Replaces

Subaru Wheel Bearing & Hub Assembly TRQ BHA54042 - 1ASHF00336

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

This replacement hub and bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 28373AG00A, 28373AG01A, 28373AG00B, 28373 AG 00A, 28373 AG 01A, 28373 AG 00B
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54042 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:27)
    • Loosen the lug nuts with a 19mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the studs
  2. step : Removing the Brake Pads (1:25)
    • Loosen the two slide bolts from the caliper with a 14mm wrench
    • Remove the slide bolts
    • Compress the brake pad into the piston with a flat blade screwdriver
    • Swing the caliper around and off the brake pads
    • Remove the brake pads from the caliper bracket with a flat blade screwdriver
    • Remove the two 19mm bolts from the caliper bracket
    • Pull the caliper bracket off
    • Remove the brake rotor
  3. step : Removing the Axle Nut (4:11)
    • Insert a punch into the axle nut
    • Tap the bunch with a hammer to release the nut
    • Remove the center cap from the wheel
    • Place the wheel onto the hub and secure the lug nuts by hand
    • Lower the vehicle to the ground
    • Secure the rotor with a pry bar
    • Loosen the 32mm axle nut
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
  4. step : Removing the Hub (6:36)
    • Remove the 10mm bolt from the speed sensor
    • Pry the sensor up
    • Remove the four 14mm bolts from behind the wheel bearing
    • Pull the hub out
    • Tap the hub out from the backing shield a rubber mallet if needed
  5. step : Installing the Hub (11:00)
    • Clean off the mating surface with rust penetrant and a wire brush
    • Insert the hub into place
    • Gently tap the hub into place with a rubber mallet
    • Gently tighten the bolts
    • Torque the bolts 47.9 foot-pounds
    • Place the wheel onto the hub and secure the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the axle nut
    • Torque the axle nut to 177 foot-pounds
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
    • Insert the speed sensor into place
    • Tighten the 10mm bolt to the sensor
  6. step : Installing the Brake Rotor (14:32)
    • Slide the rotor backwards onto the hub
    • Spray the rotor with brake parts cleaner and a rag
    • Turn the rotor over and spray the front with brake parts cleaner
    • Slide the rotor onto the hub
  7. step : Installing the Brake Pads (15:03)
    • Line up the caliper bracket on the wheel
    • Start the 19mm bolts for the caliper bracket
    • Torque the caliper bracket bolts to 47.9 foot-pounds
    • Clean the brake pads with brake parts cleaner
    • Apply caliper grease to the brake pad ears
    • Place the brake pads into the caliper bracket
    • Pull the bungee cord off the brake caliper
    • Put an old brake pad in the caliper
    • Compress the caliper piston with the old brake pad and a C-clamp
    • Swing the caliper onto the caliper bracket
    • Insert the bolts into the caliper
    • Torque the slide bolts to 19 foot-pounds
    • Tap the axle nut down into the axle divot with a hammer and punch to secure it
  8. step : Installing the Wheel (18:51)
    • Slide the wheel onto the studs
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Torque the lug nuts to 90 foot-pounds
    • Pump the brake pedal until the brakes feel firm

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 10mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
2005 outback
Works great on my 2005 subaru outback! !! No worries and fast shipping.
February 18, 2017
Works great!
We gave 1A Auto a try because we needed a wheel bearing and hub for our Subaru. Thought we were going to have to pay over $200 for the part plus the cost of installation. 1A Auto saved the day! Not only did we find the part but it was at a fantastic price. The part came within a few days of ordering and we were able to get it installed with no problems! Part was a perfect fit. I would shop with 1A Auto again and also I highly recommend anyone needing quality auto parts on a tight budget to go with 1A Auto!
March 11, 2017
Great part
The part was an exact fit. When buying a part, there are times when you have to send it back due to the wrong part shipped. This transaction made me very happy. No need to send back. Thank you thank you.
August 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this part 5 lug with ABS?
Laura K June 30, 2017
Yes, this will work for those specifications.
Alex P June 30, 2017
Year Make Model Description
2009-2014Subaru Forester Subaru Forester Wheel Bearing & Hub Assembly Driver or Passenger Side Front TRQ
2008-2014Subaru Impreza Subaru Impreza Wheel Bearing & Hub Assembly Driver or Passenger Side Front TRQ
2008-2014Subaru Impreza WRX Subaru Impreza WRX Wheel Bearing & Hub Assembly Driver or Passenger Side Front TRQ
2005-2014Subaru Legacy Subaru Legacy Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2005-2014Subaru Outback Subaru Outback Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2013-2014Subaru XV Crosstrek Subaru XV Crosstrek Wheel Bearing & Hub Assembly Driver or Passenger Side Front TRQ
Part #: 1ASHF00336


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA54042

How-to Video:

(20:35 min)