Replaces

Toyota Camry Corolla Solara Fog / Driving Light Pair - 1ALFP00073

This pair of fog driving lights is just what you need to get your Toyota Camry or Solara in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog lights
  • Fog lights do not include bulbs or wiring

This pair of Camry or Solara fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the front bumper cover (0:50)
    • Remove the ten screws and three push clips securing the bumper cover.
    • Starting from the sides pull out and unclip the bumper cover.
    • Unplug the wiring harness from the fog lights.
  2. step : Remove the fog light (2:12)
    • Remove the ground effect by removing the three tabs around the fog light.
    • Push out the silver tabs with your flat blade screwdriver
    • Set the ground effect aside.
    • Unclip the fog light.
  3. step : Install the new fog light (3:38)
    • Clip the fog light in place.
    • Replace the ground effect, clipping it in.
    • Anchor with the three blue clips.
  4. step : Put the bumper cover back on (4:41)
    • Plug in the wiring harness to the fog lights
    • Clip the bumper cover on, starting at the edges.
    • Secure with the ten Phillips screws and three push clips.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
New Customer
This is my first order with 1A Auto. I'm very happy with my order. When I received my order, I was pleased to see the the fog lamps was in individual packing boxes. I was also pleased that the company had a video to show how to install the fog lamps.
October 27, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What brand are these lamps? Also, country of manufacture?
P D on Sep 15, 2017
BEST ANSWER: These are our 1A Auto brand lamps, and built overseas to meet or exceed OE specifications.

Vehicle Fit

  • 2002-2004 Toyota Camry Fog / Driving Light Pair
  • 2004 Toyota Corolla Fog / Driving Light Pair (Built After 4/04 Production Date)
  • 2005-2008 Toyota Corolla Fog / Driving Light Pair
  • 2002-2003 Toyota Solara Fog / Driving Light Pair

This part replaces:

  • OE # 81210AA010
  • OE # 81220AA010
  • Partslink TO2593106, TO2592106
Part #: 1ALFP00073

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:42 min)