Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

 

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. step : Remove the front shield (1:15)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. step : Remove the Idler Arm (1:25)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. step : Install the new idler arm (4:34)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. step : Reassembly (7:25)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1988-1998Chevy K1500 Truck Chevy K1500 Truck Steering Stabilizer Damper
1988-1998Chevy K2500 Truck Chevy K2500 Truck Steering Stabilizer Damper
1993-1999Chevy Suburban K1500 Chevy Suburban K1500 Steering Stabilizer Damper
1993-1999Chevy Suburban K2500 Chevy Suburban K2500 Steering Stabilizer Damper
1988-1998GMC K1500 Truck GMC K1500 Truck Steering Stabilizer Damper
1988-1998GMC K2500 Truck GMC K2500 Truck Steering Stabilizer Damper
1988-1998GMC K3500 Truck GMC K3500 Truck Steering Stabilizer Damper
1992-1999GMC Suburban K1500 GMC Suburban K1500 Steering Stabilizer Damper
1992-1999GMC Suburban K2500 GMC Suburban K2500 Steering Stabilizer Damper
1992-1998GMC Yukon GMC Yukon 4 Wheel Drive Steering Stabilizer Damper
1984-2001Jeep Cherokee Jeep Cherokee Steering Stabilizer Damper
1986-1992Jeep Comanche (MJ) Jeep Comanche (MJ) Steering Stabilizer Damper
1993-2006Jeep Grand Cherokee Jeep Grand Cherokee Steering Stabilizer Damper
1984-1990Jeep Wagoneer Jeep Wagoneer Steering Stabilizer Damper
1987-1995Jeep Wrangler Jeep Wrangler Steering Stabilizer Damper
1997-2006Jeep Wrangler Jeep Wrangler Steering Stabilizer Damper
Part #: 1ASSL00618


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:13 min)