In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Part Details

  • Kit Includes: (1) Front Upper Control Arm with Ball Joint

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Full assembly struts
To me this is the only way to purchase struts. No compressing spring tools needed. Unless you really know what you are doing and have spring compression tools, just buy fully assembled units all in one piece. These replaced the old ones perfectly. Quality looks great. I installed them in about 2 hours each side after watching many videos. The only piece of advise is that, after installation and connecting the ball joint, you MUST reach into the upper spring area with wrenches and tighten the arm pivot joint bolts or they will come loose and might fall off. They have to be loose initially so you can connect the ball joint properly. How long these will last I have no idea.
December 25, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Chrysler Cirrus Front Strut & Spring Assembly with Passenger Side
  • 2001-2006 Chrysler Sebring Convertible Front Strut & Spring Assembly with Passenger Side
  • 2001-2006 Chrysler Sebring Sedan Front Strut & Spring Assembly with Passenger Side
  • 1999-2000 Dodge Stratus Front Strut & Spring Assembly with Passenger Side
  • 2001-2006 Dodge Stratus Sedan Front Strut & Spring Assembly with Passenger Side
  • 1999-2000 Plymouth Breeze Front Strut & Spring Assembly with Passenger Side
Part #: 1ASTS01207