This replacement tailgate handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Textured Black Finish
  • Replaces dealer part numbers: 97319416, 25801998
  • Direct replacement for original handle
  • Has provision for lock cylinder
    • Lock cylinder not included (buyer will need to reuse original lock cylinder)

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Inner Tailgate Liner Protector (0:39)
    • Pry up any trim buttons on the liner with a flat blade screwdriver
    • Remove the Phillips screws from the liner
    • Remove the liner
  2. step : Removing the Tailgate Handle (1:25)
    • Pry up the panel on the inner part of the tailgate with a flat blade screwdriver
    • Unclip the latches from the tailgate handle rods
    • Remove the two 10mm bolts from the tailgate handle
    • Remove the tailgate handle
  3. step : Preparing the Tailgate Handle (3:08)
    • Remove the lock bolt and lock mechanism
    • Transfer the lock to the new tailgate handle
    • Tighten the handle with a 10mm socket and ratchet
    • Insert adhesive to the bolt holes on the tailgate handle
    • Push on the grommets to the bolt holes
  4. step : Installing the Tailgate Handle (4:32)
    • Insert the handle into place
    • Insert and tighten the 10mm bolts to the tailgate handle
    • Connect the latches to the tailgate handle rods
    • Spray the hinges with rust penetrant
    • Test the tailgate handle
  5. step : Installing the Inner Tailgate Liner Protector (6:27)
    • Insert the panel on the inner part of the tailgate
    • Push the liner into place
    • Insert the Phillips screw into the liner
    • Push on the trim buttons to the liner

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Gasket Adhesive

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.6 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
22
3
2
1
0
Chevy tail gate handle
This latch is the same as the factory part. It was easy to replace after watching the video, and was at my door in just a couple of days. Also the price was almost as low as the local salvage yard. What else would you want?
May 31, 2018
Purchased
1 month ago
tailgate handle
your product was just perfect. works great and easy to install.
April 15, 2018
Purchased
3 months ago
Made Cheap
I would have been alright with the quality But ,
one end of the handle return spring was not shaped properly, thus it cannot help pull handle back into position. QC problem?
March 15, 2018
Purchased
3 months ago
TAILGATE LATCH AND HEADLIGHT
I ORERED THE TAILGATE LATCH AND ALSO HEADLIGHT
THEY CAME IN A REASONAL TIME WITHOUT
ANY PROBLEM .BOTH INSTALLED EASY.THANKS ALOT
February 24, 2018
Purchased
4 months ago
Excellent replacement
This handle is an excellent replacement for a broken oem part. It cost 1/5 that of a dealer replacement part. Quality and fit are great. The on-line "how to" installation video was very helpful and work was done in less than 10 minutes. Works great!
February 18, 2018
Purchased
4 months ago
Tail gate handle for Colorado
Quick delivery and good fit. This is about the fourth handle I have had to change as they are made out of plastic and keep breaking in the same place. I have had good service with 1aauto and will use them for other parts for my Colorado.
February 7, 2018
Purchased
4 months ago
Pefect Fit - Installation video made install easy!
The part was a perfect fit for my vehicle. I watched the installation video once before ordering the part to make sure it was within my capability and I had the correct tools. Reviewed video once again before installing which made the installation quick and easy.
January 17, 2018
Purchased
5 months ago
Perfect Replacement
Part was delivered earlier than expected and replaced the handle within 10 minutes after watching the how-to video. Tailgate opens and closes with no problems. Thank you!!
January 17, 2018
Purchased
5 months ago
Happy with the part
The tailgate handle was just like the oem part. I installed it in about 15 minutes. Your cost was a lot less than what the dealer wanted.
January 5, 2018
Purchased
6 months ago
Easy replacement
This replacement handle was very easy to install, just as advertised. The video walks you through the process.
December 30, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 8 answers
Does this part include lock & keys?
Rick J on Nov 18, 2016
BEST ANSWER: You will have to reuse the cylinder from the old handle. It is easy to remove and install on the new handle. You can order the handle either with or without provision for a cylinder.
Is this an aftermarket handle or OEM?
gadams on Nov 25, 2016
BEST ANSWER: aftermarket

Vehicle Fit

  • 2004-2012 Chevy Colorado Textured Black Tailgate Handle with Lock Provision
  • 2004-2012 GMC Canyon Textured Black Tailgate Handle with Lock Provision
  • 2006 Isuzu i-280 Textured Black Tailgate Handle with Lock Provision
  • 2007-2008 Isuzu i-290 Textured Black Tailgate Handle with Lock Provision
  • 2006 Isuzu i-350 Textured Black Tailgate Handle with Lock Provision
  • 2007-2008 Isuzu i-370 Textured Black Tailgate Handle with Lock Provision

This part replaces:

  • OE # 25801998
  • OE # 97319416
  • Dorman 80584
Part #: 1ABTH00061

How-to Video:

(07:07 min)