1APBS00589-Subaru Legacy Outback Rear Ceramic Performance Brake Pad & Rotor Kit

Replaces

Subaru Legacy Outback Rear Ceramic Performance Brake Pad & Rotor Kit

1APBS00589

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Venting Type: Solid
  • Rear Brake Rotor Diameter: 10.79 in. (274mm)
  • Product Line: Performance
  • Brake Rotor Coating: Premium G-Coated
  • Wheel Lug Count: 5 Lug
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 19%
List: $105.95 Save: $20.00
Part 1APBS00589
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12472

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Premium G-Coated
  • Rear Brake Rotor Diameter:   10.79 in. (274mm)
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Premium G-Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:25)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Brake Pads (0:56)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 14mm slide pin bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Rear Brake Rotor (2:27)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    • Or thread M10 bolts into the rotor slot to loosen it
  4. step : Preparing the New Rear Brake Pads and Rotors (5:27)
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Rear Brake Rotor (6:42)
    • Slide the rotor on
    • Apply the adjustor wheel to turn the parking brake shoes in
    • Put the caliper bracket back into place
    • Place copper anti-seize on the 14mm bracket bolts
    • Tighten the 14mm bolts
  6. step : Installing the New Brake Pads (8:42)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the slide pin 14mm bolts
  7. step : Reattaching the Wheel (10:51)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 89 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (11:25)
    • Pump your brakes repeatedly until they feel firm
    • Hold the button and maneuver the emergency brake handle up and down until there is resistance

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Copper Anti-Seize
  • Anti-Seize Grease
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2009Subaru Legacy Subaru Legacy Limited H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2005Subaru Legacy Subaru Legacy i H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2006-2009Subaru Legacy Subaru Legacy 2.5i H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2007-2009Subaru Legacy Subaru Legacy 2.5i Special Edition H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2007-2009Subaru Legacy Subaru Legacy 2.5i Limited H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2008-2009Subaru Legacy Subaru Legacy 3.0 R Limited H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2009Subaru Legacy Subaru Legacy 3.0 R H4 2.5L Rear Ceramic Performance Brake Pad & Rotor Kit
2005-2009Subaru Outback Subaru Outback Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31403
Bendix PRT5752
DIY Solutions BFS01844
DuraGo BR900422
Raybestos EHT1114H
Raybestos SGD1114C
Raybestos MGD1114CH
Raybestos Brakes EHT1114H
Raybestos Brakes MGD1114CH
Raybestos Brakes SGD1114C
Raybestos Brakes 980354
Wagner BD126493

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12472
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Fast free shipping
Appears to be a good product at a really good price. No problem with installation.
December 8, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Subaru Legacy Outback Rear Ceramic Performance Brake Pad & Rotor Kit-1APBS00589 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.