Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Brand New Headlights
  • Fits RH (Passenger Side)
  • Direct replacement
  • Direct replacements for halogen style headlights
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Front Bumper (0:24)
    • Place tape along the edge of the bumper to mark its location
    • Remove the 10mm bolts from the splash shield
    • Remove the splash shields
    • Turn the clip in the fender liner on either side
    • Pull back the fender liner
    • Remove the 10mm bolt from the bumper on either side
    • Remove the 10mm bolt from the metal support on top of the bumper
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Remove the Phillips retainer from the bracket
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Pull the bumper off of the bracket
  2. step : Removing the Headlight (6:19)
    • Remove the 10mm bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the headlight wiring harness
  3. step : Servicing the Bulbs (9:38)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  4. step : Installing the New Headlight (11:10)
    • Reconnect the wiring harness to the headlight
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts and grommets into the headlight bracket
  5. step : Installing the Front Bumper (13:08)
    • Hang the bumper on the top brackets
    • Push the bumper into the bracket on both sides
    • Press in the push clips to the headlights
    • Tighten the Phillips retainers to the metal bracket
    • Press in the clips to the bumper
    • Tighten the screw to the bumper behind the fender liner on both sides
    • Replace the splash shield
    • Tighten the 10mm bolts to the splash shield

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
replacement headlight assembly
arrived quickly in great condition, perfect replacement for car. Highly recommended.
August 30, 2017
Headlight for Camry
Excellent product. Impressed with how the transaction and shipping was handled. All arrived as stated. Video helped a lot in easy installation. Well done.
April 19, 2018
Not really and "exact" fit
Although this headlight had all of the same tabs and screws as in the same place as the original headlight, it was not really an "exact" fit as the original. I had a very hard time getting the two anchor points lined up in order to screw it in to the mount. When I had the top one aligned, the bottom would pop out and vice versa. I ended up having to start the screw on the top mounting bracket, and then forcibly jam the bottom screw in to place thus stressing the headlight and the tabs that hold it in place and then drive the two screws (top, bottom) home. Not too happy about that.
November 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Toyota Camry Toyota Camry (excluding Hybrid Models) LE (US Built Models) Headlight Passenger Side
2007-2008Toyota Camry Toyota Camry CE (excluding Hybrid Models) (US Built Models) Headlight Passenger Side
2007-2009Toyota Camry Toyota Camry (excluding Hybrid Models) XLE (US Built Models) Headlight Passenger Side
2009Toyota Camry Toyota Camry Base Model (excluding Hybrid Models) (US Built Models) Headlight Passenger Side
Part #: 1ALHL01458


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(17:26 min)