Part Details

  • Quantity: 12 Piece Set
  • Kit Includes:
    (2) Front Lower Ball Joints
    (2) Front Lower Control Arms
    (2) Front Outer Tie Rods
    (2) Front Sway Bar Links
    (2) Steering Rack & Pinion Bellows
    (2) Front Inner Tie Rods

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:38)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (3:26)
    • Remove the two 17mm nuts connecting the ball joint to the control arm
    • Remove the 17mm bolt connecting the ball joint to the control arm
    • Separate the ball joint from the control arm with a pry bar
    • Remove the two 19mm bolts from the front of the control arm
    • Remove the 19mm bolt from the rear of the control arm
    • Remove the control arm with a pry bar
  3. step : Installing the Control Arm (6:25)
    • Put the rear control arm bushing into place
    • Start the 19mm bolt into the control arm bushing
    • Position the control arm, using a pry bar if necessary
    • Insert the longer 19mm bolt into the rear of the control arm bracket
    • Insert the shorter 19mm bolt into the front of the control arm bracket
    • Pry the control arm into place
    • Fasten the 17mm nuts onto the ball joint bracket
    • Insert the 17mm bolt into the ball joint bracket
    • Tighten the two 17mm nuts to 94 foot-pounds of torque
    • Tighten the 17mm bots to 94 foot-pounds
    • Tighten the three 19mm bolts to 152 foot-pounds
  4. step : Reattaching the Wheel (9:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 19mm Socket
  • 17mm Socket
  • 12mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
suspension kit
I was very pleased with this kit. It had everything I needed, Very cost efficient. Was delivered in A reasonable amount of time, Operators were very professional and helpful.No question was left unanswered.Will definitely recomend this product and company.
February 25, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-1996Lexus ES300 Lexus ES300 12 Piece Set Steering & Suspension Kit
1995-1996Toyota Avalon Toyota Avalon 12 Piece Set Steering & Suspension Kit
1992-1996Toyota Camry Toyota Camry 12 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L; 512-58385AL
  • Hollander 512-58289R; 512-58385AR
  • Moog K9877
  • Moog K9499
  • Moog EV301
  • Moog ES3306
  • Moog K90124
  • Moog K620051
  • Moog K620052
  • Beck Arnley 103-2695
  • OE # 88910838
  • OE # 4553533010
  • OE # 48820-33010
  • OE # 48068-33020; 48068-33031
  • OE # 4333039435
  • OE # 48069-33020; 48069-33031
  • OE # 4504629255
Part #: 1ASFK02387


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:29 min)