• Brand New Temperature Blend Door Actuator
  • Controls the temperature of air in the interior of the vehicle
  • Direct fit replacement
  • Correct for vehicles with manual A/C Controls ONLY

Fit and Installation


This part is designed to replace the factory vent door actuator with no modification. Removing and replacing a vent door actuator is generally a repair that can be done by the customer. We have the same part but at a fraction of the cost from a mechanic or the dealer.

The Correct Fix

The vent door actuator is the electric motor that moves the door in your heating and air conditioning system to direct the air out of the different vents. These parts wear out over time because they are used so often. They are usually located down in the foot well of the vehicle or under the dash. This part will mount the same way and all the electrical connections will be the same. You will save money in the long run.


Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Blend door
It works great. The hard part was the install of the bolts on the unit. You will definitely have to get those ratcheting wrenches to fit back in those tight spots.
May 31, 2018
1 year ago
2005 Ford Explorer XLT V8 4.6
This part was a pain to get in but once in place it works great. 1A has great technical help if you have problems.
July 31, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
No heat on floor, good air flow at other settings, does blend door actuator control this issue?
Ken O on Dec 20, 2016
BEST ANSWER: When you are experiencing a lack of heat coming from one piece of the vents (in this case being the floor), the most common issue would be that you need to replace the vent mode actuator which controls the direction of which vent(s) are pushing through heat or HVAC.

Vehicle Fit

  • 2003-2006 Ford Expedition with Manual Air Conditioning Temperature Blend Door Actuator
  • 2002-2010 Ford Explorer with Manual Air Conditioning Temperature Blend Door Actuator
  • 2002-2010 Ford Explorer Sport Trac with Manual Air Conditioning Temperature Blend Door Actuator
  • 2002-2010 Mercury Mountaineer with Manual Air Conditioning Temperature Blend Door Actuator

This part replaces:

  • OE # YH1744
  • OE # 1L2H19E616CD
  • OE # 1L2Z19E616CA
  • Dorman 604-209
Part #: 1AHCX00284

Order must be placed by 4pm ET