1ASHR00264-Toyota Subaru Scion Rear Driver or Passenger Side Wheel Bearing & Hub Assembly

Replaces

Toyota Subaru Scion Rear Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ

1ASHR00264

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits: Direct Fit Replacement
  • Wheel Bearing & Hub Assembly Features & Benefits: Precision Engineered
  • Wheel Bearing & Hub Assembly Features & Benefits: Highest Quality Materials
  • Bearing Type: Ball Bearing

This part replaces:

  • TRQ BHA54354
FREE SAME DAY SHIPPING
Save 27%
List: $95.95 Save: $26.00
Part 1ASHR00264
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA54354

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

BHA54354 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:21)
    • Loosen the 19 mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:16)
    • Remove the 14 mm caliper slide bolts
    • Remove the brake caliper and hang it to relieve tension from the brake hose
    • Remove the two 14 mm caliper bracket mounting bolts
    • Remove the brake caliper mounting bracket
    • Remove the brake rotor
    • If the hand brake shoes are tight against the rotor you can remove the rubber cover and loosen the shoes with the adjuster
  3. step : Removing the Hub and Bearing (5:05)
    • Remove the 32 mm axle nut
    • Remove the four 14 mm bolts at the rear of the knuckle
    • Remove the wheel hub and bearing assembly
  4. step : Some Tips For Removing a Stuck Hub Assembly (6:49)
    • Apply rust penetrant around the hub assembly where it meets the backing plate
    • Hit it with a hammer
    • Apply heat around the hub assembly with a torch
    • Replace one of the mounting bolts not bottomed out all the way, and hammer that to push the hub assembly forward
    • Pry the hub assembly away using a pry bar and hammer
    • Remove the entire backing plate and hammer the hub assembly out from behind
  5. step : Installing the Wheel Hub and Bearing Assembly (25:12)
    • Apply anti-seize to the knuckle and axle splines
    • Insert the 14 mm mounting bolts through the mounting holes
    • Seat the backing plate on the bolts if it came off
    • Insert the hub assembly onto the axle
    • Start all four of the 14 mm bolts into the hub assembly by hand
    • Tighten the 14 mm bolts in a cross pattern
    • Torque the 14 mm bolts in a cross pattern to 48 ft-lb
  6. step : Replacing the Handbrake Hardware (Optional) (28:27)
    • If you did not need to remove the handbrake hardware to remove your wheel hub, you can skip this step
    • Apply brake grease to the brake shoe contact surfaces on the backing plate
    • Connect the front facing brake shoe to the handbrake cable
    • Place the shoe retaining pin through the backing plate and through the shoe, and the locking bracket
    • Turn the pin to lock it in place with the locking bracket
    • Seat the front facing brake shoe in place
    • Mount the rear facing brake shoe onto its retaining pin and lock it in place in the same fashion
    • Seat the rear facing brake shoe in place
    • Insert the top brake shoe bridge plate by first inserting its spring into the front facing brake shoe
    • Connect a shoe spring from the rear facing pad to the top ear
    • Connect a shoe spring from the front facing pad to the top ear
    • Insert the adjuster between the two shoes at the bottom
    • Connect the two shoes at the bottom with the long spring
  7. step : Replacing the Brakes (39:23)
    • Replace the brake rotor onto the wheel studs
    • Adjust the brake shoes with the adjuster if the rotor does not fit
    • Replace the brake caliper bracket with two 14 mm bolts
    • Torque the brake caliper bracket bolts to 49 ft-lb
    • Replace the brake caliper
    • Replace the two 14 mm caliper slider bolts
    • Hold the caliper slider with pliers if it spins
    • Torque the 14 mm caliper slider bolts to 20 ft-lb
    • Pump the brakes to compress the caliper into position
    • Replace the 32 mm axle nut
    • Torque the 32 mm axle nut to 77 ft-lbs
    • Peen over the thin edge of the axle nut into the groove in the axle
  8. step : Replacing the Wheel (48:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19 mm lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Tighten the lug nuts to 85 ft-lb in a star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 32mm Socket
  • 10mm Socket

  • Specialty Tools

  • Blowtorch

  • Wrenches - Metric

  • 14mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2013-2016Scion FR-S Scion FR-S Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2013-2019Subaru BRZ Subaru BRZ Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2019Subaru Crosstrek Subaru Crosstrek Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2009-2013Subaru Forester Subaru Forester Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2014Subaru Impreza Subaru Impreza WRX Limited Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2014Subaru Impreza Subaru Impreza WRX Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2011Subaru Impreza Subaru Impreza 2.5i Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2014Subaru Impreza Subaru Impreza Outback Sport Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2014Subaru Impreza Subaru Impreza Base Model Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2009-2014Subaru Impreza Subaru Impreza WRX Premium Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2009-2010Subaru Impreza Subaru Impreza 2.5 GT Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2010-2011Subaru Impreza Subaru Impreza 2.5i Premium Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Subaru Impreza Subaru Impreza Sport Premium Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Subaru Impreza Subaru Impreza Sport Limited Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Subaru Impreza Subaru Impreza Premium Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Subaru Impreza Subaru Impreza Limited Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2010-2014Subaru Legacy Subaru Legacy Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2010-2014Subaru Outback Subaru Outback Rear Driver or Passenger Side Wheel Bearing & Hub Assembly
2017-2019Toyota 86 Toyota 86 Rear Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Beck / Arnley 051-6361
Beck/Arnley 051-6361
Chicago Rawhide BR930766
MOOG Hub Assemblies 512401
SKF BR930766
Subaru 28473-AG000
Subaru 28473-SC000
Subaru 28473-AG001
Subaru 28473-FG000
Subaru 28473-AJ00A
Timken HA590313

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BHA54354
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Easy peezy
Part came quickly and was a perfect fit. Great cost. I will look to A 1 Auto for future parts , as this was my first purchase .
April 26, 2018
Subaru rear wheel bearing assembly
Excellent description, perfect fit! Once the old one was removed (needed heat to get it unstuck!) it was a simple to replace!
October 7, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Toyota Subaru Scion Rear Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ-1ASHR00264 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.