In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:47)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:17)
    • Grab the back side of the sway bar with locking pliers
    • Remove the 17mm nut from the sway bar link
    • Remove the sway bar link from the strut
  3. step : Removing the Front Strut (1:51)
    • Remove the 13mm bolt securing the flexible brake hose and ABS harness
    • Remove the lower strut bolts from the spindle with a 15mm open wrench and 21mm socket and breaker bar
    • Tap the bottom bolts out with a hammer
    • Remove the three 13mm bolts on the top of the strut
    • Remove the strut from the vehicle
  4. step : Installing the Front Strut (4:56)
    • Install the strut into the vehicle
    • Tighten the three 13mm bolts to the top of the strut
    • Torque the strut mount bolts to 18 foot-pounds
    • Tighten the 13mm bolts to the bottom of the strut
    • Torque the bolts to 136 foot-pounds
    • Reinstall the 13mm bolts to the ABS harness
  5. step : Installing the Sway Bar Links (2:07)
    • Insert the sway bar link into place
    • Tighten the bar with vise grip pliers
    • Tighten the 17mm nut
    • Torque the top nut to 63 foot-pounds
  6. step : Reattaching the Wheel (7:37)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent service!
Fast shipping, received it way before it was scheduld for delivery. Was as expected. Great price. Easy assembly.
April 17, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007-2009Chevy Equinox Chevy Equinox Front Strut & Spring Assembly Driver Side V6 3.4L (excluding 19 Inch Wheels) TRQ SCA57651
2007-2009Pontiac Torrent Pontiac Torrent Front Strut & Spring Assembly Driver Side V6 3.4L (excluding 19 Inch Wheels) TRQ SCA57651
2008-2010Saturn Vue Saturn Vue XR Front Strut & Spring Assembly Driver Side TRQ SCA57651
2008-2009Saturn Vue Saturn Vue XE All Wheel Drive Front Strut & Spring Assembly Driver Side TRQ SCA57651

This part replaces:

  • Hollander 527-00985L
  • Hollander 527-01710L
  • Monroe 172527
  • Monroe 672527
  • KYB SR4162
  • TRQ SCA57651
Part #: 1ASTS01100


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA57651

How-to Video:

(08:12 min)