Specifications:

  • Includes:
    • (2) Timing Chains - 122 Link
    • (1) Left Tensioner - Plastic body style
    • (1) Right Tensioner - Plastic body style
    • (1) Left Tensioner Guide Rail
    • (1) Right Tensioner Guide Rail
    • (1) Left Fixed Guide Rail
    • (1) Right Fixed Guide Rail
    • (1) Crank Sprocket - Double row
    • (2) Cam Sprockets
    • (1) Water Pump

 

Please note: This timing set is designed for the professional installer.  The factory installation procedures must be followed unless otherwise noted. 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Drain the Radiator (2:21)
    • Put a catch pan under the radiator
    • Use a wrench to open the valve and drain the radiator
    • Replace the cap
    • Put the catch pan under the middle front of the engine
  2. step : Remove the Serpentine Belt (2:57)
    • Insert the ratchet into the tensioner
    • Push clockwise on the tensioner and remove the belt from the alternator
    • Slowly release back on the tensioner
    • Remove the belt from the water pump pulley and set it aside
  3. step : Remove the Cooling Fan (4:18)
    • Place a belt wrench on the cooling fan pulley
    • Use an adjustable wrench on the large bolt holding the fan
    • Remove the fan
  4. step : Removing the Water Pump (5:29)
    • Place the belt wrench on the water pump pulley
    • Remove the four 10mm bolts securing the pulley
    • Use a flat blade screwdriver to pry from the back of the water pump pulley. Turn it and continue to pry till it comes off
    • Remove the four 10mm bolts securing the water pump
    • Use a hammer to hit the side of the water pump shaft. When it starts to separate use a flat blade screwdriver to help get the pump free
    • Use a sponge and wire brush to clean up the area
  5. step : Installing the New Water Pump (8:12)
    • Put penetrating oil on the water pump
    • Line it up and push it into place
    • Replace the four 10mm bolts. Hand tighten each of them and work your way around. Tighten incrementally. Then tighten them to 19ft/lbs
    • Replace the pulley and replace the four 10mm bolts. Tighten to 20ft/lbs
    • Turn the cooling fan back in to place and replace the bolt
    • Replace the belt around the crankshaft
    • Loosen the tensioner
    • Put the belt over the alternator
    • Tighten the tensioner
    • Make sure the belt is properly in place
  6. step : Refilling the Antifreeze (12:04)
    • Fill the truck back up with antifreeze
    • Start the vehicle to circulate the antifreeze
    • Fill the antifreeze back to the line
    • Drive the vehicle
    • Let it cool then fill to the line again

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Sponge

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Belt Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Ford Expedition Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5)
  • 2010 Ford F150 Truck Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5) or (8th Vin Digit V)
  • 2006-2010 Ford F250 Super Duty Truck Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5)
  • 2005-2010 Ford F350 Super Duty Truck Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5)
  • 2006-2008 Lincoln Mark LT Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5)
  • 2005-2010 Lincoln Navigator Timing Chain Set with Water Pump V8 5.4L (8th Vin Digit 5)
Only 5 left in stock
Part #: 1ATBK00170



How-to Video:

(14:09 min)