MGSFK00065-Subaru Front 2 Piece Sway Bar Link Set

Replaces

Subaru Front 2 Piece Sway Bar Link Set MOOG MGSFK00065

MGSFK00065
FREE SAME DAY SHIPPING
Save 27%
List: $102.95 Save: $28.00
Part MGSFK00065

Out of Stock

Free GROUND SHIPPING

Close



MOOG
Brand #: MGSFK00065
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:06)
    • Use an 18mm wrench to hold the stud in place
    • Use a 15mm socket with a ratchet to untighten the nut
    • Repeat the process for the other end of the link
    • Pull out one end of the link
    • Twist it around, then pull of the other end
  3. step : Reinstalling the Sway Bar Link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  4. step : Reinstalling the Wheel (4:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 foot-pounds in a crossing or star pattern
  5. step : Reinstalling the sway bar link (2:31)
    • Insert one end of the link
    • Insert the other end
    • Hand tighten the nuts on both ends
    • Use a 14mm wrench to hold the stud
    • Use a 15mm socket and ratchet to tighten the nuts
    • Torque the nuts to 23 ft-lbs
  6. step : Reinstalling the wheel (4:16)
    • Put the wheel back on the car
    • Thread on the lug buts by hand
    • Use a 19mm socket to tighten them as much as possible while off the ground
  7. step : Lowering the vehicle (4:31)
    • Use the jack to take the vehicle off the jack stands
    • Lower the car to the ground
  8. step : Torque down the lug nuts (4:34)
    • Torque the lug nuts to 90 ft-lbs in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 18mm Wrench


Fits the following Makes:

Year Make Model Description
2003-2013Subaru Forester Subaru Forester Front 2 Piece Sway Bar Link Set
2002-2007Subaru Impreza Subaru Impreza Sedan Front 2 Piece Sway Bar Link Set
2002-2007Subaru Impreza Subaru Impreza WRX Sedan Front 2 Piece Sway Bar Link Set
2004-2014Subaru Impreza Subaru Impreza WRX STI Front 2 Piece Sway Bar Link Set
2008-2015Subaru Impreza Subaru Impreza Front 2 Piece Sway Bar Link Set
2008-2014Subaru Impreza Subaru Impreza WRX Front 2 Piece Sway Bar Link Set
2005-2009Subaru Legacy Subaru Legacy Front 2 Piece Sway Bar Link Set
2005-2009Subaru Outback Subaru Outback Front 2 Piece Sway Bar Link Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS08582
DIY Solutions SUS08826

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
MOOG
Brand #: MGSFK00065
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
are both sides greasable- or just one side?
April 25, 2019
10
Yes both sides are greasable
April 25, 2019
10
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.
April 25, 2019
10
Both sides
April 25, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Subaru Front 2 Piece Sway Bar Link Set MOOG MGSFK00065-MGSFK00065 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.