Specifications:

  • Brand New Sway Bar End Link
  • Fits LH (Driver Side) or RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:28)
    • Apply rust penetrant to the sway bar link
    • Allow the rust penetrant to soak in
    • Remove the 15mm nut from the top of the sway bar link
    • Remove the top sway bar bushing with locking pliers
    • Hold the sway bar link sleeve with locking pliers
    • Remove the 16mm nut from the bottom of the sway bar link
    • Remove the bushing from the tip of the sway bar link
    • Drive the link out of the sleeve with a hammer and punch
  3. step : Installing the Sway Bar Link (4:41)
    • Support the control arm underneath the strut with a jack
    • Thread a washer onto the sway bar link
    • Thread a bushing onto the sway bar link
    • Thread the sway bar link through the control arm
    • Thread a bushing onto the sway bar link
    • Thread a washer onto the sway bar link
    • Slide the sleeve onto the control arm
    • Thread a washer onto the sway bar link
    • Thread a bushing onto the sway bar link
    • Thread the sway bar link into the sway bar
    • Drive the sway bar link through the sleeve with a hammer and socket
    • Thread a bushing onto the sway bar link
    • Thread a washer onto the sway bar link
    • Set the suspension to ride height with the jack
    • Tighten the 15mm nut and bolt
    • Tighten the nut to 22 foot-pounds of torque
    • Lower the jack
  4. step : Installing the Wheel (6:45)
    • Slide on the wheel
    • Start the five lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 16mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
what is the length of the Sway bar Link?
Ronald on Oct 12, 2017
BEST ANSWER: I don't have the exact measurements. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.

How-to Video:

(07:32 min)

Tools List:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 16mm Socket
  • 15mm Socket



This part replaces:

  • Moog K80898
  • OE # 6L2Z5K484BA

Vehicle Fit

  • 2006-2010 Ford Explorer Rear Sway Bar Link Driver or Passenger Side
  • 2007-2010 Ford Explorer Sport Trac Rear Sway Bar Link Driver or Passenger Side
  • 2006-2010 Mercury Mountaineer Rear Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00487

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More