Specifications:

  • Brand New Sway Bar Link
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    If you're just replacing one sway bar link, you'll need to disconnect the bottom of the opposite side after loosening We recommend replacing these in pairs

  1. step : Removing the Sway Bar Link (0:33)
    • Raise and secure the vehicle on jack stands
    • Shoot the threads with rust penetrant
    • Hold the 15mm hex with a 15mm wrench
    • Remove the bolt from the top with a 17mm deep socket and ratchet
    • Insert an 18mm wrench onto the bottom hex bolt
    • Remove the 18mm nut with an 18mm six-point socket and ratchet
    • Remove the lower nut
    • Repeat the process for the opposite lower end
    • Push your sway bar up and remove the links
    • If the sway bar won't budge, loosen the bracket bolts
    • Pull the sway bar up
    • Remove the top nut on the opposite side
    • Remove the opposite sway bar link
  2. step : Installing the Sway Bar Link (4:07)
    • Remove the nut, washer, and rubber bumper from the top
    • Insert the sway bar links into place
    • Hand-tighten the nut, washer and bumper on both sides for the top
    • Push the sway bar into place
    • Insert the sway bar end links into the control arms
    • Loosely install the nuts on the bottom of the sway bar end links
    • Insert a 15mm wrench to the hex nut
    • Tighten the 16mm nut on the top
    • Insert an 18mm wrench into the hex nut
    • Tighten the 18mm nut to the bottom
    • Repeat these steps on the opposite side
    • Tighten any sway bar bushing bolts if you loosened them
    • Torque the sway bar bushing bolts to 45 foot-pounds
    • Lower the vehicle to the ground

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
2007 RAM 1500 4x4
Fit perfect and now that I have these, new brakes and rotors and struts, the truck rides great again.
June 14, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
do these have grease fittings?
Jared B on Apr 24, 2018
BEST ANSWER: Hello! Our parts do not come with grease fittings, no. They are pre-greased and guaranteed to last and performed exactly as the factory original did on your vehicle.

Vehicle Fit

  • 2006-2008 Dodge Ram 1500 Truck Quad Cab 4 Wheel Drive Front Sway Bar Link Pair
  • 2006-2008 Dodge Ram 1500 Truck Regular Cab 4 Wheel Drive Front Sway Bar Link Pair
  • 2009-2010 Dodge Ram 1500 Truck 4 Wheel Drive Front Sway Bar Link Pair
  • 2011-2017 Ram 1500 Truck 4 Wheel Drive Front Sway Bar Link Pair

This part replaces:

  • OE # 5170290AD
  • Moog K80894
Part #: 1ASFK02367

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:16 min)