1ABFS01773-Subaru Front Semi-Metallic Brake Pad & Rotor Kit

Replaces

Subaru Front Semi-Metallic Brake Pad & Rotor Kit TRQ BKA11342

1ABFS01773

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Front Brake Rotor Venting Type: Vented
  • Front Brake Rotor Diameter: 11.50 in. (292mm)
  • Wheel Lug Count: 5 Lug
  • Brake Rotor Coating: Premium G-Coated
  • Kit Includes: (2) Front G-Coated Brake Rotors
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • Reference Number MD929
  • OE # 26300AG01A
  • OE # 26300SA001
  • OE # 26300SA000
FREE SAME DAY SHIPPING
Save 28%
List: $131.95 Save: $37.00
Part 1ABFS01773

Out of Stock

Free GROUND SHIPPING

Close



TRQ
Brand #: BKA11342
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Front Brake Rotor Diameter:   11.50 in. (292mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front G-Coated Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Electrostatic Coated Brake Rotor Features and Benefits

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking
Manufactured from OE Grade G3000 Casting Alloy.
G-Coated Brake Kit Features & Benefits
  • Longer life and less dust - Positive molded to ensure even wear and enhanced performance; cleaner wheels
  • Prevent rust - Coated to resist corrosion and withstand 400 hours of saltwater contact
  • Reduce vibration and noise - Balanced, finished surface
  • Cast from premium G3000 alloy for strength and durability

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Brakes (1:52)
    • Have a drain pan and bleeder hose ready
    • Remove the rubber boot from the bleeder screw
    • Loosen the bleeder screw with a 10mm wrench and confirm fluid drips out
    • Apply a brake hose to the bleeder screw
    • Slowly pry the brake pads into the caliper to compress the pistons
    • Tighten the bleeder screw
    • Remove 14mm bolts from the brake caliper
    • Remove the brake caliper and hang it on a caliper hanger
    • Pry the brake pads off with a flat blade screwdriver
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  3. step : Preparing the New Brake Pads and Rotors (14:31)
    • Clean the brake pad clips with a wire brush
    • Apply grease to the brake pad clip surface on the caliper
    • Replace the brake pad clips
    • Apply grease to the caliper slides
    • Clean the wheel hub with a wire brush and rust penetrant
    • Slide the rotor on and secure it by hand with a lug nut
  4. step : Installing the Front Brakes (31:47)
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to 88 foot-pounds of torque
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread 14mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  5. step : Bleeding the Brakes (36:38)
    • Pump the brake pedal slowly a few times with a pry bar until it is firm
    • Check the master cylinder and add the manufacturer's specified brake fluid with a funnel as needed
    • Loosen the bleeder screw with a 10mm wrench
    • Let the fluid drip and inspect it for air bubbles
    • Tighten the bleeder screw
    • Have an assistant press the brake pedal slowly 3-5 times
    • One the last press, hold the panel
    • Loosen the bleeder screw with a 10mm wrench until the fluid seizes
    • Repeat this process until all air bubbles are out of the system
    • Replace the bleeder screw cap
  6. step : Reattaching the Wheel (37:36)
    • Remove the lug nut from the rotor
    • Slide the wheel into place
    • Attach the hub cap
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Torque the lug nuts to 88 ft-lb in a crossing or star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 17mm Wrench
  • 10mm Wrench


Fits the following Makes:

Year Make Model Description
2004-2006Subaru Baja Subaru Baja H4 2.5L Turbo Front Semi-Metallic Brake Pad & Rotor Kit
2009-2010Subaru Forester Subaru Forester Front Semi-Metallic Brake Pad & Rotor Kit
2008-2010Subaru Impreza Subaru Impreza WRX Front Semi-Metallic Brake Pad & Rotor Kit
2009-2010Subaru Impreza Subaru Impreza GT H4 2.5L Turbo Front Semi-Metallic Brake Pad & Rotor Kit
2006-2012Subaru Legacy Subaru Legacy 2.5i Front Semi-Metallic Brake Pad & Rotor Kit
2007-2009Subaru Legacy Subaru Legacy 2.5i Special Edition Front Semi-Metallic Brake Pad & Rotor Kit
2007-2012Subaru Legacy Subaru Legacy 2.5i Limited Front Semi-Metallic Brake Pad & Rotor Kit
2008-2009Subaru Legacy Subaru Legacy 3.0 R Limited Front Semi-Metallic Brake Pad & Rotor Kit
2009Subaru Legacy Subaru Legacy 3.0 R Front Semi-Metallic Brake Pad & Rotor Kit
2010-2012Subaru Legacy Subaru Legacy 3.6R Limited Front Semi-Metallic Brake Pad & Rotor Kit
2010-2012Subaru Legacy Subaru Legacy 3.6R Premium Front Semi-Metallic Brake Pad & Rotor Kit
2010-2012Subaru Legacy Subaru Legacy 3.6R Front Semi-Metallic Brake Pad & Rotor Kit
2010-2012Subaru Legacy Subaru Legacy 2.5i Premium Front Semi-Metallic Brake Pad & Rotor Kit
2005Subaru Outback Subaru Outback H4 2.5L Turbo Front Semi-Metallic Brake Pad & Rotor Kit
2006-2009Subaru Outback Subaru Outback Front Semi-Metallic Brake Pad & Rotor Kit
2010-2012Subaru Outback Subaru Outback H4 2.5L Front Semi-Metallic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 31407
DIY Solutions BFS00634
Raybestos EHT929H
Raybestos Brakes EHT929H

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA11342
Product Reviews
4.00/ 5.0 1
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
2013 Subaru Outback 2.5i Limited Not the correct pads
July 17, 2017
The rotors were exact and quality parts. The pads do not have the required spring return finger which Subaru needs on the Eye Sight equipped vehicles and 1A does not sell them. 1A refunded the money for the pads and were extremely helpful with the order. Just a buyer beware about the pads. All other items were exact. I will monitor this seller and buy the new pads if they get the correct ones in the future. For now had to buy local at my parts store.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Hi would this fit my 05 subaru outback vin number 4s4bp62c257357298?
July 25, 2018
10
According to your VIN, your vehicle has 11.5" front diameter rotors, so these will fit your vehicle.
July 25, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Subaru Front Semi-Metallic Brake Pad & Rotor Kit TRQ BKA11342-1ABFS01773 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.