1ABFS01772-Subaru Front Ceramic Brake Pad & Rotor Kit

Replaces

Subaru Front Ceramic Brake Pad & Rotor Kit

1ABFS01772

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Front Brake Rotor Venting Type: Vented
  • Front Brake Rotor Diameter: 11.50 in. (292mm)
  • Wheel Lug Count: 5 Lug
  • Brake Rotor Coating: Premium G-Coated
  • Kit Includes: (2) Front G-Coated Brake Rotors
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • OE # 26300SA001
  • OE # 26300 AG01A
  • OE # 26300SA000
  • OE # 26300 SA000
  • OE # 26300AG01A
  • OE # 26300 SA001
FREE SAME DAY SHIPPING
Save 23%
List: $135.95 Save: $31.00
Part 1ABFS01772
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA11341

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Ceramic
  • Front Brake Rotor Diameter:   11.50 in. (292mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front G-Coated Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Premium Positive Molded Brake Pads Features and Benefits:

    • The very same manufacturing process the original equipment manufacturers use
    • High density friction material for long pad life
    • Less resin content virtually eliminates brake fade and glazing
    • Reduced dusting for both Ceramic and Semi-metallic materials
    • Quality multi-layered shims and pad chamfering provide smooth and quite braking
    Positive Mold Technology

    Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

    OE Grade Multi-Layer Shim

    Reduces noise and vibration

    Environmentally Compliant

    Meets the Better Brake Law standards

    Thermal Scorched

    Accelerates the break-in process and enhances stopping performance from the first stop.

    100% CNC-Machined to Exact OE Specs

    Balanced to reduce vibration.

    Cast from OE Grade Alloy

    Manufactured from OE Grade G3000 Casting Alloy.

    Non-Directional Surface Finish

    Helps ensure smoother, quieter, and more effective braking.

    Item Condition: New

    Attention California Customers:

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    Lifetime Warranty

    This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    1. step : Removing the Wheel (0:27)
      • Loosen the 19mm lug nuts with the vehicle on the ground
      • Raise the vehicle with a floor jack
      • Secure the vehicle on jack stands
      • Remove the lug nuts
      • Pull off the wheel
    2. step : Removing the Front Brakes (1:52)
      • Have a drain pan and bleeder hose ready
      • Remove the rubber boot from the bleeder screw
      • Loosen the bleeder screw with a 10mm wrench and confirm fluid drips out
      • Apply a brake hose to the bleeder screw
      • Slowly pry the brake pads into the caliper to compress the pistons
      • Tighten the bleeder screw
      • Remove 14mm bolts from the brake caliper
      • Remove the brake caliper and hang it on a caliper hanger
      • Pry the brake pads off with a flat blade screwdriver
      • Remove 17mm bolts from the brake caliper bracket
      • Pull off the brake caliper bracket
      • Pull the rotor off
      • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    3. step : Preparing the New Brake Pads and Rotors (14:31)
      • Clean the brake pad clips with a wire brush
      • Apply grease to the brake pad clip surface on the caliper
      • Replace the brake pad clips
      • Apply grease to the caliper slides
      • Clean the wheel hub with a wire brush and rust penetrant
      • Slide the rotor on and secure it by hand with a lug nut
    4. step : Installing the Front Brakes (31:47)
      • Put the bracket back into place
      • Start the 17mm bolts by hand
      • Tighten the bolts to 88 foot-pounds of torque
      • Install the new brake pads into the bracket
      • Put the caliper on
      • Thread 14mm bolts by hand
      • Tighten bolts to 20 foot-pounds
    5. step : Bleeding the Brakes (36:38)
      • Pump the brake pedal slowly a few times with a pry bar until it is firm
      • Check the master cylinder and add the manufacturer's specified brake fluid with a funnel as needed
      • Loosen the bleeder screw with a 10mm wrench
      • Let the fluid drip and inspect it for air bubbles
      • Tighten the bleeder screw
      • Have an assistant press the brake pedal slowly 3-5 times
      • One the last press, hold the panel
      • Loosen the bleeder screw with a 10mm wrench until the fluid seizes
      • Repeat this process until all air bubbles are out of the system
      • Replace the bleeder screw cap
    6. step : Reattaching the Wheel (37:36)
      • Remove the lug nut from the rotor
      • Slide the wheel into place
      • Attach the hub cap
      • Start the 19mm lug nuts by hand
      • Tighten the lug nuts preliminarily
      • Lower the vehicle partially to the ground
      • Torque the lug nuts to 88 ft-lb in a crossing or star pattern
      • Lower the vehicle completely

