Strut & Spring Assembly Pair Rear TRQ SCA57035 - 1ASSP00424

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:25)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Seat (1:13)
    • Pop the rear seat cushion of the two hooks with a pry bar
    • Pull the seat cushion out of the car
    • Open the trunk
    • Pull the seat release lever inside the trunk
    • Fold down the seat backs
    • Pop the seat belts out of the side bolsters
    • Remove the 12mm bolts from the bottom of the bolsters
    • Pull the bolsters up and off
  3. step : Removing the Rear Struts (2:48)
    • Remove the upper 14mm bolt from the sway bar link with a 14mm wrench and counterhold with a 5mm allen bit and ratchet
    • Remove the sway bar link from the strut
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 10mm bolt from the ABS line bracket
    • Loosen the 19mm bolts from the bottom of the strut
    • Tap out the upper bolt with a hammer
    • Remove the three 12mm bolts from atop the strut
    • Remove the lower bolt from the bottom of the strut
    • Lower the strut down and out
  4. step : Installing the Rear Struts (11:53)
    • Insert the strut up into place
    • Insert the top bolt into the strut
    • Tap the bolt in with a hammer and punch if needed
    • Hand-tighten the nut
    • Repeat for the bottom bolt
    • Press the strut up and hand-tighten the upper bolts
    • Tighten the three 12mm bolts atop the strut
    • Torque the top bolts to 29 foot-pounds
    • Torque the top and bottom strut mounting bolts to 133 foot-pounds
    • Tighten the 10mm bolt to the ABS line bracket
    • Tighten the 12mm bolt to the brake line bracket
    • Insert the sway bar link into the strut
    • Tighten the upper 14mm bolt to the sway bar link with a 14mm wrench and counterhold with a 5mm allen bit and ratchet
  5. step : Installing the Rear Seat (16:08)
    • Put the side bolsters into place, using the locating tabs
    • Insert the 12mm bolts into the bottom of the bolsters
    • Pop the seatbelts into the bolsters
    • Fold up the seat backs
    • Put the seat cushion into the car
    • Buckle the seat belts to hold the seat belt buckles in place
    • Push the seat cushion into place
    • Clip on the seat cushion hooks
    • Unbuckle the seat belts
    • Position the seat belt buckles
  6. step : Reattaching the Wheel ()
    • Slide the wheel onto the hub
    • Start the lug nuts onto the studs with the tapered side facing the wheel
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Center Punch

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench
  • 12mm Wrench

4.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Very good service
Everything was perfect...especially the fit...thanks A1
November 1, 2017
I Im writing in regards to the struts I recently ordered I believe they maybe defective or something wrong with them the mounts r making noise an they shouldnt be. Not sure how to go about returning them thank you have a good day
March 19, 2018
Excellent product
These quick struts that I ordered from 1A fits perfectly. I had no problems installing them. I liked the quick service and delivery of this product. I recommend 1A auto to anyone who needs car parts and tell them they are buying high quality parts. 1A auto wont let you down!!
May 16, 2018
Excellent parts
Excellent struts and assembly and very good price Fast shipping
June 16, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will it fit on 2011 camry SE v4?
Tam N October 7, 2016
Yes, these are nonspecific to the submodel and the engine size.
Derek C October 13, 2016
Comfort ride is lost with these struts?
Pa B December 1, 2018
I have not put them in yet.
T R December 1, 2018
The parts should be able to fit the same and provide the same ride as the original struts.
Emma F December 2, 2018
Year Make Model Description
2007-2012Lexus ES350 Lexus ES350 Rear Strut & Spring Assembly Pair TRQ SCA57035
2006Toyota Avalon Toyota Avalon Rear Strut & Spring Assembly Pair (Built After 12/05 Production Date) TRQ SCA57035
2007-2012Toyota Avalon Toyota Avalon Rear Strut & Spring Assembly Pair TRQ SCA57035
2007-2011Toyota Camry Toyota Camry Rear Strut & Spring Assembly Pair TRQ SCA57035
Part #: 1ASSP00424

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: SCA57035

How-to Video:

(18:39 min)