1ASFK06444-Toyota Avalon Camry Lexus ES350 Rear 4 Piece Strut & Spring Assembly Set

Replaces

Toyota Avalon Camry Lexus ES350 Rear 4 Piece Strut & Spring Assembly Set TRQ SCA66211

1ASFK06444
FREE SAME DAY SHIPPING
Save 18%
List: $280.95 Save: $51.00
Part 1ASFK06444
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA66211

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Sway Bar Links
  • Set Quantity:   4 Piece

Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount.  Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut
No modifications, all the parts needed in one kit
Easy install - Pre-assembled, loaded struts
No specialty tools required

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with a 21mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Ball Joint (1:12)
    • Apply rust penetrant to the ball joint nuts and bolt
    • Loosen the two ball joint nuts with a 17mm socket and breaker bar
    • Loosen the ball joint bolt with a 17mm socket and breaker bar
    • Remove the cotter pin from the ball joint castle nut with needle nose pliers and side cutters
    • Drive the cotter pin out of the castle nut with a hammer and punch
    • Loosen the castle nut with a 19mm wrench and a dead blow hammer
    • Strike the wheel knuckle with a small sledge hammer
    • Remove the two 17mm nuts from the ball joint
    • Remove the 17mm bolt from the ball joint
    • Separate the ball joint from the control arm
    • Pry the ball joint out of the wheel knuckle with a pry bar
    • Remove the castle nut from the ball joint
    • Pull the ball joint out of the wheel knuckle
  3. step : Installing the Ball Joint (6:42)
    • Remove the cotter pin and castle nut from the new ball joint
    • Clean any grease from the wheel knuckle
    • Slide the ball joint into the wheel knuckle
    • Start the castle nut onto the ball joint by hand
    • Slide the ball joint studs into the control arm
    • Start the two 19mm nuts onto the ball joint studs by hand
    • Start the 17mm bolt into the control arm
    • Tighten the castle nut with a 19mm wrench
    • Line up the castle nut with the cotter pin hole
    • Insert the cotter pin into its hole
    • Fold over the cotter pin with pliers
    • Tighten the 17mm bolt
    • Tighten the two 19mm nuts to 55 foot-pounds of torque
  4. step : Installing the Wheel (9:32)
    • Slide the wheel onto the hub
    • Start the lug nuts with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel
    • Pump the brake pedal until it feels firm

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Sledge Hammer
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Ball Joint Press
  • Dead Blow Hammer

  • Wrenches - Metric

  • 19mm Wrench


Fits the following Makes:

Year Make Model Description
2007-2012Lexus ES350 Lexus ES350 Rear 4 Piece Strut & Spring Assembly Set
2006Toyota Avalon Toyota Avalon (Built After 12/05 Production Date) Rear 4 Piece Strut & Spring Assembly Set
2007-2012Toyota Avalon Toyota Avalon Rear 4 Piece Strut & Spring Assembly Set
2007-2011Toyota Camry Toyota Camry Rear 4 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
Beck / Arnley 101-6826
Beck/Arnley 101-6826
DIY Solutions SHO00517
DIY Solutions SUS06775
KYB SR4263
KYB SR4113
KYB SR4264
KYB SR4112
KYB Shocks & Struts SR4263
KYB Shocks & Struts SR4112
KYB Shocks & Struts SR4264
KYB Shocks & Struts SR4113
MOOG K750011
MOOG Chassis Products K750011
Mevotech MS86837
Monroe 172309
Monroe 172310
Monroe Shocks & Struts 172309
Monroe Shocks & Struts 172310
Unity Automotive 15362
Unity Automotive 15361

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: SCA66211
Product Reviews
5.00/ 5.0 3
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Excellent
March 19, 2020
Easy to order and quick delivery thank you so much.
Great bolt in replacement
June 24, 2020
Fit perfectly. Bolted right in only took about 1 hr with car on the lift.
Fit exactly
August 27, 2020
The struts arrived a day early and fit perfectly. After several weeks they're handling great. No issues at all.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
is this made in the USA?
May 9, 2020
10
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. Please let us know if you have any other questions.
May 10, 2020
Hi do you ship to P.R?
May 15, 2020
10
Thank you for your inquiry. We do ship a large majority of the parts we carry to Puerto Rico for an additional shipping fee. All fees and estimated delivery dates will populate at the checkout screen when your shipping information is entered. Please let us know if you have any further questions.
May 15, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Avalon Camry Lexus ES350 Rear 4 Piece Strut & Spring Assembly Set TRQ SCA66211-1ASFK06444 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.