    Tools needed for replacement:

      General Tools

    • Hammer
    • Wire Brush

    • Materials, Fluids, and Supplies

    • Rust Penetrant
    • Brake Parts Cleaner

    • Ratchets & Related

    • Socket Extensions
    • Torque Wrench
    • Ratchet
    • 1/2 Inch Breaker Bar

    • Screwdrivers & Related

    • Pry Bar
    • Flat Blade Screwdriver

    • Sockets - Metric

    • 14mm Socket
    • 17mm Socket
    • 19mm Socket
    • 10mm Socket

    • Wrenches - Metric

    • 14mm Wrench
    • 17mm Wrench
    • 10mm Wrench

    Need help? Ask one of our Auto Experts
    Need help? Ask one of our Auto Experts
    Customer Q&A
    Ask a question to 1A Auto customers who purchased the product
    No questions have been asked about this item.

    Fits the following Makes:

    Year Make Model Description
    2004-2006Subaru Baja Subaru Baja H4 2.5L Turbo Front Ceramic Brake Pad & Rotor Kit
    2009-2010Subaru Forester Subaru Forester Front Ceramic Brake Pad & Rotor Kit
    2008-2010Subaru Impreza Subaru Impreza WRX Front Ceramic Brake Pad & Rotor Kit
    2009-2010Subaru Impreza Subaru Impreza GT H4 2.5L Turbo Front Ceramic Brake Pad & Rotor Kit
    2006-2012Subaru Legacy Subaru Legacy 2.5i Front Ceramic Brake Pad & Rotor Kit
    2007-2009Subaru Legacy Subaru Legacy 2.5i Special Edition Front Ceramic Brake Pad & Rotor Kit
    2007-2012Subaru Legacy Subaru Legacy 2.5i Limited Front Ceramic Brake Pad & Rotor Kit
    2008-2009Subaru Legacy Subaru Legacy 3.0 R Limited Front Ceramic Brake Pad & Rotor Kit
    2009Subaru Legacy Subaru Legacy 3.0 R Front Ceramic Brake Pad & Rotor Kit
    2010-2012Subaru Legacy Subaru Legacy 3.6R Premium Front Ceramic Brake Pad & Rotor Kit
    2010-2012Subaru Legacy Subaru Legacy 3.6R Front Ceramic Brake Pad & Rotor Kit
    2010-2012Subaru Legacy Subaru Legacy 3.6R Limited Front Ceramic Brake Pad & Rotor Kit
    2010-2012Subaru Legacy Subaru Legacy 2.5i Premium Front Ceramic Brake Pad & Rotor Kit
    2005Subaru Outback Subaru Outback H4 2.5L Turbo Front Ceramic Brake Pad & Rotor Kit
    2006-2009Subaru Outback Subaru Outback Front Ceramic Brake Pad & Rotor Kit
    2010-2012Subaru Outback Subaru Outback H4 2.5L Front Ceramic Brake Pad & Rotor Kit

    Part Interchange

    Brand Label Part Number
    DIY Solutions BFS00633
    Raybestos MGD929CH
    Raybestos EHT929H
    Raybestos SGD929C
    Raybestos Brakes SGD929C
    Raybestos Brakes EHT929H
    Raybestos Brakes MGD929CH

    This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

    FREE SAME DAY SHIPPING
    TRQ
    Brand #: BKA11341
    Product Reviews
    5.00/ 5.0
    1review
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    1
    0
    0
    0
    0
    Great
    They work great and fit perfectly. trssasddaddadddadaaaaaaaaaaaaaaaaaaaaaaaaaa
    August 27, 2018
    Customer service

    877-844-3393

    Monday - Friday 8:00am - 9:30pm ET
    Saturday - Sunday 8:00am - 4:30pm ET


    Subaru Front Ceramic Brake Pad & Rotor Kit-1ABFS01772 does not fit your:


    Before proceeding,

    select your Vehicle, to verify this Part will fit.

    This part will only fit a vehicle with these options.