1ABFS01714-Suzuki Grand Vitara XL-7 Front Semi-Metallic Brake Pad & Rotor Kit

Replaces

Suzuki Grand Vitara XL-7 Front Semi-Metallic Brake Pad & Rotor Kit DIY Solutions

1ABFS01714

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Diameter: 12.20 in. (310mm)
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug

This part replaces:

  • DIY Solutions BFS00613
FREE SAME DAY SHIPPING
Save 32%
List: $102.95 Save: $33.00
Part 1ABFS01714

Out of Stock

Free GROUND SHIPPING

Close



DIY Solutions
Brand #: BFS00613
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Front Brake Rotor Diameter:   12.20 in. (310mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:06)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:17)
    • Remove 14mm and 17mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Rotor (1:39)
    • Remove the 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the Rotor (2:05)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Apply grease to the brake pad tabs
    • Slide the rotor on
    • Put the bracket back into place
    • Insert and tighten the 17mm bolts by hand
    • Tighten the bolts between 80 and 85 foot-pounds of torque
  6. step : Installing the Brake Pads (2:52)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the pistons back
    • Put the caliper on
    • Tighten the 17mm and 14mm bolts
    • Tighten the 17mm bolts between 50 and 55 foot-pounds of torque
    • Tighten the 14mm bolts between 40 and 45 foot-pounds of torque
  7. step : Reattaching the Wheel (3:44)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (4:14)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease
  • Brake Parts Cleaner
  • Brake Fluid
  • Mineral Spirits

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 14mm Socket
  • 19mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1999-2005Suzuki Grand Vitara Suzuki Grand Vitara Front Semi-Metallic Brake Pad & Rotor Kit
2002-2003Suzuki XL-7 Suzuki XL-7 Front Semi-Metallic Brake Pad & Rotor Kit
2004Suzuki XL-7 Suzuki XL-7 Rear Wheel Drive (Built Before VIN 44103256) Front Semi-Metallic Brake Pad & Rotor Kit
2004Suzuki XL-7 Suzuki XL-7 4 Wheel Drive (Built Before VIN 44106615) Front Semi-Metallic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31289
Aimco 31276
Bendix PRT5288
Bendix PRT5296
DIY Solutions BFS00613
DIY Solutions BFS01358
DuraGo BR31289
Raybestos Brakes 96922
Raybestos Brakes 96809
Wagner BD125736

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS00613
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Love ?? your company!!
Great prices!! Good products!! Fast service!! And best of all Free Shipping!!
January 30, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Suzuki Grand Vitara XL-7 Front Semi-Metallic Brake Pad & Rotor Kit DIY Solutions-1ABFS01714 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.