper
    • Tighten the screw to the bumper behind the fender liner on both sides
    • Replace the splash shield
    • Tighten the 10mm bolts to the splash shield
  7. step : Refilling the Washer Fluid (13:00)
    • Open the washer fluid cap
    • Fill the washer fluid bottle
    • Close the cap

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2012Lexus ES350 Lexus ES350 with Low Fluid Sensor Windshield Washer Reservoir
2007-2011Toyota Camry Toyota Camry with Low Fluid Sensor Windshield Washer Reservoir

Part Interchange

Brand Label Part Number
DIY Solutions WIP00222

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: WIP00222
Product Reviews
There are no reviews for this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Toyota Camry Lexus ES350 Windshield Washer Reservoir DIY Solutions-1AWWR00169 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.