Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time ball joint ends can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Replaces dealer part numbers: 06513 S0X A00, 51320 S0X A02, 06513S0XA00, 51320S0XA02
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:05)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel is frozen in place, kick the tire to loosen it
  2. step : Removing the Stabilizer Link (1:41)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the back of the top stabilizer link bolt
    • Remove the top 18mm nut with a socket and ratchet
    • Pull out the top stabilizer link stud
    • Attach an 18mm wrench to the back of the bottom stabilizer link bolt
    • Remove the bottom 18mm nut with a second 18mm wrench
    • Pull out the stabilizer link
  3. step : Installing the New Stabilizer Link (3:30)
    • Push the lower stabilizer link stud into place
    • Push the upper stabilizer link stud into place
    • Start the two 18mm nuts
    • Tighten the nuts to between 55 - 60 foot-pounds of torque
  4. step : Reattaching the Wheel (4:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
2
0
0
0
Great price and good product service glad I purchased it
December 14, 2017
Purchased
6 months ago
Quality parts ,but installation little hard ,beck bolt(18 mm) very tin ,difficult to hold ,wenn tithing together
October 4, 2017
Purchased
9 months ago
04 odyssey sway bar links
If you are replacing struts make sure to replace these while your at it. Quality is equal to OEM.
May 1, 2017
Purchased
1 year ago
Iam very satisfied with the parts and the price very competitive
March 10, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Acura MDX Front Sway Bar Link Pair
  • 1999-2004 Honda Odyssey Front Sway Bar Link Pair
  • 2003-2005 Honda Pilot Front Sway Bar Link Pair

This part replaces:

  • OE # 06513S0XA00
  • Moog K90349
  • OE # 06513-S0X-A00, 51320S0XA02
  • OE # 06513-S0X-A00, 51320S0XA02 x2
Part #: 1ASFK00237

How-to Video:

(04:51 min)