1ASFK02785-Toyota Avalon Camry Lexus ES300 Inner & Outer Tie Rod

Replaces

Toyota Avalon Camry Lexus ES300 Inner & Outer Tie Rod TRQ

1ASFK02785

Part Details

  • Includes: Rack & Pinion Bellows

This part replaces:

  • Beck Arnley 103-2695
  • Moog K9877
  • Moog EV301
  • Moog ES3306
  • OE # 88910838
  • OE # 4553533010
  • OE # 4550329355
  • OE # 4550339135
  • OE # 4504629255
  • TRQ PSA55186
FREE SAME DAY SHIPPING
Save 26%
List: $61.95 Save: $16.00
Part 1ASFK02785
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA55186

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Includes:   Rack & Pinion Bellows

Specifications:

  • Brand New Tie Rod Kit
  • Comes as Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (3:45)
    • Turn the wheel by hand to check for play in the tie rod
    • Check for a gap in movement between the tie rod and spindle
    • Listen for a clunking sound from the tie rod
    • Measure the distance from the steering rack bellow to the lock nut
    • Record this measurement
    • Alternatively, mark the inner tie rod threads against the lock nut with a marker
    • Straighten out the cotter pin with needle nose pliers
    • Pull the cotter pin out of the castle nut
    • Loosen the castle nut from the tie rod with a 17mm socket and ratchet
    • Apply penetrating oil to the lock nut
    • Loosen the lock nut with a 22mm wrench
    • Tap the tie rod loose from the spindle with a hammer
    • Remove the castle nut
    • Tap the tie rod out of the spindle
    • Hold the inner tie rod with a 14mm wrench if necessary
    • Twist the outer tie rod off the inner tie rod with a 19mm wrench
    • Twist off the lock nut by hand
  3. step : Installing the Outer Tie Rod (8:07)
    • If you marked the inner tie rod, spin the lock nut to match the paint line
    • If you took a measurement, spin the lock nut to the correct distance from the steering bellow
    • Spin the outer tie rod onto the inner tie rod until it reaches the lock nut
    • Push the tie rod stud into the wheel spindle
    • Torque the tie rod nut to 36 foot-pounds
    • Install the new cotter pin with the longer leg facing down
    • Bend the cotter pin under the nut with pliers
    • Turn the inner tie rod with a 14mm wrench if it needs to be adjusted
    • Hold the inner tie rod with a 14mm wrench
    • Tighten the lock nut with a 22mm wrench
  4. step : Reattaching the Wheel (11:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 14mm Wrench
  • 19mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
any additional parts to complete installation ? This assembly is all I need to complete task ? ball joints ?
Ruben R March 8, 2019
This will be enough to replace your inner tie rods, outer tie rods and your rack and pinion bellows. If you are looking to get ball joints, we may carry them for your vehicle. Please take another look at the website to see what suspension kits we have available with more parts.
Ian P March 8, 2019
No additional parts were needed when I did it
M R March 8, 2019

Fits the following Makes:

Year Make Model Description
1992-1996Lexus ES300 Lexus ES300 Inner & Outer Tie Rod
1995-1996Toyota Avalon Toyota Avalon Inner & Outer Tie Rod
1992-1996Toyota Camry Toyota Camry Inner & Outer Tie Rod

Part Interchange

Brand Label Part Number
Beck / Arnley 103-2695
Beck/Arnley 103-2695
DIY Solutions SUS02336
DIY Solutions SUS07382
DIY Solutions SUS07402
General Motors 88910838
MOOG EV301
MOOG K9877
MOOG ES3306
MOOG Chassis Products ES3306
MOOG Chassis Products K9877
MOOG Chassis Products EV301

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA55186
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great value
Great value and fast shipping.
April 16, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Avalon Camry Lexus ES300 Inner & Outer Tie Rod TRQ-1ASFK02785 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.